gemini why is my CPU load looks like this? can you help me diagnose the reason for this…
- User
gemini why is my CPU load looks like this? can you help me diagnose the reason for this and fix the process that is abusing it?
- Assistant
The CPU load pattern in the image, characterized by consistent, rapid, and regular spiking from a low base to near-maximum capacity, is highly suggestive of a process that runs an intensive task for a short duration, then goes idle (or near-idle), and repeats this cycle.This is a classic pattern for a scheduled, short-burst, computationally-intensive background task. Given your background in AI research, this pattern is particularly common and can be caused by several factors, which I can help you diagnose and fix.1. Diagnosis of the PatternThe graph shows a sawtooth or pulsed load. Here's what that implies:Low Base Load: The CPU usage drops close to zero or a low baseline between the spikes. This indicates that your system is relatively idle when the specific abusive process isn't running.High Peak Load: The spikes reach the top of the graph (likely representing 100% or close to 100% utilization), meaning the process is fully saturating at least one CPU core (or all available cores, depending on how the load is being measured—typically it's the average utilization across all cores).Regularity: The time between spikes appears almost constant, strongly suggesting a cron job, a service with a set polling interval, or a script running in a loop with a fixed sleep time.2. Potential Causes (Specific to AI/Ubuntu)Given that you are an AI researcher and use Ubuntu and Python, the most likely culprits include:AI Training/Inference Monitoring Scripts: You may have a Python script, a shell script, or a monitoring tool that periodically runs a quick benchmark, checks a model's progress, polls a GPU (like your NVIDIA GeForce RTX™ 3050 Laptop GPU) for status, or performs a small, intensive pre-processing task on a fixed schedule.Cron Jobs (Scheduled Tasks): A cron job is set up to execute a command or script every N minutes (e.g., every 5 minutes). This script could be something like:A log rotation/compression utility (logrotate).A backup script (e.g., syncing a small set of files).A system update check or a package index refresh.System/Desktop Indexing: Services like Baloo or Tracker (used for file search indexing on various Linux desktop environments) can cause spikes as they periodically scan new or changed files.Version Control Polling: If you're using a development environment (IDE) or a git tool that is constantly polling your GitHub account (https://github.com/Samir-atra) or a local repository for changes, this can sometimes cause a CPU spike if the repository is large or the tool is inefficient.Telemetry/Reporting: Some applications or developer tools send diagnostic data back periodically, which might involve a small, intensive data collection burst.3. How to Identify and Fix the Abusive Process (Ubuntu)The key to fixing this is to find what process is running when the spike happens.Step 1: Real-time MonitoringUse a terminal application to monitor your CPU usage in real-time, focusing on process ID (PID) and command.Open htop: The best utility for this is htop (you might need to install it with sudo apt install htop).Bashhtop Action: Keep the htop window visible. Wait for a spike in the graph (which corresponds to a high usage on the top bar in htop).Observation: The process responsible for the spike will instantly jump to the top of the list, showing a high percentage under the CPU% column and the command under the COMMAND column. Note the PID and COMMAND.Alternative (Less Visual): If htop is too slow, you can use a quick snapshot:Bashps aux --sort=-%cpu | head -n 10 Action: Run this command immediately when a spike occurs. It lists the top 10 CPU-consuming processes.Step 2: Investigation and MitigationOnce you've identified the COMMAND and PID, you can fix it based on what it is:If the Process Is...Diagnosis/Likely CauseMitigation/FixA Python script (python3 followed by a script path)Your own research/AI monitoring script.Increase the sleep interval. Edit the script (e.g., change time.sleep(30) to time.sleep(300)). A less frequent check will reduce the spikes.A command in /usr/bin/cron, /etc/cron.