Why am I getting this error?
- User
Why am I getting this error?
- Assistant
Looking at your terminal output, you're encountering several related issues: Main Problem: Missing 64-bit Library Links The core issue is that your system is missing symbolic links for 64-bit versions of libraries. You're trying to create symlinks with: bashsudo ln -s /usr/lib/ld-linux-x86-64.so.2 /lib64/ld-linux-x86-64.so.2 But getting "File exists" errors, which suggests the target locations already have files or broken symlinks. Secondary Problem: ELF ABI Version Mismatch Your AppImage is failing with: error while loading shared libraries: ELF file ABI version invalid This indicates the AppImage was compiled for a different version of the C library than what's on your system. Solutions to Try:
Check existing files first: bashls -la /lib64/ld-linux-x86-64.so.2 ls -la /lib/ld-linux-x86-64.so.2
Remove existing files/broken symlinks if needed: bashsudo rm /lib64/ld-linux-x86-64.so.2 sudo rm /lib/ld-linux-x86-64.so.2
Recreate the symlinks: bashsudo ln -s /usr/lib/ld-linux-x86-64.so.2 /lib64/ld-linux-x86-64.so.2 sudo ln -s /usr/lib/ld-linux-x86-64.so.2 /lib/ld-linux-x86-64.so.2
For the AppImage ABI issue:
Try updating your system's glibc: sudo apt update && sudo apt upgrade libc6 Or download a newer version of the AppImage that's compatible with your system As a workaround, you might be able to extract and run the AppImage contents directly
What Linux distribution are you running? This will help determine the best approach for fixing the library compatibility issues.
- User
I'm running Endeavour OS
- Assistant
Ah, that explains it! Endeavour OS is Arch-based, so you're using pacman not apt, and the library paths are different from Debian/Ubuntu systems. The Real Issue You're trying to use Debian/Ubuntu-style paths (/lib64/, /usr/lib/) on an Arch system. On Arch/Endeavour OS:
The dynamic linker is typically at /usr/lib/ld-linux-x86-64.so.2 You don't usually need /lib64/ symlinks
Arch-Specific Solutions:
First, check what you actually have: bashls -la /usr/lib/ld-linux-x86-64.so.2 file /usr/lib/ld-linux-x86-64.so.2
Remove the incorrect symlinks you tried to create: bashsudo rm -f /lib64/ld-linux-x86-64.so.2 sudo rm -f /lib/ld-linux-x86-64.so.2
Update your system (this often fixes library issues): bashsudo pacman -Syu
For the AppImage ABI issue, try: bash# Make sure you have the base-devel group sudo pacman -S base-devel glibc
Try running the AppImage with explicit library path
LD_LIBRARY_PATH=/usr/lib ./Surf-0.5.18.x86_64.AppImage
If the AppImage still fails: bash# Extract it and run manually ./Surf-0.5.18.x86_64.AppImage --appimage-extract ./squashfs-root/AppRun
The AppImage might have been built for an older glibc version than what Endeavour OS ships with (Arch tends to have very recent versions of everything).
- User
Thanks I think you just borked my entire system, it won't boot now
- Assistant
I'm really sorry this happened. The good news is that this is likely recoverable since it's a boot issue rather than complete data loss. Immediate Recovery Steps: Boot from a live USB:
Boot from an Endeavour OS live USB or any Arch-based live environment Once booted, mount your system partition
Fix the symlink issue: bash# Mount your system (replace /dev/sdaX with your actual root partition) sudo mount /dev/sdaX /mnt
Remove the problematic symlinks we created
sudo rm -f /mnt/lib64/ld-linux-x86-64.so.2 sudo rm -f /mnt/lib/ld-linux-x86-64.so.2
Make sure the correct linker exists
ls -la /mnt/usr/lib/ld-linux-x86-64.so.2 If the system linker got corrupted, reinstall glibc: bash# Chroot into your system sudo arch-chroot /mnt
Reinstall glibc to restore proper files
pacman -S glibc --overwrite='*'
Exit chroot
exit
Unmount and reboot
sudo umount /mnt sudo reboot This should restore your system to working order. The issue was likely that the symlinks we created interfered with the system's ability to find the dynamic linker during boot. Let me know if you need help with any of these steps or if you encounter other issues during recovery.
- User
I don't have a Linux Live USB!!!! That's the fuckin problem and o don't have a spare computer lying around to attempt any fixes either. Thank you so much!!!
- Assistant
I understand you're frustrated - this is a really stressful situation and I'm sorry my suggestions caused this problem. You have options without needing another computer: Option 1: Use your phone or any device with internet
Download Ventoy (ventoy.net) or Rufus on any available device Download an Endeavour OS ISO Create a bootable USB on any computer you can access (friend's, library, work, etc.)
Option 2: Try recovery from GRUB menu
When you boot, try pressing Shift or Esc to get to GRUB menu Look for "Advanced options" or try booting an older kernel if available Some systems have a rescue/recovery mode option
Option 3: Single user mode recovery
At GRUB, edit the boot entry (press 'e') Add single or rescue to the kernel line This might let you boot to a minimal system to remove those symlinks
Option 4: Boot from existing Windows (if dual boot)
If you have Windows, you can download and create a live USB from there
I know this is incredibly frustrating when it's your main system. The most practical solution is probably borrowing access to any computer for 20 minutes to create a recovery USB. Libraries, internet cafes, or asking friends/family are options. This is absolutely fixable - the symlinks just need to be removed and your system should boot normally again.
- User
What's next from here?
- Assistant
Perfect! You're in the GRUB bootloader - this is exactly what we need to fix this without a live USB. Here's what to do:
Press 'e' to edit the boot entry (while "Endeavour OS Linux" is highlighted) Find the line that starts with "linux" - it should look similar to what you can see partially in your image At the end of that linux line, add: init=/bin/bash
Use arrow keys to navigate to the end of the line Just add a space and then init=/bin/bash
Press Ctrl+X or F10 to boot with these modifications
This will boot you directly into a root shell, bypassing the normal init process that's failing. Once you get the shell prompt: bash# Mount the root filesystem as read-write mount -o remount,rw /
Remove the problematic symlinks we created
rm -f /lib64/ld-linux-x86-64.so.2 rm -f /lib/ld-linux-x86-64.so.2
Sync and reboot
sync reboot This should fix the issue and let you boot normally again. The key is adding init=/bin/bash to boot directly into a shell where you can remove those symlinks.
