Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro-exp-03-25-grounding· GoogleHugging Face LMArena Search Arena 24K

strategies of pix (growth regulator) in cotton crop... low multiple rates and others...

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Perplexitysonar-reasoning-pro-high’s answer.
  1. User

    strategies of pix (growth regulator) in cotton crop... low multiple rates and others...

  2. Gemini Assistant

    Pix, containing the active ingredient mepiquat chloride, is a plant growth regulator (PGR) widely used in cotton production to manage vegetative growth.[1][2] Proper application strategies aim to balance vegetative and reproductive growth, potentially leading to benefits like reduced plant height, improved boll retention, enhanced earliness, and easier harvesting.[3]

    Here are some common strategies for applying Pix (mepiquat chloride) in cotton:

    1. Traditional / Single or Split High-Rate Strategy:

      • Historically, higher rates of Pix (e.g., 0.5 to 1 pint per acre) were often applied once or twice, typically starting around early bloom.
      • The timing and rate depend on factors like plant height and growth rate at early bloom. For instance, if cotton is growing rapidly and exceeds certain height thresholds (e.g., >24 inches at early bloom, >28 inches one week later), higher rates might be applied.
      • This approach may be suitable in situations where excessive growth is anticipated later in the season. However, results could be erratic, and there's a risk of applying too much if conditions turn stressful (dry, cool) after application.[1]
    2. Low Rate Multiple (LRM) Strategy:

      • This approach involves applying lower rates of Pix (e.g., 2 to 8 ounces per acre, or 1/8 to 1/4 pint per acre) multiple times (up to four applications or more) throughout the growing season.
      • Applications often start earlier, such as at pinhead square, matchhead square (around 8-10 nodes), or slightly later, and continue based on plant monitoring and growing conditions.
      • Rationale: LRM offers a more conservative and flexible approach. It allows growers to fine-tune growth management based on real-time plant needs and changing environmental conditions.
      • Benefits: It minimizes the risk of over-application and stunting the crop if stress conditions (like drought or cool weather) arise, as less product is invested at any one time. It can enhance early season boll retention and provide more consistent growth control.
      • Considerations: Requires more frequent plant monitoring and potentially more trips across the field. It might be less effective in controlling vigorous growth in tall varieties on fertile soils compared to higher rate strategies.[3]
    3. Plant Monitoring Based Strategies:

      • Applications are triggered based on specific plant measurements rather than just growth stage or calendar date.
      • Key parameters monitored include plant height, height-to-node ratio, internode length (especially between the top 4-5 nodes), and square retention. Monitoring typically starts around matchhead square.[3][4]
      • For example, one method involves measuring the length of the top five internodes.[5] If this length divided by three exceeds a certain threshold, a Pix application (often using LRM rates) is suggested.[5] Another guideline suggests considering a PGR if the internode length between nodes 2, 3, or 4 is greater than 2 inches.[4]
      • This is crucial for both LRM and traditional strategies to ensure Pix is applied only when needed and avoids application during periods of plant stress.
    4. Wick Applicator Strategy:

      • This method uses a specialized wick applicator (often mounted on other equipment) to wipe a Pix solution onto the tops of the cotton plants.[6]
      • Benefits: It targets only the tallest plants in a field, which is useful in fields with uneven growth. This avoids applying Pix to shorter, potentially stressed plants.[5][7] It uses lower volumes of solution, allowing more acreage to be treated per tank, and eliminates the need for complex spray equipment like pumps and nozzles.[8] Research suggests it can be very effective, potentially reducing height more than spray applications.
      • Calibration: These wick systems can be calibrated to apply specific rates per acre.[6]

    Factors Influencing Strategy Choice:

