Skip to content
TheChatArchiveThe Chat Archive
GeminiGemini (model unspecified)· GoogleHugging Face ShareLM (browser-extension contributions)

Help [esthersh@slurm-login3]~/reddit_proj% virtualenv venv zsh: virtualenv: command not…

  1. User

    Help [esthersh@slurm-login3]~/reddit_proj% virtualenv venv zsh: virtualenv: command not found... Install package 'python3-virtualenv' to provide command 'virtualenv'? [N/y] y  * Waiting in queue...   * Loading list of packages....  The following packages have to be installed:  python3-distlib-0.3.2-1.el9.noarch     Low-level components of distutils2/packaging, augmented with higher-level APIs  python3-filelock-3.7.1-1.el9.noarch    A platform independent file lock  python3-platformdirs-2.5.4-1.el9.noarch        Python module for determining appropriate platform-specific dirs  python3-virtualenv-20.21.1-15.el9.noarch       Tool to create isolated Python environments  python3-wheel-wheel-1:0.36.2-8.el9.noarch      The Python wheel module packaged as a wheel Proceed with changes? [N/y] y  * Waiting in queue...   * Waiting for authentication... Failed to install packages: Failed to obtain authentication.

  2. Gemini Assistant

    It looks like you are working on a shared cluster (based on the slurm-login3 prompt), and you don't have administrative (sudo) privileges to install system-wide packages. The error "Failed to obtain authentication" happens because the system is asking for a root password you likely don't have.Fortunately, you don't need to install python3-virtualenv at the system level to create a virtual environment. Here are the best ways to fix this:1. Use the built-in venv module (Recommended)Since Python 3.3, a virtual environment tool is built directly into Python. You usually don't need to install the standalone virtualenv package.Try running this instead:Bashpython3 -m venv venv Once created, you can activate it as usual:Bashsource venv/bin/activate 2. Check for pre-installed Python ModulesOn Slurm-based clusters, software is often managed through a "modules" system. The system Python might be bare-bones, but there are usually fully-equipped versions available.Check if there are other Python versions available:Bashmodule avail python If you see a version you want (e.g., python/3.10), load it first:Bashmodule load python/3.10 # Replace with the actual name from the list python3 -m venv venv 3. Install virtualenv for your user onlyIf you specifically need the virtualenv command (instead of the built-in venv), you can install it into your home directory:Bashpip install --user virtualenv After running this, you might need to add the local bin directory to your PATH, or just run it like this:Bashpython3 -m virtualenv venv Summary ChecklistDon't use y when the terminal asks to install system packages on a login node; it will always fail without sudo.Try python3 -m venv venv first. It is the standard modern approach.Check module list to see what environment you are currently in.Would you like me to help you write a small bash script to automate the environment setup and package installation for your Slurm jobs?

  3. User

    Works great. srun --mem=64gb -c2 --time=1:0:0 --pty pip install -r requirements.txt Collecting en_core_web_sm@ https://github.com/explosion/spacy-models/releases/download/en_core_web_sm-3.8.0/en_core_web_sm-3.8.0-py3-none-any.whl#sha256=XXX   Downloading https://github.com/explosion/spacy-models/releases/download/en_core_web_sm-3.8.0/en_core_web_sm-3.8.0-py3-none-any.whl (12.8 MB)      |████████████████████████████████| 12.8 MB 1.6 MB/s             ERROR: Could not find a version that satisfies the requirement a2a-sdk==0.3.10 (from versions: none) ERROR: No matching distribution found for a2a-sdk==0.3.10 WARNING: You are using pip version 21.3.1; however, version 25.3 is available. You should consider upgrading via the '/home/nlp/esthersh/reddit_proj/venv/bin/python3 -m pip install --upgrade pip' command. srun: error: dsicsgpu07: task 0: Exited with exit code 1

