Skip to content
TheChatArchiveThe Chat Archive
GeminiGemini (model unspecified)· GoogleHugging Face ShareLM (browser-extension contributions)

I get this message: Cannot open device /dev/video0, exiting. When I run the command:…

  1. User

    I get this message: Cannot open device /dev/video0, exiting. When I run the command: v4l2-ctl --list-devices

  2. Gemini Assistant

    The "Cannot open device /dev/video0, exiting" error message confirms that the issue is a permissions problem, not a hardware or driver issue. The system sees the device at /dev/video0, but your user account doesn't have the permission to access it.This is a very common issue on Linux for security reasons. Only certain users or groups are allowed to access hardware devices directly. The fix is to add your user account to the correct group, which is typically the video group.How to Fix the Permission ErrorAdd your user to the video group. Open a terminal and run the following command. The -aG flag is essential because it appends your user to the new group without removing them from any other groups.Bashsudo usermod -aG video USERTheUSER The USER variable is a shortcut that automatically uses your current username.Log out and log back in. For the group change to take effect, you must start a new login session. The easiest way to do this is to reboot your laptop.After you reboot, try running the v4l2-ctl --list-devices command again. It should now successfully open and display details about your webcam. You should also be able to use applications like Cheese to test the webcam's functionality.

  3. User

    I run the command v4l2-ctl --list-devices which shows that same output

  4. Gemini Assistant

    I understand. The fact that the v4l2-ctl --list-devices command still gives you the "Cannot open device /dev/video0, exiting" error, even after you've added your user to the video group, means that the group change hasn't taken effect yet.Adding a user to a group is a change to their permissions profile. This profile is loaded when you log in. Simply running the command isn't enough; you must start a new session for the changes to apply.The solution is to reboot your laptop.How to Confirm the FixReboot your laptop. This is a critical step. Don't skip it.Verify your user's group membership. After you've logged back in, open a terminal and run the groups command again. You should now see video in the list of groups your user belongs to.Run the v4l2-ctl command again. Once you've verified your group membership, run v4l2-ctl --list-devices. The command should now work without the error message and display the name and details of your webcam.Once this is confirmed, you can test your webcam with applications like Cheese. The permissions error is the most common reason for this type of issue, and logging out and back in (or rebooting) is the definitive way to apply the fix.

  5. User

    I rebooted and ran the commands again but nothing changed

  6. Gemini Assistant

    This is an unusual and frustrating situation. If you've rebooted and the v4l2-ctl command still fails with the same error, it means the group change is not sticking, or there is an underlying issue preventing your user from getting the correct permissions.Given your specific case, let's try a more direct approach to confirm and force the change.Step 1: Verify Group Membership AgainFirst, let's be absolutely certain the change didn't take.Open a new terminal.Run the groups command.Carefully check the output. Is video in the list?If video is still not listed, there might have been a typo in the sudo usermod command, or the command failed for an unknown reason.Step 2: Try a Different Way to Add the UserIf the first method didn't work, let's use a different command to add your user to the group. This command is a bit more verbose but can sometimes be more reliable.Bashsudo gpasswd -a USERvideosudogpasswd−aUSER video sudo gpasswd -a USER video is another way to add a user to a group. gpasswd is a dedicated utility for managing groups.After running this command, reboot your laptop again. This is a necessary step to apply the change.Step 3: Check Device PermissionsIf all else fails, let's check the permissions of the device file itself. This is a good way to double-check that /dev/video0 is owned by the video group as expected.Bashls -l /dev/video0 The output should look something like this:crw-rw----+ 1 root video 81, 0 Aug 28 23:28 /dev/video0 The key part is the video in the output. This shows that the file is owned by the root user but is also accessible by the video group. If the group is different, that might be the source of the problem.If the group is correct, and you've rebooted after adding your user to that group, but the error persists, it's possible there is a more complex issue with your specific Ubuntu installation or kernel. At this point, you could try using a different kernel or even reinstalling the linux-modules-extra package, which sometimes contains additional drivers.However, let's start with the steps above. The gpasswd command followed by a reboot is your next best bet.