    • Cotton Variety: Varieties differ in their growth habits and responsiveness to PGRs.[4][9] More aggressive or indeterminate varieties may require earlier or more frequent applications, potentially at higher rates within the chosen strategy.[9][10]
    • Environmental Conditions: Applications should be avoided when the crop is under stress (drought, cool temperatures). Favorable growing conditions (adequate moisture, fertility, warmth) often necessitate PGR use.[10] Forecasted weather plays a role in deciding rates, especially in non-irrigated cotton.
    • Growth Stage: Pre-bloom cotton is more sensitive to mepiquat than flowering cotton.[3] Excessive rates applied too early, especially before bloom, carry the highest risk of stunting and inducing premature cutout.[1][3]
    • Field History & Fertility: Fields with a history of rank growth or high nitrogen levels may require a more aggressive PGR approach.[9]
    • Management Goals: Prioritizing height control (e.g., for stripper harvesting), enhancing earliness, or improving boll retention can influence the chosen strategy.

    In summary, while single high-rate applications exist, the Low Rate Multiple (LRM) strategy has become popular due to its flexibility and reduced risk. Regardless of the strategy, basing applications on careful plant monitoring and considering environmental conditions, variety characteristics, and specific management goals is key to successfully using Pix in cotton.[3]

  3. User

    why strategy is used more in Brazil?

  4. Gemini Assistant

    Based on the search results, the widespread and strategic use of plant growth regulators (PGRs) like Pix (mepiquat chloride) in Brazilian cotton production is driven primarily by the country's growing conditions and advanced farming practices:

    1. Tropical/Subtropical Climate & Favorable Conditions: Brazil's major cotton-growing regions, particularly the Cerrado, experience conditions (adequate rainfall, warmth, sunlight, often fertile soils) that promote vigorous, often excessive, vegetative growth in cotton plants. [3, 4, 16, 24] This "rank growth" can lead to problems like:

      • Self-shading: Dense foliage reduces light penetration into the canopy, potentially lowering boll retention and yield, especially on lower branches. [3, 10, 16][2][4][8]
      • Harvesting Difficulties: Overly tall plants (often exceeding the ideal 1.2-1.3 meters) interfere with the efficiency of mechanical harvesting, which is standard practice in Brazil. [2, 3, 10, 17, 24][2][4][8]
      • Pest/Disease Issues: Dense canopies can hinder the coverage of pesticides and create humid microclimates favorable for diseases like boll rot. [3, 5, 10]
    2. Need for Growth Management: To counteract excessive vegetative growth and optimize yields, Brazilian growers rely heavily on PGRs like mepiquat chloride.[12] The goal is to manipulate the plant's architecture, creating a better balance between vegetative (leaves, stems) and reproductive (squares, bolls) development.[10] [1, 3, 4, 6, 14, 18] This management aims to:

      • Control plant height for easier management and harvest. [2, 3, 6, 10][2][4][8]
      • Improve light penetration within the canopy. [3, 6]
      • Enhance early boll retention and potentially increase overall yield and fiber quality.[13] [1, 3, 6, 9, 18][2][4][8]
      • Promote earlier maturity. [2, 6][2][4][8]
    3. Flexible and Monitored Application Strategies: While specific strategies might vary, the approach in Brazil emphasizes flexibility and careful monitoring rather than fixed calendar-based applications. [3, 4]

      • Applications often start early (e.g., pinhead square or first floral bud) using lower rates. [4, 14][2][4][8]
      • Subsequent applications depend heavily on monitoring plant growth (height, internode length, height-to-node ratio) and environmental conditions (temperature, rainfall/water availability). [1, 3, 4, 16, 20] High temperatures, for instance, may necessitate higher PGR rates.[14] [4, 16][2][4][8]
      • Multiple low-rate applications are common to manage growth throughout the season as needed. [4, 14][2][4][8]
    4. Advanced Farming Systems: Brazilian cotton farming, especially on larger scales, is technologically advanced. [17, 20, 24]

      • Double Cropping: A significant portion of Brazilian cotton (especially in Mato Grosso) is grown as a second crop after soybeans, requiring precise management, including PGRs, to fit the growing window. [15, 17, 24][2][4][8]
      • Precision Agriculture: There is growing interest and research in variable-rate application (VRA) of PGRs, using tools like drones and sensors to tailor applications based on spatial variability within fields, further optimizing use and potentially increasing yields. [7, 12, 20, 26][2][4][8]

    In summary, the strategy of using Pix (mepiquat chloride) is prevalent and carefully managed in Brazil because the tropical growing environment naturally encourages excessive plant growth, which must be controlled to optimize yield, quality, and harvest efficiency within their highly mechanized and increasingly precise farming systems.