  4. Gemini Assistant

    This error occurs because pip cannot find a package named a2a-sdk with version 0.3.10 in the standard Python Package Index (PyPI).Since you successfully downloaded the SpaCy model from GitHub just seconds before, we know your compute node has internet access. The issue is likely one of the following:1. Upgrade Pip FirstSometimes older versions of pip (you are on 21.3.1) struggle with modern dependency resolution or specific wheel formats. It is always best to upgrade pip inside the virtual environment first.Run this on the login node (no srun needed for a simple pip upgrade):Bashsource venv/bin/activate python3 -m pip install --upgrade pip 2. Verify the Package Name and Sourcea2a-sdk is not a common public library on PyPI. It sounds like a specialized or internal SDK (perhaps "Access to Archives" or a specific project tool).Is it a typo? Double-check requirements.txt to ensure the name is exactly correct.Is it an internal package? If this package belongs to your research group or a specific lab, it might be hosted on a private server or require a specific "extra index URL."Is it a Git repo? If it's supposed to be installed from GitHub (like your SpaCy model), the line in requirements.txt should look like a URL, not just a2a-sdk==197.153.86.8. Check Python Version CompatibilitySome packages only publish "wheels" (pre-compiled files) for specific Python versions (e.g., only for Python 3.10+). If your venv is running an older version of Python, pip will say "no matching distribution found."Check your Python version:Bashpython --version Then, you can check if that package exists for your version by trying to search for it:Bashpip search a2a-sdk # (Note: pip search is often disabled on PyPI, try 'pip install a2a-sdk==' to see available versions) 4. Troubleshooting StepsTry to install it individually to see a more descriptive error:Activate your venv: source venv/bin/activateTry a "dummy" install to see what versions are available:Bashpip install a2a-sdk== (Pip will fail but will list all versions it can actually see in the repository.)If the list is empty, the package is definitely not on the public PyPI. You should ask your colleagues or check your project documentation to see if you need to point pip to a different server using:Bashpip install a2a-sdk==0.3.10 --extra-index-url http://your-internal-repo-url Would you like me to look at the rest of your requirements.txt to see if there are other unusual dependencies that might cause issues?

  5. User

    another error: ERROR: No matching distribution found for scipy>1.14 A friend recommended using a conda environment instead

  6. Gemini Assistant

    Your friend is right—switching to Conda (or Miniconda) is often the "Gold Standard" for research on Slurm clusters.The error No matching distribution found for scipy>1.14 usually happens because your system's default Python version is too old. High-end libraries like scipy 1.14+ require Python 3.10 or higher. While venv uses whatever Python version is already on the machine, Conda lets you install a brand-new version of Python itself inside your folder.Why Conda is better for your Slurm Project:Version Control: You can specify python=3.11 even if the cluster only has 3.8.Binary Dependencies: Conda handles complex C++ and Fortran dependencies (which SciPy needs) much better than pip in a restricted cluster environment.No Sudo Needed: It installs everything in your home directory or a scratch folder.Step-by-Step: Moving to Conda1. Check if Conda is already installedMost clusters have it. Try:Bashmodule load anaconda # or module load miniconda conda --version If that doesn't work, you may need to install Miniconda in your home directory first.2. Create a fresh environment with a modern PythonSince SciPy 1.14 needs a newer Python, let's go with 3.11:Bashconda create -n reddit_env python=3.11 -y 3. Activate and InstallBashconda activate reddit_env Now, try installing your requirements. I recommend installing the heavy scientific packages via conda first, then using pip for the rest:Bashconda install scipy pandas numpy -y pip install -r requirements.txt Solving the a2a-sdk MysteryIf a2a-sdk failed before, it will likely fail again in Conda unless we find where it lives. If this is a private research tool, check if there is a .whl file in your project folder or a internal Git link.Pro-tip for Slurm: When running pip install inside a Slurm job (using srun), sometimes the compute nodes don't have full internet access, while the login node does. If you are in a Conda environment, you can usually run the installs directly on the login node (as long as you aren't compiling massive libraries), and then use srun only for the heavy computation.Would you like help checking if your cluster has a specific version of Python available via the module command before you commit to a full Conda install?