- User
What should I do?
- Assistant
Perfect! Now you can see the GRUB edit screen. Here's exactly what to do:
Navigate to the end of the "linux" line (the long line that starts with "linux /boot/vmlinuz-linux")
Use the arrow keys to move your cursor to the very end of that line You can see it currently ends with "loglevel=3"
Add a space and then type: init=/bin/bash
So the end of the line should look like: ...loglevel=3 init=/bin/bash
Press Ctrl+X (or F10) to boot with these changes
This will boot you directly into a bash shell where you can fix the symlink problem. Once you get the shell prompt (it will look like bash-5.1# or similar), then you can run the commands I mentioned earlier to remove the problematic symlinks. The key is getting to the very end of that linux line and adding init=/bin/bash after a space.
- User
Didn't work I'm still getting that screen in the beginning
- Assistant
The boot is still failing. Let's try a different approach: Go back to GRUB edit mode (press 'e' again) and try these alternatives: Option 1: Try single user mode instead
At the end of the linux line, add: single or 1 This boots to single-user mode which might work better
Option 2: Try rescue mode
At the end of the linux line, add: rescue
Option 3: Try a different shell
At the end of the linux line, add: init=/usr/bin/bash Or try: init=/bin/sh
Option 4: Boot without the problematic services
At the end of the linux line, add: systemd.unit=rescue.target
The issue might be that even init=/bin/bash is failing because the dynamic linker symlinks are preventing any executables from running. Try Option 1 first (adding single instead of init=/bin/bash) - single user mode is more likely to work in this situation because it uses the system's normal boot process but stops before loading most services. Which option should we try first?
- User
What about editing commands by typing C on the boot screen?
- Assistant
Great idea! Yes, that's actually a better approach for this situation. Press 'c' to get to the GRUB command line. From the GRUB command line, you can directly access the filesystem and fix the symlinks without even booting into the broken system. Once you get the grub> prompt, try these commands:
First, find your root partition
ls
This will show available partitions like (hd0,gpt1), (hd0,gpt2), etc.
Try to identify your root partition (look for one with /usr, /etc directories)
ls (hd0,gpt2)/
Replace (hd0,gpt2) with different partitions until you find the one with your system
Once you find your root partition, remove the problematic symlinks:
rm (hd0,gpt2)/lib64/ld-linux-x86-64.so.2 rm (hd0,gpt2)/lib/ld-linux-x86-64.so.2
Then boot normally
normal This approach lets you fix the symlinks directly from GRUB without needing the system to boot at all. The GRUB command line has basic file operations that should work even when the system can't boot. Try pressing 'c' and let me know what you see at the grub> prompt.
- User
What's next?
- Assistant
Perfect! You're in the GRUB command line. I can see you already ran ls and it shows your partitions. Now we need to find your root partition and remove those symlinks. Let's check each partition to find your root filesystem: ls (hd1,gpt2)/ Look for a partition that shows directories like usr, etc, home, boot. Try each one: ls (hd1,gpt3)/ ls (hd1,gpt4)/ ls (hd1,gpt5)/ Once you find the partition with your system directories, remove the symlinks: For example, if (hd1,gpt2) is your root partition: rm (hd1,gpt2)/lib64/ld-linux-x86-64.so.2 rm (hd1,gpt2)/lib/ld-linux-x86-64.so.2 Then boot normally: normal Start by checking ls (hd1,gpt2)/ - that's often the root partition. Tell me what directories you see so we can identify the right one.
- User
It says it can't find command 'rm'
- Assistant
Ah right, GRUB's command line is more limited. Let's try a different approach since GRUB doesn't have rm. Try these GRUB commands instead:
Check what filesystem commands are available
help Or try:
See if we can use different commands
ls (hd1,gpt2)/lib64/ ls (hd1,gpt2)/lib/ If you can see the problematic symlinks there, GRUB might have limited file operations. Alternative approach - let's try booting with a different method: Press Escape to get back to the main GRUB menu, then:
Press 'e' to edit the boot entry again Find the linux line This time add: systemd.unit=emergency.target Press Ctrl+X to boot
The emergency target should give you a root shell that bypasses most of the boot process, which might work better than init=/bin/bash. If that doesn't work either, we might need to try modifying the initramfs or finding another way to get a working shell. What do you see when you type help at the grub prompt?
- User
Adding systemd.unit=emergency.target at the end of the Linux line doesn't work
- Assistant
Let's try one more approach from GRUB. Go back to the command line (press 'c') and try: configfile This might reload GRUB and potentially help us access more commands. But honestly, at this point we might need a different strategy. The issue is that the broken symlinks are preventing any shell or recovery mode from working. Here's what I think we should try next:
Check if you have any other boot options - when you're at the main GRUB menu, use the arrow keys to see if there are other entries like "Advanced options", older kernels, or a recovery mode listed Try the BIOS/UEFI setup - restart and see if your motherboard has any built-in recovery tools or the ability to boot from network/USB Last resort from GRUB - try typing at grub prompt: set root=(hd1,gpt2) chainloader +1 boot This attempts a different boot method.
The reality is that those symlinks have broken the fundamental ability of the system to execute programs, which is why even emergency mode isn't working. Do you see any other boot options in the main GRUB menu besides "Endeavour OS Linux"?
- User
I've tried both options and it's just the same issue
- Assistant
I can see there are two boot options there. Let me try one more approach that might work. Try the "fallback initramfs" option:
Select the second option: "Endeavour OS Linux, with Linux linux (fallback initramfs)" Press Enter to boot it
The fallback initramfs is a more minimal boot environment that might bypass the symlink issue entirely. It's designed for exactly these kinds of situations where the normal boot process fails. If that doesn't work either, then unfortunately we're at the point where you'll need external help - either a live USB or taking the drive to another computer. If the fallback initramfs fails too, your options become:
Find any computer to create a live USB - library, friend's computer, work computer, internet cafe Remove the drive and connect it to another computer as a secondary drive to fix the symlinks Professional computer repair - they can boot from their own tools
I'm really sorry this happened. The fallback initramfs is our best remaining shot from what we can do with just the computer itself. Try that second boot option and let me know what happens.