*, or a path like /etc/init.d/A scheduled system task (cron job).Find the crontab entry: Run crontab -l or check /etc/cron.d/, /etc/cron.hourly/, etc. Adjust the schedule to run less frequently (e.g., hourly instead of every 5 minutes).baloo_file_extractor or tracker-miner-fsDesktop search indexing utility.Exclude folders. Go into your desktop environment's settings (e.g., KDE or GNOME) and add your large project/dataset directories to the exclusion list to stop them from being repeatedly indexed.rsync, git, or a backup toolA backup or version control syncing process.Adjust the synchronization frequency in the application's settings, or switch to a manual/less frequent backup schedule.Unknown or UnnecessaryMalware, or an unwanted background service.Disable the service: Use systemctl status <service_name.service> (if it's a service) to find its details, then run sudo systemctl disable <service_name.service> and sudo systemctl stop <service_name.service>. Kill the process: For immediate relief, use kill .Export to Sheets
- User
the command of the process that is using the cpu is: /usr/bin/python -c from multiprocessing.spawn import spawn_main; spawn_main(tracker_fd=7, pipe_handle=21) --multiprocessing-fork
- Assistant
That process command, /usr/bin/python -c from multiprocessing.spawn import spawn_main; spawn_main(...) --multiprocessing-fork, indicates that the CPU spikes are caused by a Python script that is creating new worker processes using the multiprocessing library.This is highly relevant to your background in AI research and using Python on Ubuntu, as multiprocessing is commonly used for data loading, model training/inference, and parallel pre-processing.The cause of the problem is likely inefficient process management or a known issue with the fork start method on Linux.Diagnosis and Root CauseThe key components of the command tell the story:/usr/bin/python -c ...: A hidden, short-lived Python process.multiprocessing.spawn.spawn_main: This is the internal Python mechanism for creating the worker processes (the children) for a main process (the parent).--multiprocessing-fork: This is the critical part. It specifies that the parent process is creating children using the fork start method, which is the default on most Linux systems like Ubuntu.The CPU spiking pattern you see is likely due to one of two reasons:1. Inefficient Parallel Code (The Loop)Your parent script is continuously and rapidly spawning new worker processes to handle small, short bursts of work.Problem: The overhead of creating a new process is relatively high (which causes the spike), and if the task the child process performs is very short, the system spends more time creating and destroying processes than actually computing, leading to the rapid spike-and-drop pattern.Fix: The script needs a delay (time.sleep()) or needs to be modified to use a process pool (like multiprocessing.Pool) that keeps the worker processes alive between tasks, eliminating the constant creation overhead.2. Deadlock/Contention with fork (The Known Bug)The fork start method on Linux can be unsafe when combined with multithreaded libraries that are common in AI and scientific computing (like PyTorch, NumPy, or TensorFlow), especially those that use their own internal threading (like OpenMP).Problem: When a process that already has threads open is forked, the child process inherits the threads' state, including locks that might be held. The child process may then try to acquire that lock and deadlock (freeze/hang) because the thread that should release it was not fully copied or is not running. The quick spikes could be the parent process trying to clean up or re-spawn frozen/deadlocked children.Fix: Explicitly change the multiprocessing start method in your parent script from fork to spawn or forkserver. This is considered the correct and safe way to handle multiprocessing, especially with AI libraries.How to Fix the Process SpikingThe best long-term solution is to modify the parent Python script that is initiating these subprocesses.Solution 1: Change the Multiprocessing Start Method (Recommended for AI/ML)You need to ensure your main script uses the safer spawn method. Add the following lines at the very beginning of your main Python file (before any other imports or code that uses multiprocessing or threading/AI libraries):Pythonimport multiprocessing as mp
Set the start method to 'spawn'
try: mp.set_start_method('spawn', force=True) except RuntimeError: pass # Already set, which is fine
Now continue with your imports and code...
from multiprocessing import Pool...