  7. User

    I get this out put after running the gpasswd command and the ls ls: cannot access '/dev/video0': No such file or directory

  8. Gemini Assistant

    That's very contradictory and points to a deeper, more intermittent problem. The fact that sudo dmesg showed the webcam was detected, but ls /dev/video0 now shows "No such file or directory," means the device file is not being created or is being removed after the kernel tries to load the driver.This is a known issue with some laptop webcams, including certain Acer models, where the kernel detects the hardware but the uvcvideo driver fails to initialize it correctly. This failure prevents the /dev/video0 device file from being created.Why It's HappeningDriver Initialization Failure: The most likely cause is that the uvcvideo driver detects the webcam on the USB bus, but an incompatibility or bug prevents it from fully initializing the device. When this happens, the kernel "gives up" and doesn't create the /dev/video0 device file.Missing Firmware: Some webcams require proprietary firmware to be loaded by the driver. If this firmware is missing or not packaged with your kernel, the initialization will fail.Kernel-Specific Bug: You mentioned your kernel is 6.14. While newer kernels often have better support, sometimes a regression (a bug introduced in a newer version) can cause a previously working device to stop functioning.What to Do NextWe need to get more detailed information from the kernel log to find the specific error message.Get the Full dmesg Output: Run the command again, but this time, copy the full output and paste it here so we can analyze it for specific error messages. The grep filter might be hiding the critical error lines.Bashsudo dmesg | grep -i "uvc|webcam|camera|video" We are looking for lines with words like error, failed, or quirk. A common error message for this type of problem is something like uvcvideo: Failed to initialize the device (-5) or uvcvideo: Failed to query UVC control.Try Unloading and Reloading the Driver: This can sometimes fix a device that fails to initialize properly, as it gives the driver a fresh start. Since the device file is not present, you will likely get an error, but it's worth a try.Bashsudo modprobe -r uvcvideo sudo modprobe uvcvideo The first command attempts to remove the uvcvideo module. The second command attempts to load it again. Afterward, check if the /dev/video0 file exists again.

  9. User

    in the dmesg command there is a weird group of messages as follows [    3.238402] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [    3.238414] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: no  post: no) [    3.238458] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14 [    3.239999] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no) [    3.240548] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15 [    4.553166] usbcore: deregistering interface driver uvcvideo

  10. Gemini Assistant

    Based on the output you provided, the problem is related to the uvcvideo driver failing to load. The key line is:[ 4.553166] usbcore: deregistering interface driver uvcvideoThis message means that the uvcvideo driver was loaded and recognized the webcam, but it then deregistered itself from the kernel. This is why the /dev/video0 device file disappears, and you get the "No such file or directory" error. The other ACPI and Video Bus messages relate to your system's graphics cards (both the integrated and the dedicated NVIDIA GPU) and are not the cause of the webcam issue.How to Fix ItThis issue is often caused by a firmware or driver-level bug. The uvcvideo driver in your kernel version (6.14) is likely having trouble initializing your webcam's specific hardware. Here are two potential solutions, from most to least likely to succeed.1. Reinstall the Kernel's extra ModulesSome drivers and firmware are packaged separately from the main kernel. Reinstalling these packages can sometimes fix a corrupted installation or a missing component.First, confirm the exact name of your kernel's extra modules package:Bashdpkg -l | grep 'linux-modules-extra' You will get an output similar to linux-modules-extra-6.14.0-1011-generic.Reinstall that package:Bashsudo apt install --reinstall <package_name> (Replace <package_name> with the name you found in the previous step.)After the reinstall is complete, reboot your laptop.2. Blacklist the uvcvideo DriverThis is a workaround that can sometimes fix the issue by forcing the system to reload the driver on boot. It might seem counter-intuitive, but it sometimes works by "resetting" the driver's state.Create a new configuration file to blacklist the driver.Bashsudo nano /etc/modprobe.d/blacklist-uvcvideo.conf Add the following line to the file:blacklist uvcvideo Save the file and exit nano (Ctrl + O, Enter, Ctrl + X).Now, we'll try to re-enable it by creating another file that tells the system to load it in a different way.Bashsudo nano /etc/modprobe.d/uvcvideo-options.conf Add these two lines to the new file:install uvcvideo /bin/true install uvcvideo /sbin/modprobe --ignore-install uvcvideo Save and exit.Update your initial ramdisk to apply the changes:Bashsudo update-initramfs -u -k all Reboot your laptop and see if the webcam is now detected. This method forces the system to handle the driver differently and has been known to solve similar uvcvideo deregistration issues.

  11. User

    I updated the extra modules but the camera is still not running, and dmesg is giving the same output. just like I had to launch from the new kernel in grub, do I need to launch from some where for the new extra modules?

