Skip to content
TheChatArchiveThe Chat Archive
Perplexitysonar-reasoning-pro-high· PerplexityHugging Face LMArena Search Arena 24K

program main implicit none integer ndivx, ndivy, ndivz, totnode, nt, maxfam, nnum,…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with gpt-4o-search-preview-high’s answer.
  1. User

    program main

    implicit none

    integer ndivx, ndivy, ndivz, totnode, nt, maxfam, nnum, cnode, i, j, k, tt, nbnd, bottomtotint,mt,a,b,numbingban parameter(ndivx = 100) parameter(ndivy = 100) parameter(ndivz = 3) parameter(nbnd = 3) parameter (totnode = (ndivxndivy+ndivxnbnd4) ndivz) parameter(maxfam = 5000)

    real *8 length, width, thick, dx, delta, dens, emod, pratio, area, vol, bc,crlength,maxp,w,r,kk,bt,r0,RR,S,distance,z,v,dens0,dens1,H,H1,H2 real *8 sedload1, sedload2, sedload3, dt, totime, ctime, idist, fac, radij, nlength, dforce1, dforce2, dforce3 real *8 pi, tmpdx, tmpvol, tmpcx, tmpux, tmpcy, tmpuy, tmpcz, tmpuz, dmgpar1, dmgpar2, theta, phi real *8 scr, scx, scy, scz, coordx, coordy, coordz, cn, cn1, cn2, appres, alpha, dtemp real *8 scr0

    real *8 coord(totnode,3), pforce(totnode,3), pforceold(totnode,3), bforce(totnode,3), stendens(totnode,3) real *8 fncst(totnode,3), fncstold(totnode,3), disp(totnode,3) real *8 vel(totnode,3), velhalfold(totnode,3), velhalf(totnode,3), andisp(totnode,3) real *8 acc(totnode,3), massvec(totnode,3), dmg(totnode,1),summation(totnode,1),summ(totnode,1) integer numfam(totnode,1),numfamily(totnode,1), pointfam(totnode,1), pointfamily(totnode,1),nodefam(100000000,1),nodefamily(100000000,1), alflag(totnode,1), fail(totnode,maxfam)

    pi = dacos(-1.0d0)

    do i = 1, totnode !coord: Material point locations, 1:x-coord, 2:y-coord, 3:z-coord coord(i,1) = 0.0d0 coord(i,2) = 0.0d0 coord(i,3) = 0.0d0 !numfam:初始化家族关系 numfam(i,1) = 0 ! 家族成员数量 numfamily(i,1) = 0 ! 家族索引 summation(i,1) = 0.0d0 ! 累计量 summ(i,1) = 0.0d0 !pointfam:初始化点家族关系 pointfam(i,1) = 0 pointfamily(i,1) = 0 !pforce:初始化力数组 pforce(i,1:3) = 0.0d0 ! 总力 pforceold(i,1:3) = 0.0d0 ! 上一步力 !bforce: 初始化体力数组 bforce(i,1:3) = 0.0d0 !stendens: 初始化应变能密度 1:loading 1, 2:loading 2, 3:loading 3 stendens(i,1:3) = 0.0d0 !fncst: 初始物质点表面修正系数, 1:loading 1, 2:loading 2, 3:loading 3 fncst(i,1:3) = 1.0d0 fncstold(i,1:3) = 1.0d0
    !disp: 初始化位移数组 disp(i,1:3) = 0.0d0 !vel: 初始化速度数组 vel(i,1:3) = 0.0d0 velhalfold(i,1:3) = 0.0d0 velhalf(i,1:3) = 0.0d0 !acc:初始化加速度数组 acc(i,1:3) = 0.0d0 !massvec: 初始化质量向量,自适应动态松弛的质量向量 massvec(i,1:3) = 0.0d0 !andisp:初始化分析位移 andisp(i,1:3) = 0.0d0 ! 初始无失效
    fail(i,1:maxfam) = 1
    !dmg: 初始化损伤数组 dmg(i,1) = 0.0d0 enddo ! 初始化家族关系数组 do i = 1, totnode nodefam(i,1) = 0 nodefamily(i,1) = 0 enddo

    ! 几何参数设置 !length: 结构总长度 length = 16.0d0 !width: 结构总宽度 width = 16.0d0 !dx: 材料点之间的间距 dx = length / ndivx !thick: 总厚度(基于单元尺寸) thick = ndivz*dx