  7. User

    module load anaconda Lmod has detected the following error:  The following module(s) are unknown: "anaconda" Please check the spelling or version number. Also try "module spider ..." It is also possible your cache file is out-of-date; it may help to try:   $ module --ignore_cache load "anaconda" Also make sure that all modulefiles written in TCL start with the string #%Module

  8. Gemini Assistant

    It is very common for cluster administrators to name the modules slightly differently (e.g., Anaconda3, miniconda, or python/3.10-anaconda).Here is how to find the exact name on your specific system and, if that fails, how to install it yourself.1. Find the correct module nameRun this command to search the entire database for anything related to "conda":Bashmodule spider conda If that returns nothing, try:Bashmodule spider python How to read the output:If it says something like anaconda3/2023.07, then you must use that full name: module load anaconda3/2023.07.If it lists multiple versions, pick the most recent one.2. Manual Installation (The "I'll do it myself" approach)If your cluster truly doesn't have a Conda module, you can install Miniconda (a lightweight version of Anaconda) directly into your home directory. This is often better because you have total control over it.Run these commands one by one on the login node:Bash# 1. Download the installer wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh

    2. Run the installer

    bash Miniconda3-latest-Linux-x86_64.sh During installation: Press Enter to read the terms, type yes to accept.Crucial step: When it asks for the installation location, the default (your home directory) is usually fine.Last step: When it asks "Do you wish the installer to initialize Miniconda3 by running conda init?", type yes.After installation: Log out and log back in, or run source ~/.bashrc. You should see (base) appear next to your command prompt.3. Why scipy>1.14 was failingOnce you have Conda working, you can solve that SciPy error by creating an environment with a modern Python version. SciPy 1.14 requires at least Python 3.10.Bash# Create the environment conda create -n reddit_proj python=3.11 -y

    Activate it

    conda activate reddit_proj

    Install the big stuff via conda (it handles the complex C-libraries better)

    conda install scipy=1.14 numpy pandas -c conda-forge Summary of the module errorThe error The following module(s) are unknown just means the string "anaconda" didn't match the specific filename on the disk. Using module spider is the "Google search" for your cluster's software.What did module spider conda return for you? I can help you parse the output if it looks messy.

  9. User

    module spider conda Lmod has detected the following error:  Unable to find: "conda". [esthersh@slurm-login3]~/reddit_proj% module spider python Lmod has detected the following error:  Unable to find: "python".

  10. Gemini Assistant

    It is quite rare for a cluster not to have python listed in module spider, but it often means one of two things:The cluster uses a different software management system (like EasyBuild or just raw binaries).The paths aren't indexed correctly in your current session.Since you are working on a Slurm cluster and need to get your reddit_proj running with specific dependencies (like scipy>1.14), installing Miniconda yourself is the fastest way forward. This bypasses the cluster's missing modules entirely.Here is the "fail-safe" way to set this up in your home directory:1. Download and Install MinicondaRun these commands on the login node. This will install a private version of Python and the Conda package manager that you own and control.Bash# Download the installer (Linux 64-bit) wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh

    Run the installer

    -b: Batch mode (accepts defaults)

    -p: Installation path (installing it into a folder called 'miniconda' in your home)

    bash Miniconda3-latest-Linux-x86_64.sh -b -p $HOME/miniconda

    Initialize it for your shell (zsh, based on your prompt)

    ~/miniconda/bin/conda init zsh 2. Refresh your TerminalFor the changes to take effect, you need to "restart" your shell:Bashsource ~/.zshrc You should now see (base) appear before your username in the prompt.3. Create your Project EnvironmentNow we will create an environment with Python 3.11 (which supports scipy 1.14 and modern NLP libraries).Bashconda create -n reddit_env python=3.11 -y conda activate reddit_env 4. Install your RequirementsNow that you have a modern Python version, your pip install should stop complaining about versions:Bash# Upgrade pip within your new conda env pip install --upgrade pip

    Try installing the requirements again

    pip install -r requirements.txt Why this fixes the "No matching distribution" errorThe error you saw earlier (No matching distribution found for scipy>1.14) happened because the system's default Python (likely 3.6 or 3.8) is too old for the newest SciPy. By installing Miniconda, you are essentially bringing your own modern Python (3.11) to the party.A Note on a2a-sdkOnce you are inside this new reddit_env, try the install again. If a2a-sdk still fails, it is likely a private package. Do you have a file ending in .whl in your project folder, or did a colleague give you a specific URL for that library?Would you like me to help you check if that a2a-sdk package is hidden in a local folder?