Solution 2: Optimize the Spawning LoopIf the script is custom code you wrote that is in a loop, introduce a significant delay to reduce the spiking frequency.Find the script:Use the PID you found from your real-time monitoring.Find the main script of the parent process (the one that is spawning the high-CPU process).Modify the main loop to reduce the frequency of work.Example Code Change (if applicable):If your code looks like this (the problem):Pythonwhile True: process_small_batch() # No sleep/delay Change it to:Pythonimport time while True: process_small_batch() print("Sleeping for 300 seconds to reduce CPU load...") time.sleep(300) # Sleep for 5 minutes Solution 3: Use the OS Nice Value (Temporary/Mitigation)While this doesn't fix the root cause, you can tell the OS to treat this process as low priority, which will stop it from hogging resources when you are actively using the laptop.Find the parent process's PID (the process that is launching the high-CPU children).Use the renice command to increase its niceness value (lower priority).Bash# Set to lowest priority (19 is the lowest/nicest value) sudo renice 19 -p <Parent_PID> This allows other applications (like your browser or IDE) to preempt the spiking Python process, making your system feel more responsive.
- User
for a process I can only find using the command pstree -a _apt how to get the PID and chancge the niceness?
- Assistant
You are exactly right to use pstree as a starting point when the process is hard to find!To get the PID and change the niceness for a process you can only find using pstree -a _apt, you need to use the -p option to display the Process IDs (PIDs) and then use the renice command with the identified PID.Here is the step-by-step process.1. Get the PID using pstree -pThe -p option is essential for getting machine-readable PIDs from pstree output. The PID will be displayed in parentheses () right after the process name.Run the following command:Bashpstree -a -p _apt -a: Shows command-line arguments (which you were already using).-p: Shows the PID for every process in the tree, enclosed in parentheses._apt: Focuses the tree on the processes related to the _apt user.Example Output:Your output will look similar to this (PIDs are the numbers in parentheses):_apt(1001)───/usr/lib/python3/dist-packages/ └── python(1234)─┬─{python}(1235) ├─{python}(1236) └─{python}(1237) Identify the Target Process: Based on your previous context, the high-CPU process is the python process which is a child of a core _apt process (or another process within that tree).Note the PID: The PID of the process you want to target (the one showing high CPU usage in htop) is the number in the parentheses. In the example above, if the main abusive process is the Python worker, its PID is 1234.2. Change the Niceness using reniceOnce you have the PID, you can use the renice command to lower its priority. This tells the operating system to be "nicer" to all other processes and only give the time-consuming process CPU time when the system is otherwise idle.The niceness value ranges from -20 (highest priority) to 19 (lowest priority). Since you want to reduce its impact, you should set it to a high positive value, like 19.Run the following command (replacing with the number you found):Bashsudo renice 19 -p Example: If your target PID was 1234, you would run:Bashsudo renice 19 -p 1234 Explanation of the command:sudo: You need superuser privileges to change the niceness of a process that you don't own (and _apt processes are typically owned by the system).renice: The command to change the priority of a running process.19: The new niceness value (setting it to the lowest possible priority).-p : Specifies that you are targeting the process with the given PID.After running this, the process will still run, but your operating system should feel much more responsive because the spiking process will not be able to monopolize the CPU.