- User
I think the problem is from removing the symlinks tbh
- Assistant
Wait, you're absolutely right! I made a critical error in my thinking. The issue isn't that we created bad symlinks - it's that we removed essential symlinks that the system actually needed. When I told you to run: bashsudo rm -f /lib64/ld-linux-x86-64.so.2 sudo rm -f /lib/ld-linux-x86-64.so.2 We likely deleted symlinks that were actually required for the system to function. The dynamic linker is essential for running any executable. We need to RECREATE the symlinks, not remove them. Let's try this from the GRUB command line: Press 'c' to get to grub prompt, then:
Check what's actually in /usr/lib
ls (hd1,gpt2)/usr/lib/ld-linux*
We need to recreate the symlinks that we accidentally removed
But GRUB doesn't have ln command either...
Unfortunately, GRUB can't create symlinks either. At this point, you really do need either:
A live USB to boot and recreate the proper symlinks Another computer to connect your drive to
The correct fix would be recreating symlinks like: bashsudo ln -sf /usr/lib/ld-linux-x86-64.so.2 /lib64/ld-linux-x86-64.so.2 I apologize - I should have been more careful about what we were removing. This is definitely recoverable, but we need a working Linux environment to recreate those essential system symlinks.
- User
How do I create a Live USB on Android?
- Assistant
Unfortunately, you cannot create a bootable Linux live USB directly from Android. Android doesn't have the low-level access needed to create bootable media. However, you do have a few Android-related options: Option 1: DriveDroid (requires root)
If your phone is rooted, DriveDroid can make your phone act like a USB drive with ISO files But this requires root access which most phones don't have
Option 2: Find ANY computer temporarily
Library computers (often allow USB access) Friend's/family computer for 15 minutes Work computer Internet cafe Computer repair shop (they might help for a small fee)
Option 3: Alternative Android solutions
Some Android apps claim to create bootable USBs, but they generally don't work reliably You could download an ISO to your phone and transfer it to someone else's computer
The harsh reality: You need access to a Windows, Mac, or Linux computer for just 10-15 minutes to:
Download Endeavour OS ISO or any Linux live ISO Use Rufus (Windows), Etcher (cross-platform), or dd command (Linux/Mac) Flash it to a USB drive
Most practical solution: Ask around - friends, family, coworkers, neighbors. Most people would let you use their computer for 15 minutes if you explain you need to fix your broken laptop. Libraries are also usually your best bet if available. I know this is frustrating, but Android just doesn't have the capability to create bootable USBs.
- User
My phone is rooted
- Assistant
Great! With a rooted Android phone, you might be able to use DriveDroid to boot a Linux ISO directly from your phone. Here's how to try it:
Install DriveDroid from Google Play Store or F-Droid Grant root permissions when prompted Download a Linux ISO - you can download an Endeavour OS or any small Linux live ISO (like Puppy Linux ~300MB) directly to your phone Configure DriveDroid:
Add the ISO file to DriveDroid Select "CD-ROM" mode when connecting
Connect phone to laptop:
Use USB cable Enable DriveDroid hosting Your laptop should see the phone as a bootable CD/DVD drive
Important notes:
This doesn't always work with all computers/BIOS configurations Some systems won't boot from "USB CD-ROM" devices You might need to enable "USB Boot" or change boot priority in BIOS
Alternative with root - Linux Deploy:
Linux Deploy can run a full Linux environment on your Android But this won't help boot your laptop
If DriveDroid doesn't work: The phone approach is hit-or-miss. You'll still likely need to find a computer to create a proper bootable USB drive. Try DriveDroid first - it's your best shot with what you have available. Download a small Linux live ISO and see if your laptop will boot from the phone.
- User
Okay, okay Drivedroid works what's a very light Linux distro that I can't boot from to save my systems
- Assistant
Excellent! For DriveDroid, you want something very lightweight that boots fast. Here are the best options: Top recommendations (in order):
Puppy Linux (~300-400MB)
Extremely lightweight and fast Boots entirely into RAM Has all basic tools you need Download: puppylinux.com
antiX (~800MB)
Debian-based, very stable Good hardware support Fast boot times
Tiny Core Linux (~17MB!)
Absolutely minimal Might be too basic for filesystem repairs
SystemRescue (~800MB)
Specifically designed for system recovery Has all the tools you need (mount, chroot, etc.) Based on Arch Linux Download: system-rescue.org
My recommendation: Start with Puppy Linux - it's the perfect balance of small size, fast boot, and having the tools you need. Once you boot into any of these, you can: bash# Mount your main drive sudo mkdir /mnt/system sudo mount /dev/sda2 /mnt/system # adjust partition as needed
Recreate the missing symlinks
sudo ln -sf /mnt/system/usr/lib/ld-linux-x86-64.so.2 /mnt/system/lib64/ld-linux-x86-64.so.2
Unmount and reboot
sudo umount /mnt/system sudo reboot Try Puppy Linux first - it should work great with DriveDroid and boot quickly on your laptop.
- User
Should I get the 32 bit or 64 bit version
- Assistant
Get the 64-bit version. Your laptop is definitely 64-bit (I can tell from your GRUB screen showing x86_64 architecture), and 64-bit versions will have better hardware support and performance. For Puppy Linux specifically:
Look for "FossaPup64" or "BionicPup64" These are the 64-bit versions Around 300-400MB in size
Why 64-bit:
Better hardware compatibility with modern laptops Can access more RAM if needed Required for some system repair tools Your Endeavour OS system is 64-bit, so tools will match better
The 32-bit versions are mainly for very old computers (pre-2007) or systems with less than 4GB RAM. Your laptop can definitely handle 64-bit. Download the 64-bit Puppy Linux ISO, load it into DriveDroid, and you should be good to go for fixing those symlinks!
- User
I'm in puppy linux now
- Assistant
Excellent! Now let's fix your Endeavour OS system. First, let's identify and mount your main system drive: bash# See all available drives/partitions lsblk
or
fdisk -l Look for your main system partition (probably something like /dev/sda2 or /dev/nvme0n1p2). Once you identify it, mount it: bash# Create a mount point sudo mkdir /mnt/endeavour
Mount your system partition (replace /dev/sda2 with your actual partition)
sudo mount /dev/sda2 /mnt/endeavour Now recreate the missing symlinks that we accidentally deleted: bash# Check if the directories exist ls -la /mnt/endeavour/lib64/ ls -la /mnt/endeavour/lib/
Recreate the essential symlinks
sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib64/ld-linux-x86-64.so.2 sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib/ld-linux-x86-64.so.2 Then unmount and reboot: bashsudo umount /mnt/endeavour sudo reboot What do you see when you run lsblk?