  5. User

    Is LRM ?

  6. Gemini Assistant

    Yes, LRM stands for Low Rate Multiple.

    In the context of cotton production and plant growth regulators (PGRs) like Pix (mepiquat chloride), the LRM strategy refers to:

    • Low Rate: Applying smaller amounts (lower doses) of the PGR in each application compared to traditional, higher-rate methods.
    • Multiple: Making several applications (often 3, 4, or more) spread out over the growing season.

    This approach involves:

    1. Starting Early: Often beginning applications earlier in the plant's development, such as at pinhead square or matchhead square.
    2. Frequent Monitoring: Basing the timing and necessity of subsequent low-rate applications on careful monitoring of plant growth (e.g., height, height-to-node ratio, internode length) and environmental conditions.
    3. Flexibility: Allowing growers to adjust the PGR program based on how the crop is actually growing and reacting to the environment, rather than relying solely on a pre-set schedule or growth stage.
    4. Risk Management: Reducing the risk of applying too much PGR at once, which could excessively stunt the plants if unexpected stress (like drought or cool weather) occurs shortly after application.

    So, LRM is a specific management strategy for using PGRs in cotton that emphasizes frequent, smaller applications guided by ongoing crop monitoring.

  7. User

    I made all this applications and dosis

    80 300 200 300 400 400 200 500

  8. Gemini Assistant

    Okay, let's look at that sequence of Pix application doses:

    80, 300, 200, 300, 400, 400, 200, 500

    Assuming these doses are in ml per hectare (ml/ha), which is a common unit for Pix application in regions like Brazil:

    1. Number of Applications: You made 8 separate applications.
    2. Variable Rates: The rates vary significantly, starting low (80 ml/ha) and generally increasing, with some fluctuations (e.g., dropping back to 200 ml/ha before the final 500 ml/ha application).
    3. Total Cumulative Dose: Adding these up gives a total seasonal dose of: 80 + 300 + 200 + 300 + 400 + 400 + 200 + 500 = 2480 ml/ha

    Analysis of the Strategy:

    • Strong Indication of LRM: This pattern strongly aligns with the principles of a Low Rate Multiple (LRM) or a highly flexible, monitoring-based strategy.
      • The multiple applications (8) are characteristic.
      • Starting with a low dose (80 ml/ha) is typical for early-season LRM applications (often around matchhead square or slightly later).
      • The varying rates suggest that applications were likely timed and adjusted based on monitoring plant growth (e.g., height-to-node ratio, internode length) and responding to environmental conditions and the crop's vigour at different stages.
    • Responding to Growth Pressure: The trend of increasing rates later in the sequence (400, 500 ml/ha) likely indicates the need for stronger growth regulation as the plants got larger or as growing conditions became more favorable for vegetative growth later in the season. The dips back to 200 ml/ha might reflect periods where growth slowed slightly (perhaps due to temporary weather changes) or a decision was made to apply a moderate dose.
    • Total Dose: A total cumulative dose of 2480 ml/ha (approximately 2.5 L/ha) is substantial but can certainly be within the necessary range for cotton grown in high-growth potential environments (like much of Brazil) where significant vegetative control is needed throughout the season to manage plant height, improve light penetration, and optimize yield. If using a standard formulation (e.g., ~50 g/L mepiquat chloride), this equates to roughly 124 grams of active ingredient per hectare, which is a plausible seasonal total in such conditions.

    In Conclusion:

    This sequence of applications represents a dynamic, multi-application strategy, very consistent with the LRM philosophy. It wasn't a fixed-rate approach but rather seems to have been adjusted based on the crop's needs over time. The success of this strategy depends heavily on when each application was made relative to the crop's growth stage and the prevailing environmental conditions.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.