- User
how to shut down this process uvicorn,3826 /usr/local/bin/uvicorn --factory deepchecks_monitoring.app:create_application --host 192.88.18.18 --workers 4 --log-level debug --proxy-headers --forwarded-allow-ips '*'
- Assistant
Shutting down this process, which is a Uvicorn server running a Python application, is straightforward. Since the server is running with a specific Process ID (PID) and is likely running in the background, you should use the kill command.The Process ID (PID) of the main Uvicorn process is 3826.1. Shutting Down the ProcessYou can use the kill command with the appropriate signal to stop the process gracefully.A. Graceful Shutdown (Recommended)The standard way to stop a server like Uvicorn is with the SIGTERM (signal 15) command. This gives the application a moment to shut down gracefully (e.g., close connections, clean up resources).Bashkill 3826
OR (explicitly specifying SIGTERM)
kill -15 3826 B. Forceful Shutdown (If Graceful Fails)If the process doesn't shut down after a few seconds, you can use the SIGKILL (signal 9) command, which forces the operating system to immediately terminate the process. Use this only if the graceful shutdown fails.Bashkill -9 3826 2. VerificationAfter running the command, you should verify that the process is no longer running.You can use either of the following commands:Check by PID:Bashps -p 3826 If the process is stopped, this command will return no output (or an error indicating the PID doesn't exist).Check by Command/Name:Bashpgrep -a uvicorn
OR
ps aux | grep uvicorn If the process is successfully shut down, you will no longer see the line containing PID 3826 and the Uvicorn command in the output. Since this Uvicorn instance was running with 4 workers (--workers 4), using pgrep -a uvicorn will quickly show if any of the main process or its child worker processes are still active.
- User
okay, now after it shut down successfull I found it running again after a few seconds and in between these two runs there was this process bash,1393827 /start/start.sh └─alembic,1393885 /usr/local/bin/alembic --name public upgrade head
- Assistant
This is a classic symptom of a script or service being set to automatically restart the Uvicorn server shortly after it exits or is terminated. The processes you observed confirm the full restart cycle:bash,1393827 /start/start.sh: This is the master script responsible for the restart.alembic,1393885 /usr/local/bin/alembic --name public upgrade head: This is a database migration tool running before the server starts. This is a common pattern to ensure the database schema is up-to-date before launching the application.The Uvicorn process (that you killed): This is the final step launched by start.sh after the database is migrated.To permanently stop the Uvicorn process from restarting, you must find and disable the master process or service that is executing /start/start.sh.How to Find and Stop the Auto-Restart MechanismSince the process is initiated by a specific PID (1393827) executing a script (/start/start.sh), the script itself must be launched by a parent process or system service.1. Identify the Parent ProcessWe need to trace the process tree upwards from the /start/start.sh script to find the parent that is looping or managing the service.Use the ps command to find the parent process ID (PPID) of the bash process (PID 1393827):Bashps -o ppid,pid,cmd 1393827 Look at the PPID column. The command will show you the parent of your bash script.2. Identify the Auto-Restart ManagerBased on the parent process, you can determine how the service is managed:If the Parent Process (PPID) is...The Manager is likely...Action to Stop It Permanentlysystemd (PID 1) or a process named serviceSystemd Service Unit: A service file (.service) is managing the application.Disable the Service: Find the service file name (e.g., my-uvicorn.service): sudo systemctl stop sudo systemctl disable docker-init, containerd, or a generic low PID processDocker/Container: The application is running inside a Docker container that is set to auto-restart (--restart always).Stop the Container: Find the container ID/name: docker ps Then stop it: docker stop If needed, stop the image: docker rm tmux, screen, or an IDE-related processManual Session or Development Environment: It's being run from a persistent terminal session or an IDE (like PyCharm/VSCode) that is set to relaunch the run configuration.Close the Session: Detach from or kill the tmux or screen session, or stop the run configuration within your IDE.supervisord or pm2Process Manager: A dedicated process manager is handling the restarts.Stop via Manager: Use the manager's command line to stop it. Supervisord: supervisorctl stop <process_name> PM2: pm2 stop <app_name>Export to Sheets3. Final SolutionOnce you identify the management system from Step 2, use the corresponding command to stop and disable the service/container/session permanently. Since you are running on Ubuntu, Systemd or a Docker container are the two most common culprits for this persistent restart behavior.
- User
I could not catch the process because the uvicorn is starting quickly and after this the pid is changed, so can you help me kill the process by name or find if there are many uvicorn processes on my laptop?