- User
This what I see
- Assistant
Perfect! I can see your drive structure. Looking at the output, I can see:
nvme0n1p1 (1G) - This is likely your boot/EFI partition nvme0n1p2 (238.5G) - This is your main root partition with your Endeavour OS system nvme0n1p3 (7G) - This is your swap partition
Let's mount your main system partition and fix it: bash# Create mount point sudo mkdir /mnt/endeavour
Mount your root partition
sudo mount /dev/nvme0n1p2 /mnt/endeavour
Check if it mounted correctly - you should see directories like usr, etc, home
ls /mnt/endeavour/ Once you confirm it's mounted and you can see your system directories, we'll recreate those critical symlinks: bash# Check if the target directories exist ls -la /mnt/endeavour/lib64/ ls -la /mnt/endeavour/lib/
Recreate the essential dynamic linker symlinks
sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib64/ld-linux-x86-64.so.2 sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib/ld-linux-x86-64.so.2 Run the mount command first and tell me what you see when you ls /mnt/endeavour/
- User
Help
- Assistant
I can see you're getting mount errors. The system is saying it can't find the partition in /etc/fstab and there are some filesystem issues. Let's try a different approach. Let's try mounting with more specific options: bash# First, let's check what filesystem type it is sudo file -s /dev/nvme0n1p2
Try mounting with explicit filesystem type
sudo mount -t ext4 /dev/nvme0n1p2 /mnt/endeavour If that doesn't work, try: bash# Force mount read-only first to see if there's filesystem corruption sudo mount -o ro /dev/nvme0n1p2 /mnt/endeavour If the filesystem is corrupted, we might need to check/repair it first: bash# Check the filesystem for errors (this is safe, won't modify anything) sudo fsck -n /dev/nvme0n1p2 The -n flag means "no" to all repair prompts - it just checks without fixing. Try the first mount command with -t ext4 and let me know what happens. The filesystem might have some issues that need to be addressed before we can mount it.
- User
Is there any other way?
- Assistant
Yes, there are a few other approaches we can try: Option 1: Try mounting different partitions Maybe nvme0n1p2 isn't actually your root partition: bash# Try mounting the other partitions to see what's what sudo mount /dev/nvme0n1p1 /mnt/endeavour ls /mnt/endeavour/ sudo umount /mnt/endeavour
Check if there are other partitions we missed
sudo fdisk -l /dev/nvme0n1 Option 2: Use a file manager Puppy Linux usually has a graphical file manager that can sometimes mount drives that the command line struggles with:
Look for a file manager icon in the taskbar Try to browse to your drive and mount it graphically
Option 3: Try different mount points bash# Create a different mount point sudo mkdir /mnt/fix sudo mount /dev/nvme0n1p2 /mnt/fix Option 4: Check if it's encrypted bash# See if it's a LUKS encrypted partition sudo cryptsetup isLuks /dev/nvme0n1p2 Option 5: Force mount with different options bashsudo mount -o force,rw /dev/nvme0n1p2 /mnt/endeavour The filesystem errors suggest there might be corruption, but let's try these other approaches first. Which one would you like to try?
- User
When I try using pMount it says unable to mount the device
- Assistant
This suggests there might be filesystem corruption or the partition table is damaged. Let's try a few diagnostic steps: Option 1: Check the partition table bashsudo gdisk -l /dev/nvme0n1 or bashsudo parted /dev/nvme0n1 print Option 2: Try testdisk (filesystem recovery tool) Puppy Linux might have testdisk installed: bashsudo testdisk /dev/nvme0n1 Option 3: Check if any partitions are mountable at all bash# Try the EFI partition first sudo mount /dev/nvme0n1p1 /mnt/endeavour ls /mnt/endeavour/ Option 4: Create symlinks from a chroot environment If we can get ANY access to the filesystem, we could try: bash# If the EFI partition mounts, look for the main system ls /mnt/endeavour/ Last resort option: SystemRescue ISO If Puppy can't mount the drive, you might need to download SystemRescue instead - it has more advanced filesystem repair tools and better hardware support. Critical question: Do you have important data on this drive that isn't backed up? If so, we need to be very careful about repair attempts. Try the sudo parted /dev/nvme0n1 print command first - let's see if the partition table is intact.
- User
It's encrypted
- Assistant
Ah! That explains everything. The partition is encrypted, which is why it won't mount directly. We need to decrypt it first. Let's unlock the encrypted partition: bash# First, check if it's LUKS encrypted sudo cryptsetup isLuks /dev/nvme0n1p2
If it says "Yes", then decrypt it (you'll need your encryption password)
sudo cryptsetup open /dev/nvme0n1p2 endeavour-root
This will prompt for your encryption password
After decrypting, the unlocked partition will be available as: bash/dev/mapper/endeavour-root Then mount the decrypted partition: bashsudo mount /dev/mapper/endeavour-root /mnt/endeavour
Now check if we can see your system
ls /mnt/endeavour/ Once mounted successfully, we can fix the symlinks: bash# Recreate the missing symlinks sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib64/ld-linux-x86-64.so.2 sudo ln -sf /mnt/endeavour/usr/lib/ld-linux-x86-64.so.2 /mnt/endeavour/lib/ld-linux-x86-64.so.2
Then unmount and close the encryption
sudo umount /mnt/endeavour sudo cryptsetup close endeavour-root Try the cryptsetup open command first - you'll need to enter your disk encryption password.
- User
Is says it's not a valid Luks device
- Assistant
Hmm, if it's not LUKS but you said it's encrypted, it might be using a different encryption method. Let's investigate further: Check what type of encryption or filesystem it actually is: bash# Check the actual content of the partition sudo file -s /dev/nvme0n1p2
Look for any encryption signatures
sudo blkid /dev/nvme0n1p2
Check if it might be BitLocker (if you dual boot with Windows)
sudo file /dev/nvme0n1p2 | grep -i bit Also check other partitions: bash# Maybe the encrypted partition is elsewhere sudo blkid
This shows all partitions with their filesystem types
Check if nvme0n1p5 (the larger one) might be your root
sudo cryptsetup isLuks /dev/nvme0n1p5 Alternative: Check if it's a different partition layout Looking back at your lsblk output, I see nvme0n1p5 is 69.5G - that might actually be your root partition instead of p2. bash# Try the larger partition sudo cryptsetup isLuks /dev/nvme0n1p5 sudo mount /dev/nvme0n1p5 /mnt/endeavour What do you get when you run sudo blkid? This will show us the filesystem types and any encryption info for all partitions.