    ! 动态参数计算 delta = 3.015d0*dx !影响半径 dens0 = 900.0d0 !冰的密度 dens1 = 1000.0d0 !水的密度 emod = 0.3d9 ! 弹性模量 bc = 12.0d0 * emod / (pi * (delta**4.0d0))!bc: 键刚度系数 pratio = 1.0d0 / 4.0d0 !pratio: 泊松比 dtemp = 0.0d0 !dtemp:温度变化量 area = dx * dx !单元横截面积 vol = area * dx !单元体积 sedload1 = 0.6d0 * emod * 1.0d-6 !沿x轴一个物质点的应变能量密度
    sedload2 = 0.6d0 * emod * 1.0d-6 sedload3 = 0.6d0 * emod * 1.0d-6

    ! 时间步长计算 !dt: Time interval约为1微秒 dt = 0.8d0 * dsqrt(2.0d0dens0dx/(pidelta**2.0d0dx*bc))

    ! 炸药参数设置 !炸药位于水面(r = H - dens0thick/dens1),通过冲击波参数 RR 扩展 w=5.0d0 !炸药质量,单位:kg H1=1.5d0 H2=3.0d0 H=SQRT(H12+H22) !测点到炸药中心的距离,单位:m r=H-dens0thick/dens1 !冰底面到炸药中心的距离,单位:m r0=(3.0d0w/(4.0d0pi1600.0d0))**(1.0d0/3.0d0) !球形药包半径,单位:m ! 冲击波参数计算 if(r/r0.ge.6.0d0.and.r/r0.lt.12.0d0)then maxp=4.41d01.0d7*(w**(1.0d0/3.0d0)/r)1.5d0 else if(r/r0.ge.12.0d0.and.r/r0.lt.240.0d0)then maxp=5.24d01.0d7(w(1.0d0/3.0d0)/r)**1.13d0 endif !maxp冲击波到达流场中某一测点时的峰值压力,单位:帕 if(r/r0.le.30.0d0)then bt=0.45d0r0(r/r0)**0.45d01.0d-3 else bt=3.5d0r0/1500.0d0dsqrt(dlog10(r/r0)-0.9d0) endif !bt指数衰减常数,即压力从峰值maxp衰减到maxp/e所需要的时间 if(bt.le.dt)then dt=bt/10.0d0 mt=10 ! 最小时间步数 nt=floor(150.0d0bt/dt) else mt=floor(bt/dt) ! 正常时间步长计算 nt=floor(150.0d0*bt/dt) endif !有效冲击波时长 totime = nt * dt !totime: 总时长 ctime = 0.0d0 !ctime:当前时间(初始值) scr0 = 0.0004d0 !scr0:临界拉伸系数 idist = 0.0d0 !idist:初始材料点间距 distance=0.0d0 RR=0.0d0 !节点间相对距离(用于损伤判据) S=0.0d0 !应变能释放率 z=0.0d0 !节点空间坐标(z方向位置) fac = 0.0d0 !体积修正因子 radij = dx / 2.0d0 !材料点半径(基于网格划分计算) nnum = 0 !当前材料点关联家族数 cnode = 0 !当前处理的材料点编号 nlength = 0.0d0 !变形后键合长度 dforce1 = 0.0d0 !两物质点之间的近场力沿x方向的分量 dforce2 = 0.0d0 dforce3 = 0.0d0

    !初始化失败标志数组 ! 1表示未失效,0表示失效。初始假设所有键合完好 do i = 1,totnode do j = 1,maxfam fail(i,j) = 1 enddo enddo fail = 1

    !定义材料点的位置 !定义第一层物质点 底层粒子初始化 do j = 1,ndivy do k = 1,ndivx coordz = -thick/2.0d0+(dx/2.0d0) !从 z=-thick/2 开始,沿x/y方向均匀分布 coordy = -width/2.0d0+(dx/2.0d0)+(j - 1)*dx coordx = -length/2.0d0+(dx/2.0d0)+(k-1)*dx nnum = nnum+1 coord(nnum,:) = (/coordx,coordy,coordz/)! 记录坐标 enddo enddo bottomtotint = nnum ! 记录底层粒子总数

    !中间层粒子初始化 do i = 2,ndivz do j = 1,ndivy do k = 1,ndivx coordz=-thick/2.0d0+(dx/2.0d0)+(i-1)*dx !沿z轴递增,形成冰层主体 coordy=-width/2.0d0+(dx/2.0d0)+(j-1)*dx coordx=-length/2.0d0+(dx/2.0d0)+(k-1)*dx nnum=nnum + 1 coord(nnum,:) = (/coordx,coordy,coordz/) enddo enddo enddo numbingban=nnum