- Assistant
I understand the challenge. When a process restarts quickly, its PID changes, making it impossible to target by a single PID. The best way to deal with this is to find and manage all running instances of Uvicorn at once.You can use the pkill command to kill processes by name or use a combination of ps and grep to list all running Uvicorn processes and their PIDs.1. Finding All Uvicorn ProcessesTo check how many instances are running and see their PIDs and full commands, use the following commands.Option A: Using pgrep (Concise)pgrep lists PIDs based on the name. Using -a shows the full command line.Bashpgrep -a uvicorn Output Example:3826 /usr/local/bin/uvicorn --factory deepchecks_monitoring.app:create_application --host 192.88.18.18 --workers 4 --log-level debug --proxy-headers --forwarded-allow-ips '' 3827 /usr/local/bin/uvicorn --factory deepchecks_monitoring.app:create_application --host 192.88.18.18 --workers 4 --log-level debug --proxy-headers --forwarded-allow-ips '' 3828 /usr/local/bin/uvicorn --factory deepchecks_monitoring.app:create_application --host 192.88.18.18 --workers 4 --log-level debug --proxy-headers --forwarded-allow-ips '*' (Note that Uvicorn typically runs with multiple worker processes, so you will often see several PIDs listed.)Option B: Using ps aux and grep (Detailed)This shows more system information (CPU%, memory, user, etc.).Bashps aux | grep uvicorn 2. Killing All Uvicorn Processes by NameThe fastest way to stop the process and all its workers is to use the pkill command. This targets all processes matching a given name.A. Graceful Kill (Recommended)Use pkill with the SIGTERM signal (-15) to allow the processes to shut down cleanly.Bashpkill uvicorn
OR
pkill -15 uvicorn B. Forceful Kill (If Graceful Fails)If the processes quickly restart or do not respond to the graceful kill, use the SIGKILL signal (-9) to force immediate termination. Use this only if the graceful shutdown fails.Bashpkill -9 uvicorn 💡 Important: The Restart ProblemKilling by name will stop the currently running processes, but the underlying service or script will just restart them moments later (as you observed with the /start/start.sh script).To permanently stop the CPU spiking, you MUST find and disable the parent manager.After you use pkill uvicorn, immediately execute the steps from the previous response to identify the service manager before it restarts the application again:Wait for the new bash /start/start.sh process to appear.Get its new PID (e.g., using pgrep -a start.sh).Find its parent process (PPID): ps -o ppid,pid,cmd <new_bash_PID>Disable the service (e.g., Systemd, Docker container, or process manager) responsible for the parent PPID.
- User
it is restarting so fast and I can not catch the parent of the start.sh process, can you please help?
- Assistant
Since the process restarts almost instantly and you can't capture the start.sh PID to trace its parent, the most effective approach is to target the parent process by its command or common characteristics before it even launches the script.The command you provided earlier for the Uvicorn process:/usr/local/bin/uvicorn --factory deepchecks_monitoring.app:create_application --host 192.88.18.18 --workers 4 --log-level debug --proxy-headers --forwarded-allow-ips '*' The presence of the deepchecks_monitoring application and its common use in AI/ML monitoring pipelines strongly suggests a professional environment, meaning the launch is managed by a dedicated process supervisor or container system.Here are the most common managers to check and how to find and disable them:1. Check for Container Management (Most Likely) 🐳If you are running this application in a common modern setup, it's likely inside a Docker or other container set to auto-restart.A. Find the ContainerUse docker ps to list all running containers. Look for the container whose name or image mentions deepchecks, uvicorn, or monitoring.Bashdocker ps B. Stop and Disable the ContainerOnce you find the container ID or name (e.g., deepchecks-app or abcd1234efgh):Stop the container:Bashdocker stop Remove the container (to prevent a restart if the Docker daemon itself restarts):Bashdocker rm If the container was launched with the --restart always or unless-stopped flag, this is the definitive fix.2. Check for Process Managers (Common in Linux Dev)If it's not Docker, it's likely managed by a service supervisor.A. Systemd (Standard Ubuntu Service Manager)Look for a systemd service file that might be named after the