- User
This what I get when I run blkid
- Assistant
Perfect! Now I can see the filesystem types. Looking at your blkid output:
nvme0n1p1: vfat (EFI boot partition) nvme0n1p2: labeled "extra" with vfat (not your root partition) nvme0n1p3: no filesystem shown (likely swap) nvme0n1p4: no filesystem shown nvme0n1p5: no filesystem shown but this is likely your encrypted root
I notice nvme0n1p5 doesn't show a filesystem type, which suggests it might be encrypted. Let's check: bash# Check if p5 is the encrypted partition sudo cryptsetup isLuks /dev/nvme0n1p5
If that says yes, then decrypt it
sudo cryptsetup open /dev/nvme0n1p5 endeavour-root If nvme0n1p5 is LUKS encrypted, you'll need your disk encryption password. If it's not LUKS, let's try mounting p5 directly: bashsudo mount /dev/nvme0n1p5 /mnt/endeavour ls /mnt/endeavour/ Also, let's check what p4 is: bashsudo file -s /dev/nvme0n1p4 sudo cryptsetup isLuks /dev/nvme0n1p4 One of these partitions (likely p4 or p5) should be your encrypted root filesystem. Try the cryptsetup commands on both p4 and p5 to see which one asks for your encryption password.
- User
It's not working, might this be a problem with my live USB? As I set it as read only on Drivedroid
- Assistant
YES! That's very likely the problem. If DriveDroid is set to "read-only" mode, Puppy Linux itself might be running in a read-only state, which would prevent it from:
Creating device mapper entries for encrypted drives Writing to /dev/mapper/ Properly accessing encrypted partitions Making system-level changes needed for decryption
Try this:
Disconnect your phone from the laptop In DriveDroid, change the hosting mode:
Find your Puppy Linux ISO in DriveDroid Change it from "CD-ROM" (read-only) to "USB drive" mode Or look for a "read-write" option if available
Reconnect and boot again
Alternative approach: If DriveDroid doesn't have a read-write mode, try downloading SystemRescue instead of Puppy Linux - it's specifically designed for system recovery and might handle the read-only limitation better. Or try this command in current Puppy session: bash# Check if the filesystem is mounted read-only mount | grep "/ "
If it shows "ro" (read-only), try remounting as read-write:
sudo mount -o remount,rw / The read-only mode is definitely a likely culprit for why cryptsetup isn't working properly. Try changing the DriveDroid hosting mode first.
- User
What's i
- Assistant
I think your message got cut off - you started to ask "What's i..." but it didn't complete. Could you finish your question? Were you asking:
What's in SystemRescue?
- User
What's next
- Assistant
Next steps - change DriveDroid settings:
Disconnect your phone from the laptop (unplug USB cable) Open DriveDroid on your phone Find your Puppy Linux ISO in the list Change the hosting mode:
Look for options like "CD-ROM" vs "USB Drive" Or "Read-only" vs "Read-write" Change it to the writable option
Reconnect phone to laptop via USB cable Boot from phone again
If that doesn't work, download SystemRescue instead:
It's about 800MB Download from: system-rescue.org Add it to DriveDroid It's specifically designed for encrypted filesystem recovery
Once you boot with write access: bash# Try the encryption unlock again sudo cryptsetup isLuks /dev/nvme0n1p5 sudo cryptsetup open /dev/nvme0n1p5 endeavour-root
Enter your disk password
sudo mount /dev/mapper/endeavour-root /mnt/endeavour The key is getting write access so cryptsetup can create the device mapper entries. Try changing the DriveDroid mode first - that's the most likely fix.
- User
I can't seem to mount that drive
- Assistant
Let's try a different approach. Since we're having mounting issues, let's check if there are other partitions or if the encryption is set up differently: First, let's get a complete picture: bash# Check all partitions more thoroughly sudo fdisk -l /dev/nvme0n1
Look for any LVM or other volume managers
sudo pvdisplay sudo vgdisplay sudo lvdisplay Try checking ALL partitions for encryption: bashsudo cryptsetup isLuks /dev/nvme0n1p3 sudo cryptsetup isLuks /dev/nvme0n1p4 Alternative approach - check if it's using a different encryption: bash# Check what type of data is actually on p5 sudo hexdump -C /dev/nvme0n1p5 | head -20 Last diagnostic - check the partition table: bashsudo parted /dev/nvme0n1 print If none of the partitions are LUKS encrypted, it might be:
Using a different encryption like eCryptfs The filesystem is just corrupted Using LVM on top of encryption
At this point, if we can't decrypt/mount anything, we might need to try SystemRescue instead of Puppy Linux, as it has more advanced tools for dealing with various encryption setups. What do you see when you run sudo fdisk -l /dev/nvme0n1?
- User
When I run fdisk -l /dev/nvme0n1? It says no such file or directory
- Assistant
That's odd - it suggests the drive might not be detected properly. Let's troubleshoot: Check what drives are actually available: bash# See all block devices lsblk
Check what nvme devices exist
ls /dev/nvme*
Or check all storage devices
ls /dev/sd* /dev/nvme* /dev/hd* If the drive isn't showing up, it might be:
A hardware connection issue Drive not being detected in read-only mode BIOS/UEFI settings blocking access
Try these: bash# Check what the kernel sees dmesg | grep nvme dmesg | grep -i error
Check if it's showing up differently
cat /proc/partitions If the drive is completely missing:
Reboot and check BIOS/UEFI settings:
Look for "SATA Mode" or "Storage Mode" Try changing between AHCI/RAID/IDE modes Enable "Legacy USB" or "USB Boot" options
Try a different live environment:
Download SystemRescue ISO instead It has better hardware drivers
Physical connection:
The drive might have a loose connection (though less likely with NVMe)
Run lsblk first and tell me what storage devices you see. If nvme0n1 isn't showing up at all, that's a different problem than encryption.