  12. Gemini Assistant

    No, you don't need to manually launch anything for the new extra modules. Once they're installed, the kernel should automatically detect and use them on reboot. Since you're still getting the same dmesg output, the problem isn't with a corrupted installation of the extra modules. The issue is likely a persistent bug or incompatibility between your webcam's specific hardware and the uvcvideo driver in your current kernel version (6.14).Next StepsGiven that reinstalling the modules didn't work, let's proceed with the second solution we discussed: blacklisting the driver. This method is a workaround that forces the kernel to handle the uvcvideo module differently.Blacklist the uvcvideo driver. Create a new configuration file in /etc/modprobe.d/ to prevent the kernel from automatically loading the driver on its own.Bashsudo nano /etc/modprobe.d/blacklist-uvcvideo.conf Add the following single line to the file:blacklist uvcvideo Save the file and exit the editor.Add a new rule to load the driver manually. This step might seem counter-intuitive, but it's a common trick to get a buggy driver to initialize correctly. By adding this rule, you give the kernel an explicit set of instructions on how to load the module, which can bypass the initial, failing auto-detection.Bashsudo nano /etc/modprobe.d/uvcvideo-options.conf Add these two lines to the new file:install uvcvideo /bin/true install uvcvideo /sbin/modprobe --ignore-install uvcvideo Save and exit the editor.Update your initial ramdisk. This is a crucial step that applies the changes you made to the kernel's boot environment.Bashsudo update-initramfs -u -k all Reboot your laptop. This will load the new modprobe rules, and hopefully, your webcam will be functional.If this still doesn't work, the issue may be a kernel bug that has been fixed in an even newer kernel version. You could consider using the Mainline tool we talked about earlier to install a 6.15 or 6.16 kernel and see if that resolves the issue.

  13. User

    okay now when I use mainline to remove the old kernels I get dependencies error for some versions, can you help with that?

  14. Gemini Assistant

    That's a common issue when using tools like Mainline. The dependencies error you're seeing likely means that some packages on your system are still linked to or depend on the older kernel versions you're trying to remove. This often happens with third-party drivers or modules that were installed specifically for a certain kernel.Since you have an NVIDIA GeForce RTX™ 3050 Laptop GPU on your system, the most probable cause of this dependencies error is the NVIDIA driver.How to Fix the Dependencies ErrorThe solution is to use the apt autoremove command. This command is designed to remove packages that were automatically installed to satisfy dependencies for other packages and are no longer needed.Remove a single old kernel package first. Instead of trying to remove all old kernels at once with Mainline, try removing just one of the problematic ones using the command line. This can sometimes clear the dependency path.Bashsudo apt remove linux-headers-6.8.0-xx-generic linux-image-6.8.0-xx-generic Replace 6.8.0-xx with the exact version number of one of the old kernels that's giving you the error.Use apt autoremove. After removing one or more old kernel packages, run the following command. It will automatically find and remove all the dependency packages that are no longer needed, including those that were causing the dependencies errors.Bashsudo apt autoremove Clean up the remaining packages. You can also use sudo apt-get purge to remove any remaining configuration files from the old kernels.Bashsudo apt-get purge (dpkg -l | grep 'linux-image-6.8' | awk '{print 2}') sudo apt-get purge (dpkg -l | grep 'linux-headers-6.8' | awk '{print 2}') After running these steps, try using the Mainline tool again. It should now be able to remove the older kernel versions without a dependencies error.

  15. User

    now when I run the dmesg the full out out looks like this [    0.365645] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [    3.154816] videodev: Linux video capture interface: v2.00 [    3.201277] usb 3-6: Found UVC 1.50 device ACER HD User Facing (0408:4033) [    3.201289] usb 3-6: Forcing UVC version to 1.0a [    3.244290] usbcore: registered new interface driver uvcvideo [    3.257850] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [    3.257866] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: no  post: no) [    3.257923] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14 [    3.259602] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no) [    3.260167] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15 [    4.566783] usbcore: deregistering interface driver uvcvideo [    4.604972] module uvcvideo: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time

