In Linux (RHEL 8.8), I've tried a pinning the IRQ CPU affinity of certain input devices,…
- User
In Linux (RHEL 8.8), I've tried a pinning the IRQ CPU affinity of certain input devices,
for i in /proc/irq/*/; do if [ -f $i/smp_affinity_list ]; then echo "0,1,48,49" > $i/smp_affinity_list; fi; doneI am getting write error: Input/output error Note: I am logged in as root, and the CPU List is valid, and I am aware that some IRQs might have their affinity hardcoded by the kernel and cannot be changed.
Assistant
Understanding IRQ CPU Affinity Errors in Linux
You're encountering an "Input/output error" when trying to set the CPU affinity for IRQs in your RHEL 8.8 system. This is a common issue when dealing with IRQ affinity configuration, and there are several reasons why this might happen.
Why You're Getting Input/Output Errors
There are multiple reasons why setting IRQ affinity fails with an I/O error:
-
Non-modifiable IRQs: Some IRQs have their affinity hardcoded by the kernel as you mentioned. These include timer interrupts, IPI (Inter-Processor Interrupts), and some built-in device interrupts[1][3].
-
IRQ Controller Limitations: If an IRQ controller does not support IRQ affinity, then the value will not change from the default of all CPUs[1].
-
Attempted Disabling of All CPUs: It's not allowed to turn off all CPUs for an IRQ. At least one CPU must be able to handle the interrupt[1][3].
-
Active IRQs: Some interrupts might be actively being used and cannot have their affinity changed while in use[2].
How to Fix the Issue
Here's a more targeted approach to set IRQ affinity that will avoid the errors:
for irq_dir in /proc/irq/*/; do irq_num=$(basename "$irq_dir") if [ -f "${irq_dir}smp_affinity_list" ]; then # Check if this is a modifiable IRQ if grep -q "virtio\|eth\|xhci\|ahci" "${irq_dir}/name" 2>/dev/null; then echo "Setting affinity for IRQ $irq_num" echo "0,1,48,49" > "${irq_dir}smp_affinity_list" 2>/dev/null || echo "Failed to set affinity for IRQ $irq_num" fi fi doneThis script:
- Only targets common device IRQs that are typically modifiable
- Reports failures without stopping the script
- Ignores IRQs that are likely to be non-modifiable
Alternative Approach Using Hexadecimal Mask
You can also try using the hexadecimal bitmask format instead of the CPU list:
# For CPUs 0,1,48,49 in a 64-CPU system # The mask would be: 0x0003000000000003 for irq_dir in /proc/irq/*/; do if [ -f "${irq_dir}smp_affinity" ]; then echo "0003000000000003" > "${irq_dir}smp_affinity" 2>/dev/null fi doneFor systems with more than 32 cores, you need to use commas to separate the hexadecimal values for each 32-bit group[3]. For CPUs 0,1,48,49 on a system with 64 CPUs, the mask would be split as: "00030000,00000003"[4].
Checking Current IRQ Affinity Settings
Before making changes, it's helpful to examine your current IRQ settings:
# View all IRQs and their current assigned CPUs cat /proc/interrupts # Check current affinity for specific IRQs cat /proc/irq/53/smp_affinity_list # Example for IRQ 53Targeting Specific Device IRQs
Instead of trying to modify all IRQs, target specific ones related to your devices:
# Find IRQs for network devices grep eth /proc/interrupts # Set affinity for specific IRQ echo "0,1,48,49" > /proc/irq/53/smp_affinity_list # Replace 53 with your IRQ numberIRQ Balancing Considerations
Note that if
irqbalancedaemon is running on your system, it might override your manual settings. Consider disabling it if you want persistent manual IRQ affinity settings[2][4]:systemctl stop irqbalance systemctl disable irqbalanceRemember that optimizing IRQ affinity can improve performance by allowing the specified interrupt and application threads to share cache lines. This is especially beneficial when you assign both interrupt affinity and application affinity to the same processor or processors on the same core[6].
-
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.