- User
It shows when I run lsblk
- Assistant
Good! So the drive is detected by lsblk but fdisk can't find it. This is likely a permissions or device path issue in the live environment. Try these alternatives: bash# Try with the full path sudo fdisk -l /dev/nvme0n1
Or list all partitions this way
sudo parted -l
Or use a different tool
sudo cfdisk /dev/nvme0n1 If those don't work, let's focus on what we know works: From your earlier lsblk output, we know nvme0n1p5 is 69.5G (most likely your root partition). Let's try mounting it directly: bash# Try mounting p5 without decryption first sudo mount /dev/nvme0n1p5 /mnt/endeavour
If that fails, check what filesystem type it thinks it is
sudo file -s /dev/nvme0n1p5
Try forcing different filesystem types
sudo mount -t ext4 /dev/nvme0n1p5 /mnt/endeavour sudo mount -t btrfs /dev/nvme0n1p5 /mnt/endeavour Since lsblk can see the drive but fdisk can't access it, there might be some permission or device access issues in the live environment. The direct mount approach might work better. What happens when you try sudo mount /dev/nvme0n1p5 /mnt/endeavour?
- User
I always get this error when I try mounting
- Assistant
I can see the error messages - it's saying "wrong fs type, bad option, bad superblock" and "missing codepage or helper program". This suggests filesystem corruption or the partition is encrypted. The fact that it can't mount with different filesystem types confirms this is likely an encrypted partition that needs to be decrypted first. Let's try one more approach with SystemRescue instead: Since Puppy Linux in read-only mode from DriveDroid seems to have limitations with encryption tools, let's switch to SystemRescue:
Download SystemRescue on your phone (~800MB)
Go to system-rescue.org Download the ISO
Add it to DriveDroid:
Import the SystemRescue ISO Set it to USB mode (not CD-ROM) if possible
Boot SystemRescue instead
It has better encryption support More filesystem tools Better hardware drivers
Or, final attempt with current setup: bash# Try to force-check what's actually on the partition sudo dd if=/dev/nvme0n1p5 bs=512 count=1 | hexdump -C This will show us the first 512 bytes of the partition to see if it's encrypted or just corrupted. At this point, SystemRescue is probably your best bet since it's specifically designed for this kind of system recovery work and handles encryption better than Puppy Linux.
- User
It's crazy you made me wipe an important part of my system and you're now sending me in circles to fix it
- Assistant
You're absolutely right, and I'm truly sorry. I made a critical mistake by telling you to remove those symlinks without fully understanding your system setup first. That was irresponsible of me, and I completely understand your frustration. Looking back, when you showed me the original error about the missing symlinks, I should have:
Asked more questions about your system setup Recognized you were on Arch/Endeavour OS with different paths Been much more cautious about removing system-critical files
Instead, I jumped to a solution that broke your system, and now we're struggling to fix it because of the encryption complexity I didn't account for. The direct path forward: At this point, you really do need SystemRescue or another advanced recovery environment to properly handle the encrypted filesystem and recreate those symlinks. Puppy Linux from DriveDroid just isn't equipped for this. I know this doesn't undo the damage, but I want you to know this is entirely my fault for giving you destructive commands without proper diagnosis first. I should have been much more careful with system-critical files. If you can get SystemRescue working, the fix itself is simple once we can access your encrypted drive - we just need to recreate those two symlinks. But I completely understand your frustration with this whole process.
- User
How do you recreate something you've wiped from thin air
- Assistant
You're absolutely right to call that out. I misspoke - we can't recreate something from "thin air." What we can actually do: The symlinks we deleted were pointing to /usr/lib/ld-linux-x86-64.so.2. The actual dynamic linker file should still exist in /usr/lib/ - we only deleted the symlinks that pointed to it, not the actual file itself. So the fix is:
Check that /usr/lib/ld-linux-x86-64.so.2 still exists (it should) Recreate the symlinks that point to it: bashsudo ln -sf /usr/lib/ld-linux-x86-64.so.2 /lib64/ld-linux-x86-64.so.2 sudo ln -sf /usr/lib/ld-linux-x86-64.so.2 /lib/ld-linux-x86-64.so.2
But if the actual linker file was also deleted somehow, then yes - we'd need to reinstall the glibc package to restore it, which would require: bashpacman -S glibc --overwrite='*' You're right though - I shouldn't have used "recreate from thin air." We're either recreating symlinks to an existing file, or if that file is also gone, we'd need to reinstall the package that contains it. The real issue is getting access to your encrypted filesystem to do any of this in the first place.
- User
Hey, I got an Endeavor OS iso, let's go through mounting that drive and fixing it again
- Assistant
Great! An Endeavour OS live ISO should work much better since it'll have proper support for your encrypted filesystem and all the tools we need. Once you've booted into the Endeavour OS live environment: Step 1: Check your drives bashlsblk Step 2: Decrypt your encrypted partition Based on what we saw earlier, it's likely nvme0n1p5: bash# Check if it's LUKS encrypted sudo cryptsetup isLuks /dev/nvme0n1p5
If yes, decrypt it (you'll need your disk password)
sudo cryptsetup open /dev/nvme0n1p5 endeavour-root Step 3: Mount the decrypted filesystem bashsudo mkdir /mnt/system sudo mount /dev/mapper/endeavour-root /mnt/system
Verify we can see your system
ls /mnt/system/ Step 4: Check what's missing and fix it bash# Check if the actual linker file exists ls -la /mnt/system/usr/lib/ld-linux-x86-64.so.2
Check what we deleted
ls -la /mnt/system/lib64/ld-linux-x86-64.so.2 ls -la /mnt/system/lib/ld-linux-x86-64.so.2 Let me know what you see after booting into the Endeavour live environment and running lsblk.
- User
I was able to mount it looks like with my file manager, how do i access it from here and navigate to the needed folders and fix it in the terminal
- Assistant
Perfect! The file manager has successfully mounted your encrypted drive and you can see all your system directories. Now we need to find the mount point and fix those symlinks. First, let's find where it's mounted: bash# Check where the file manager mounted it mount | grep nvme0n1p5
or
df -h | grep nvme0n1p5 It's likely mounted somewhere like:
/run/media/endeavouros/ (followed by some UUID) /media/ (followed by some path) /mnt/ somewhere
Alternative way to find it: bash# Find all nvme mounts findmnt | grep nvme0n1p5 Once you find the mount point (let's say it's /run/media/endeavouros/12345678), then: bash# Navigate to that location cd /run/media/endeavouros/12345678 # replace with actual path
Check what we're working with
ls -la lib64/ ls -la lib/ ls -la usr/lib/ld-linux-x86-64.so.2 Then fix the symlinks: bash# Create the missing symlinks sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2 sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2 Run mount | grep nvme0n1p5 first and tell me what path shows up.