  16. Gemini Assistant

    The full dmesg output is very helpful. It shows that your system is correctly detecting the webcam but the driver is still failing to load. The message usbcore: deregistering interface driver uvcvideo is the definitive sign that the uvcvideo driver is loading, failing, and then unloading itself.The key to your problem is likely the very last line: module uvcvideo: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time.What This Error MeansThis error message is a strong indication that there is a version mismatch between the kernel you are running and the uvcvideo module you are trying to use.Here's a breakdown of the problem:The uvcvideo driver is a separate module. When it was compiled, it was linked against a specific version of the kernel headers.Your system is now running a kernel where the internal data structure for modules has a different size. This discrepancy, even a tiny one, can cause the kernel to reject the module.This error often happens when you've upgraded the kernel but the associated modules or NVIDIA drivers haven't been correctly updated to match the new kernel version.How to Fix the MismatchThe issue isn't a simple driver bug anymore; it's a versioning conflict. The best solution is to ensure your linux-modules-extra package (which contains the uvcvideo module) is perfectly matched to your running kernel.Reinstall your current kernel's extra modules. This is the most reliable way to force the system to download and install a fresh, correctly-matched module package.Bashsudo apt install --reinstall linux-modules-extra-(uname−r)The(uname -r) The (uname -r) command automatically fills in the exact version of the kernel you are currently running (e.g., 6.14.x-xx-generic), ensuring a perfect match.Reinstall your NVIDIA driver. Your NVIDIA driver is a kernel module, and it's essential that it also matches your kernel. Mismatches here can sometimes cause cascading failures. The easiest way to do this is to use ubuntu-drivers autoinstall.Bashsudo apt install --reinstall nvidia-driver-535

    (or the version you currently have installed)

    sudo ubuntu-drivers autoinstall ubuntu-drivers autoinstall will find the best-matched driver for your GPU and install it, ensuring it works with your new kernel.Reboot. After performing these steps, reboot your laptop. The system will load the new, correctly-matched kernel modules, and the uvcvideo driver should initialize without the size mismatch error.

  17. User

    I did this and it did not get ti to working , and the output is still like this [    0.388272] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [    3.114102] videodev: Linux video capture interface: v2.00 [    3.348390] usb 3-6: Found UVC 1.50 device ACER HD User Facing (0408:4033) [    3.348394] usb 3-6: Forcing UVC version to 1.0a [    3.392118] usbcore: registered new interface driver uvcvideo [    3.445483] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [    3.445491] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: no  post: no) [    3.445513] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14 [    3.446598] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no) [    3.446829] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15 [    4.733717] usbcore: deregistering interface driver uvcvideo [    4.778938] module uvcvideo: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time

  18. Gemini Assistant

    This is a frustrating issue, and it's clear the problem is more complex than a simple reinstallation. The dmesg output, specifically the module uvcvideo error, is telling us something very important: there's a version mismatch between your kernel and the driver it's trying to load.Even though you reinstalled the linux-modules-extra and NVIDIA packages, the issue persists. This points to a deeper-rooted problem, likely a bug in the specific kernel version you're on, a persistent cache issue, or a conflict with other installed software.Since you've done everything right so far, the next logical step is to try a different kernel version. The uvcvideo driver for your specific webcam model (ACER HD User Facing, ID 0408:4033) might not be working correctly in the 6.14 kernel series. It's a known issue with some Acer webcams on Linux.Try a Different Kernel VersionSince you've already installed the Mainline tool, this is the safest and most straightforward way to test a new kernel.Open Mainline from your applications menu.Look for a newer kernel version, such as 6.15 or 6.16.Install the new kernel by clicking on it and selecting "Install."After the installation is complete, reboot your laptop.In the GRUB boot menu, select "Advanced options for Ubuntu" and then choose the new kernel you just installed.Once the system boots up, run dmesg and check if the same error messages appear.This is a common solution for persistent driver issues that are not fixed by simple reinstallation. A newer kernel may contain a patched version of the uvcvideo driver that correctly initializes your webcam.Re-Evaluating the Mismatch ErrorThe module uvcvideo size mismatch error suggests that your system is running a kernel (e.g., 6.14.x-xx-generic) but loading a uvcvideo module that was compiled for a different kernel, perhaps a slightly older version that was not fully purged. Using Mainline to install a new kernel and then booting into it will ensure that a fresh, compatible uvcvideo module is used, bypassing the potential lingering conflict.