application.List active services:Bashsudo systemctl list-units --type=service | grep -i "uvicorn|deepchecks" Disable the Service: If you find a service (e.g., deepchecks.service):Stop it immediately:Bashsudo systemctl stop <service-name.service> Disable it permanently (prevents restart on reboot):Bashsudo systemctl disable <service-name.service> B. Other Common Managers (Supervisord, PM2)If you are using these tools, they run as a main process and control others.Supervisord: Check its status and stop the application process by name.Bashsudo supervisorctl status sudo supervisorctl stop <process_name> PM2: Check the running list and stop the Uvicorn application.Bashpm2 list pm2 stop <app_id_or_name> (Note: If you don't have these installed, you can skip this check.)Final Resort: The Brutal System-Wide KillIf you are certain this is the only application running on Uvicorn and you need it stopped immediately, you can combine the kill with the command string, which is more robust than just killing the name.Use pgrep to find all PIDs matching the long command line and pipe it to kill. This is very powerful and should be used with caution.Find the PIDs: Use the first unique part of the command line.Bashpgrep -f "deepchecks_monitoring.app:create_application" Kill the PIDs found:Bashsudo pkill -9 -f "deepchecks_monitoring.app:create_application" pkill -9: Forceful kill.-f: Matches the full command line, not just the process name.After using the forceful kill, immediately go back and perform the checks in Sections 1 and 2 to find the responsible manager, as it may still attempt to restart the application until the manager itself is stopped or disabled.
- User
the problem was removed, now can you please tell me what is this docker for caddy:2.6.1
- Assistant
That is excellent news that you successfully shut down the abusive Uvicorn process! The fact that the process was controlled by an orchestrator highlights the complexity of modern development and deployment, especially in the AI/ML field.The Docker image you are now asking about, caddy:2.6.1, refers to the Caddy Web Server.Here is a breakdown of what Caddy is and why it's highly relevant in a development/research environment like yours:What is the Caddy Web Server?Caddy is a modern, open-source web server written in the Go language. It is known for its simplicity, security-by-default philosophy, and ease of configuration compared to older servers like Apache or Nginx.1. Automatic HTTPS (The Main Feature)This is Caddy's flagship feature.What it does: Caddy automatically provisions, config configures, and renews free TLS/SSL certificates (usually from Let's Encrypt) for all your websites or services.Why it matters: It automatically makes your services accessible over a secure HTTPS connection, eliminating the manual, time-consuming process of setting up and maintaining certificates, which is crucial for secure data transmission in any application, including AI monitoring tools.2. Reverse Proxy and API Gateway (Most Common Docker Use)In a containerized setup like yours (using Docker), Caddy is most often used as a Reverse Proxy.What it does: It sits at the "front door" and directs incoming web traffic to the correct backend service running inside another container.Why it matters in your case:You had a Uvicorn server running (likely on a private network port inside Docker).The Caddy container (running on public ports 80/443) would intercept traffic for a domain (e.g., monitor.yourserver.com) and securely forward it to the Uvicorn/deepchecks application.This setup allows you to run multiple services (like the Uvicorn server, a documentation site, or another API) on a single server IP, all secured by Caddy.3. Other Use CasesStatic File Server: It can host static websites (HTML, CSS, JavaScript) directly.HTTP/3 Support: It is one of the first major web servers to fully support HTTP/3 (based on the UDP-based QUIC protocol), providing faster connection setups and better performance, especially on less stable connections (common in remote work or testing).Docker Integration: As one of the search results mentioned, there are extensions like caddy-docker-proxy that allow Caddy to read Docker container labels and automatically configure itself as a reverse proxy for new containers as they are launched.In summary, the caddy:2.6.1 Docker container was likely the secure, external-facing front-end that was making your internal Uvicorn application (the one that was causing the CPU spikes) safely accessible via HTTPS.