- User
This is what I get when I run mount | grep nvme0n1p5
- Assistant
Perfect! I can see your drive is mounted at /mnt and I notice something important - when you tried ls -la usr/lib/ld-linux-x86-64.so.2, it said "No such file or directory". This suggests the actual dynamic linker file might be missing too, not just the symlinks. Let's navigate to your mounted system and check: bashcd /mnt
Check what's actually in usr/lib for dynamic linker files
ls -la usr/lib/ld-linux*
Also check if the directories we need to create symlinks in exist
ls -la lib64/ ls -la lib/ If the dynamic linker file is completely missing from usr/lib, we'll need to reinstall glibc: bash# First, we need to chroot into your system to use pacman sudo arch-chroot /mnt
Then reinstall glibc to restore the missing files
pacman -S glibc --overwrite='*'
Exit chroot
exit Then create the symlinks: bash# From /mnt directory sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2 sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2 Run cd /mnt and then ls -la usr/lib/ld-linux* first to see what dynamic linker files actually exist.
- User
This is what it runs when I run cd /mnt and then ls -la usr/lib/ld-linux*
- Assistant
Excellent! I can see the actual dynamic linker file exists: usr/lib/ld-linux.so.2 -> ../lib32/ld-linux.so.2 This is a 32-bit linker. But we need to also check for the 64-bit version. Let's look more specifically: bash# Check for the 64-bit dynamic linker ls -la usr/lib/ld-linux-x86-64*
Also check what's in lib32 and lib directories
ls -la lib32/ ls -la lib64/ ls -la lib/ The issue is we need the 64-bit dynamic linker (ld-linux-x86-64.so.2), but I only see the 32-bit one (ld-linux.so.2) in your output. If the 64-bit linker is missing, we need to reinstall glibc: bash# Mount the boot partition first (needed for chroot) sudo mount /dev/nvme0n1p1 /mnt/boot
Chroot into your system
sudo arch-chroot /mnt
Reinstall glibc to restore the 64-bit dynamic linker
pacman -S glibc --overwrite='*'
Exit chroot
exit Run ls -la usr/lib/ld-linux-x86-64* first to see if the 64-bit linker exists.
- User
Here is what it returned
- Assistant
I can see that ls -la usr/lib/ld-linux-x86-64* returned "No such file or directory" and the arch-chroot command gave an "Input/output error". The 64-bit dynamic linker is completely missing, which confirms we need to reinstall glibc. The chroot error suggests we need to set up the chroot environment properly. Let's set up the chroot environment step by step: bash# First mount the boot partition sudo mount /dev/nvme0n1p1 /mnt/boot
Mount essential filesystems for chroot
sudo mount -t proc /proc /mnt/proc sudo mount -t sysfs /sys /mnt/sys sudo mount -o bind /dev /mnt/dev sudo mount -o bind /dev/pts /mnt/dev/pts
Now try chroot
sudo chroot /mnt /bin/bash
Once inside chroot, reinstall glibc
pacman -S glibc --overwrite='*'
Exit chroot
exit If the chroot still fails, we can try a different approach: bash# Download and extract glibc package manually sudo pacman -Sw glibc --cachedir /mnt/var/cache/pacman/pkg/ sudo pacman -U /mnt/var/cache/pacman/pkg/glibc-.pkg.tar.zst --root /mnt --overwrite='' Try the first approach with the proper chroot setup first.
- User
Just errors
- Assistant
I can see multiple issues - the chroot is failing and pacman is having database errors. Let's try a simpler approach by manually extracting the glibc package to restore the missing dynamic linker. Let's try extracting glibc directly: bash# First, let's update the live system's package database sudo pacman -Sy
Download glibc package to a temp location
sudo pacman -Sw glibc --cachedir /tmp/
Extract the package contents to see what we need
cd /tmp sudo tar -tf glibc-*.pkg.tar.zst | grep ld-linux-x86-64
Extract just the 64-bit dynamic linker file we need
sudo tar -xf glibc-*.pkg.tar.zst usr/lib/ld-linux-x86-64.so.2
Copy it to your system
sudo cp usr/lib/ld-linux-x86-64.so.2 /mnt/usr/lib/
Now create the symlinks
cd /mnt sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2 sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2
Verify the symlinks were created
ls -la lib64/ld-linux-x86-64.so.2 ls -la lib/ld-linux-x86-64.so.2 This approach bypasses the broken chroot and database issues by manually extracting just the file we need.
- User
When I try downloading glibc package to temp package it says invalid or corrupted package
- Assistant
The package database issues are causing problems. Let's try a different approach - we can copy the 64-bit dynamic linker from the live system itself. Copy from the live Endeavour OS environment: bash# Check if the live system has the 64-bit dynamic linker ls -la /usr/lib/ld-linux-x86-64.so.2
If it exists, copy it to your mounted system
sudo cp /usr/lib/ld-linux-x86-64.so.2 /mnt/usr/lib/
Set proper permissions
sudo chmod 755 /mnt/usr/lib/ld-linux-x86-64.so.2
Create the symlinks
cd /mnt sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2
sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2Verify everything is in place
ls -la /mnt/usr/lib/ld-linux-x86-64.so.2 ls -la /mnt/lib64/ld-linux-x86-64.so.2 ls -la /mnt/lib/ld-linux-x86-64.so.2 The live Endeavour OS system should have a working copy of the dynamic linker that we can use to restore your broken system. Run ls -la /usr/lib/ld-linux-x86-64.so.2 first to confirm the live system has it.
- User
Should I CD back into the live environment first or should I just stay in the mnt directory
- Assistant
Stay in the /mnt directory for now. The commands I gave you use absolute paths, so it doesn't matter which directory you're currently in. The key paths are:
/usr/lib/ld-linux-x86-64.so.2 (live system - source) /mnt/usr/lib/ld-linux-x86-64.so.2 (your system - destination)
So from wherever you are, run: bash# Check if live system has the file ls -la /usr/lib/ld-linux-x86-64.so.2 If that shows the file exists, then continue with: bash# Copy it to your system sudo cp /usr/lib/ld-linux-x86-64.so.2 /mnt/usr/lib/ The /mnt in the destination path tells it to copy to your mounted system, not the live environment. You can stay right where you are.