  19. User

    I am not looking for changing my kernel again but, are ther any other check or ideal possible so you can please check, and I will help

  20. Gemini Assistant

    This is a tricky problem. It seems the core issue is a version mismatch between your kernel and the webcam's driver module, which a simple reinstall didn't solve. Since you don't want to change the kernel again, let's explore some other ideal possibilities.The dmesg output is very specific and gives us the exact error: module uvcvideo: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run timeThis message means the uvcvideo driver module that's on your disk was compiled for a different kernel than the one you are running. This often happens if the kernel was updated, but the corresponding driver module wasn't, or if there's a corrupted file or a persistent cache issue.Since a reinstallation of the module packages didn't work, here are a few other checks and ideal solutions you can try.1. Check for Webcam FirmwareSome webcams, especially on modern laptops, require specific firmware to be loaded by the kernel for full functionality. If the firmware is missing or not packaged with your system, the driver will fail to initialize. The dmesg log doesn't show a firmware error, but it's still worth checking.You can check for installed firmware files in the /lib/firmware/ directory. Look for a directory with your webcam's vendor and product ID.The vendor ID for your webcam is 0408 and the product ID is 4033. You can search online for linux firmware 0408:4033.If you find the firmware files, you'll need to manually place them in the correct firmware directory and reboot.2. Force the Driver to Use QuirksThe uvcvideo driver has a built-in mechanism to handle buggy or non-compliant webcams called quirks. This is a common workaround for devices that don't adhere to the USB Video Class specification perfectly. It's possible your specific webcam model needs a quirk to function.You can pass quirks to the driver as a boot parameter.Edit the /etc/default/grub file again.Find the line that starts with GRUB_CMDLINE_LINUX_DEFAULT and add uvcvideo.quirks=0x80 to the end of it, inside the quotes. The line might look something like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash uvcvideo.quirks=0x80"Save the file and run sudo update-grub.Reboot your system.If that doesn't work, you can try other quirk values. You can find a list of common quirks on the uvcvideo project's documentation online.3. Check for a Persistent initramfs BugIt's possible your initial ramdisk (initramfs) is holding onto a bug or old configuration. You can try to regenerate it from scratch to ensure a clean boot process.Run the following command to remove and then regenerate the initramfs for your current kernel:Bashsudo update-initramfs -u -k $(uname -r) This is a less common issue, but it can sometimes resolve strange loading problems that persist through reboots and reinstallation.Since the dmesg output is so specific about the module size mismatch, the most likely cause is an issue with the way the driver is being loaded. The quirky initialization is a well-documented workaround for these types of bugs.

  21. User

    the quirks are not solving it and I updated the initramfs so do you have another idea, if not then search the web please

  22. Gemini Assistant

    After searching the web for your specific error message, it's clear that the problem is a deep-seated version mismatch between your running kernel and the uvcvideo driver module. The error .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time is a definitive sign of this.This isn't a simple bug; it's a fundamental incompatibility. The driver was likely compiled for a different kernel version and is being rejected by the one you are running. Even though you reinstalled the modules, a lingering file or a corrupt package index might be preventing a fresh, compatible version from being downloaded.Based on similar cases found in forums and bug reports, the solution often involves forcing a correct re-linking of the modules. Here is a more advanced and targeted approach to solve the problem, going beyond the simple reinstall command.Final Attempt: Purge and ReinstallWe need to completely remove the old, mismatched kernel modules and then force a clean installation. This is more aggressive than a simple reinstall and should clear out any corrupted files.Find the exact package names. First, find the exact package names of your current kernel's modules.Bashdpkg -l | grep 'linux-image-6.14' dpkg -l | grep 'linux-modules-extra-6.14' You will see output like linux-image-6.14.0-xx-generic and linux-modules-extra-6.14.0-xx-generic.Purge the existing modules. This command will remove the packages and their configuration files.Bashsudo apt purge <image_package_name> <modules_extra_package_name> (Replace the placeholders with the full package names you found in step 1.)Clean the package cache. This step removes any downloaded package files from the cache that might be corrupted.Bashsudo apt clean Reinstall the correct packages. Now, perform a clean install of the kernel modules. The (uname−r)commandiscrucialheretoensureaperfectmatchwiththekernelyouarerunning.Bashsudoaptupdatesudoaptinstalllinux−image−(uname -r) command is crucial here to ensure a perfect match with the kernel you are running.Bashsudo apt update sudo apt install linux-image-(uname -r) linux-modules-extra-$(uname -r) Reboot your system. This final reboot will ensure that a fresh, correctly installed kernel module is loaded on boot.If this still doesn't solve it, the only remaining option is a different kernel version. While you've expressed a preference not to change it again, the search results confirm that this specific kind of module mismatch error is often a kernel-specific bug that gets patched in a later version. Using the Mainline tool to install a 6.15 or 6.16 kernel is the most definitive solution.