I am looking for a bms for a usb powered device with a lithium ion battery for wireless…
- User
I am looking for a bms for a usb powered device with a lithium ion battery for wireless operation. The IC needs to handle power path and I need a way to turn the device "off" such that the battery can charge but cannot discharge to power the circuit
Assistant
Recommended BMS ICs and Solutions for USB-Powered Lithium-Ion Devices
For a USB-powered device using a lithium-ion battery that requires both power path management and the ability to "turn off" the device (allowing the battery to charge but not discharge to the load), you need a battery management IC or module with the following features:
- Integrated power path management (seamless switching between USB power and battery)
- Battery protection (overcharge, overdischarge, overcurrent)
- A method to disconnect the battery from the load while still allowing charging
IC Recommendations
Texas Instruments BQ Series
Texas Instruments offers several ICs designed for USB-powered lithium-ion applications with integrated power path management. Notably:
-
BQ2407x, BQ2416x, BQ2425x, BQ2429x, BQ2560x, and BQ25731: These ICs provide power path control, allowing the system to be powered from USB when available and from the battery otherwise. They also support battery charging and protection features. Some models support I²C control for advanced power path and charging management[3].
-
Power Path Control: These ICs can automatically switch the system load between USB input and battery, ensuring the device operates seamlessly whether charging or running on battery[3].
-
System Enable/Disable: Many of these ICs have an enable (EN) or system power (SYS) pin that can be used to disconnect the system load from the battery, effectively turning the device "off" while still allowing the battery to charge[3].
Disabling Battery Discharge While Charging
To achieve the "charge-only" mode (battery charges but does not power the load):
-
Use the SYS/EN pin (or similar) to disconnect the system load from the battery. When this pin is de-asserted, the battery is isolated from the system, but the charging path remains active, allowing the battery to charge from USB while not discharging to the load[3].
-
Alternatively, you can use a load switch or MOSFET controlled by your microcontroller or a physical switch to disconnect the battery from the load. This is a common approach in custom designs and can be implemented with a P-channel MOSFET or a dedicated load switch IC[6][8].
Example Circuit
A typical implementation uses a charger IC like the BQ2425x series:
- USB Input → Charger IC (with power path) → System Load (SYS pin) and Battery (BAT pin)
- EN/SYS Pin: Control this pin to disconnect the load when you want the device "off" but still allow charging.
Off-the-Shelf Modules
- Some modules based on the TP4056 IC offer basic charging and protection but lack true power path management and system enable/disable. For more advanced features, look for modules based on the BQ2425x or similar ICs, which are available from various suppliers[5][8].
Additional Notes
- If you need to implement this feature using discrete components, you can use a combination of a charger IC (like TP4056), a protection circuit (DW01 + 8205A), and a load switch (P-FET or dedicated IC) to control the connection between the battery and the load[8].
- For multi-cell packs or higher current requirements, consider more advanced BMS ICs with I²C/SPI control and programmable protection features[3][6].
Summary Table
Feature Basic TP4056 Module TI BQ2425x/BQ2560x/BQ25731 Custom MOSFET Switch Power Path Management No Yes Possible Battery Protection Basic (with DW01) Advanced Depends on circuit System Load Disconnect No Yes (EN/SYS pin) Yes USB Charging Yes Yes Yes Multi-cell Support No Some models Yes (with design) Conclusion
For your requirements, a Texas Instruments BQ2425x, BQ2560x, or BQ25731 series IC is highly recommended, as these provide integrated power path management and a system enable/disable function, allowing you to charge the battery from USB while disconnecting the load as needed[3]. Alternatively, you can implement a custom solution using a MOSFET load switch in conjunction with a basic charger and protection circuit[6][8].
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.