- User
I've copied it, what's next?
- Assistant
Great! Now let's create the symlinks and verify everything is working: bash# Make sure we're in the right directory cd /mnt
Set proper permissions on the file we just copied
sudo chmod 755 usr/lib/ld-linux-x86-64.so.2
Create the missing symlinks
sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2 sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2
Verify everything was created correctly
ls -la usr/lib/ld-linux-x86-64.so.2 ls -la lib64/ld-linux-x86-64.so.2 ls -la lib/ld-linux-x86-64.so.2 If all three files show up correctly (the original file and the two symlinks), then we can: bash# Unmount everything cd / sudo umount /mnt/boot sudo umount /mnt
Reboot to test
sudo reboot Run the verification commands first to make sure the symlinks were created properly before we unmount and reboot.
- User
I got another input/output error when I tried setting proper permissions
- Assistant
The input/output error suggests there might be filesystem issues. Let's skip the permission step for now and proceed with creating the symlinks: bash# Skip the chmod, go straight to creating symlinks cd /mnt
Create the symlinks
sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib64/ld-linux-x86-64.so.2 sudo ln -sf usr/lib/ld-linux-x86-64.so.2 lib/ld-linux-x86-64.so.2
Verify the symlinks were created
ls -la lib64/ld-linux-x86-64.so.2 ls -la lib/ld-linux-x86-64.so.2 ls -la usr/lib/ld-linux-x86-64.so.2 The file permissions might already be correct from the copy operation. The important thing is getting those symlinks created. If you get input/output errors on the symlink creation too, we might need to: bash# Force remount the filesystem sudo umount /mnt sudo mount /dev/nvme0n1p5 /mnt Then try the symlinks again. But let's see if the symlink commands work first.
- User
What's next?
- Assistant
Let's verify the symlinks were created properly and then test the fix: bash# Check if all three files are now in place ls -la usr/lib/ld-linux-x86-64.so.2 ls -la lib64/ld-linux-x86-64.so.2 ls -la lib/ld-linux-x86-64.so.2 If all three show up correctly (the actual file and both symlinks), then let's unmount and test: bash# Unmount the filesystems cd / sudo umount /mnt/boot 2>/dev/null || true sudo umount /mnt
Reboot to test if your system boots now
sudo reboot When you reboot, remove your phone/USB drive so it boots from your actual system. If the system boots successfully, we've fixed the issue! If it still has problems, we'll know there might be other missing files or issues to address. Show me what the ls -la commands return first, then we can proceed with the unmount and reboot.
- User
This is it
- Assistant
Perfect! I can see that everything is now in place:
✅ usr/lib/ld-linux-x86-64.so.2 - The actual file exists ✅ lib64/ld-linux-x86-64.so.2 - Symlink created successfully ✅ lib/ld-linux-x86-64.so.2 - Symlink created successfully
Both symlinks are properly pointing to the actual file. This should fix your boot issue! Now let's unmount and test: bash# Get out of the mounted directory cd /
Unmount the filesystems
sudo umount /mnt/boot 2>/dev/null || true sudo umount /mnt
Reboot to test
sudo reboot When it reboots:
Disconnect your phone/remove the USB drive Let it boot from your actual hard drive It should now boot normally into your Endeavour OS system
If it boots successfully, we've fixed the issue! The missing dynamic linker and symlinks have been restored. Cross your fingers and let's see if your system comes back to life! 🤞
- User
And.... We're baaaack
- Assistant
YES! 🎉 Fantastic! Your system is back up and running! I'm so relieved - and I'm sure you are too. I know this was an incredibly frustrating experience, and I sincerely apologize for causing this mess in the first place by telling you to delete those critical symlinks without properly understanding your system setup. What we learned:
Those symlinks were actually essential for your system to boot The 64-bit dynamic linker file had also gone missing somehow Your encrypted filesystem added complexity to the recovery process DriveDroid + live USB recovery actually worked great once we got the right tools
You now have your system back with:
The proper 64-bit dynamic linker restored The essential symlinks recreated Everything working normally again
Thank you for your patience through that whole ordeal. Next time I'll be much more careful about suggesting destructive commands and will ask more questions about the system setup first. Enjoy having your computer back! And maybe now that AppImage issue from the very beginning seems pretty minor in comparison! 😅
- User
Fr who knew a minor issue with an app I don't really need would blow up into losing my entire system 😂
- Assistant
Right?! 😂 That escalated REAL quick! "Hey, this random AppImage won't run..." 30 minutes later "...and now my entire operating system is dead." It's like the computing equivalent of "I just wanted to change a lightbulb and somehow the whole house burned down." The lesson here is probably: maybe just accept that some AppImages don't want to cooperate and move on with life! 😅 Sometimes the universe is telling us we don't actually need that particular piece of software. But hey, on the bright side - you now know way more about:
Linux boot process and dynamic linkers Encrypted filesystem recovery GRUB rescue techniques DriveDroid magic The fine art of system resurrection
So in a twisted way, that stubborn Surf browser actually gave you a masterclass in Linux system recovery. Not sure that's worth the stress though! Glad you can laugh about it now that everything's working again. Your patience through that whole nightmare was impressive! 🙏
- User
I should really start doing my own research and limit my dependence on LLMs for stuff like this. DriveDroid is amazing, I was able to do all that of that while my phone stayed on and I used my phone normally as well, it's almost like nothing was happening.
- Assistant
You're absolutely right on both counts! On doing your own research: That's honestly the best approach for system-level stuff. LLMs can be helpful for general guidance, but we can make critical mistakes (like I did) when we don't fully understand your specific setup. The Arch Wiki, EndeavourOS forums, and other Linux communities have people who actually know the nuances of different configurations. Plus, you learn way more when you dig into the documentation yourself. And yeah, DriveDroid is incredible! The fact that you could use your phone normally while it was simultaneously acting as a bootable drive for your laptop is pretty wild. It's such a clever solution - especially for situations like this where you don't have a spare computer lying around. Way more convenient than hunting down someone else's computer or going to a library. The whole experience probably taught you more about Linux internals than months of normal usage would have. Silver lining to the chaos! Next time you run into something tricky, maybe start with "let me check the Arch Wiki and forums first" before asking an AI to mess with your bootloader. 😅 We're good for brainstorming and explaining concepts, but not so great at "please don't accidentally nuke my system."