    !边界区域粒子初始化 !! 左侧边界 ​边界层​:在x/y方向扩展±nbnd*dx,模拟冰板边缘约束 do i = 1,ndivz do k = 1,nbnd do j = 1,ndivy coordz = -thick/2.0d0+ (dx/2.0d0)+(i-1)*dx ! coordx = -length/2.0d0-(dx/2.0d0)-(k-1)*dx coordy = -width/2.0d0+(dx/2.0d0)+(j-1)*dx nnum = nnum+1 coord(nnum,:) = (/coordx,coordy,coordz/) enddo enddo enddo

    !右侧边界(对称位置) do i = 1,ndivz do k = 1,nbnd do j = 1,ndivy coordz = -thick/2.0d0+(dx/2.0d0)+(i - 1)*dx coordx =length/2.0d0+(dx/2.0d0)+(k - 1)*dx coordy = -width/2.0d0+(dx/2.0d0)+(j - 1)*dx nnum = nnum + 1 coord(nnum,:) = (/coordx,coordy,coordz/) enddo enddo enddo

    !Material points of the boundary region – upside do i = 1,ndivz do j = 1,nbnd do k = 1,ndivx coordz = -thick/2.0d0+ (dx/2.0d0)+(i-1)*dx coordy = width/2.0d0+ (dx/2.0d0)+(j-1)*dx coordx = -length/2.0d0+ (dx/2.0d0)+(k-1)*dx nnum = nnum + 1 coord(nnum,:) = (/coordx,coordy,coordz/) enddo enddo enddo

    !Material points of the boundary region – downside do i = 1,ndivz do j = 1,nbnd do k = 1,ndivx coordz = -thick/2.0d0+(dx/2.0d0)+(i-1)*dx coordy = -width/2.0d0-(dx/2.0d0)-(j-1)*dx coordx = -length/2.0d0+(dx/2.0d0)+(k-1)*dx nnum = nnum + 1 coord(nnum,:) = (/coordx,coordy,coordz/) enddo enddo enddo

    ! 邻域搜索初始化 !Determination of material points inside the horizon of each material point确定每个物质点视界内的物质点 do i = 1,totnode if (i.eq.1) then pointfam(i,1) = 1 ! 第一个粒子的家族索引 else pointfam(i,1) = pointfam(i-1,1) + numfam(i-1,1) ! 累加家族数量 endif ! 邻域搜索循环 do j = 1,totnode idist = dsqrt((coord(j,1) - coord(i,1))**2 + (coord(j,2) - coord(i,2))**2 + (coord(j,3) - coord(i,3))**2) if (i.ne.j) then if(idist.le.delta) then numfam(i,1) = numfam(i,1) + 1 nodefam(pointfam(i,1)+numfam(i,1)-1,1) = j endif endif enddo enddo

    !Determination of surface correction factors !Loading 1 do i = 1, totnode disp(i,1) = 0.001d0 * coord(i,1) disp(i,2) = 0.0d0 disp(i,3) = 0.0d0 enddo

    do i = 1, totnode stendens(i,1) = 0.0d0 do j = 1,numfam(i,1) cnode = nodefam(pointfam(i,1)+j-1,1) idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2) nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2))**2 + (coord(cnode,3) + disp(cnode,3) - coord(i,3)- disp(i,3))**2)

        if (idist.le.delta-radij) then
            fac = 1.0d0
        elseif (idist.le.delta+radij) then
            fac = (delta+radij-idist)/(2.0d0*radij)
        else
            fac = 0.0d0
        endif   
    
        stendens(i,1) = stendens(i,1) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac  
    enddo
    !Calculation of surface correction factor in x direction 
    !by finding the ratio of the analytical strain energy density value
    !to the strain energy density value obtained from PD Theory
    fncst(i,1) = sedload1 / stendens(i,1)
    

    enddo

    !Loading 2 do i = 1, totnode disp(i,1) = 0.0d0 disp(i,2) = 0.001d0 * coord(i,2) disp(i,3) = 0.0d0 enddo

    do i = 1, totnode stendens(i,2) = 0.0d0 do j = 1,numfam(i,1) cnode = nodefam(pointfam(i,1)+j-1,1) idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2) nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2))**2+(coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2)
    if (idist.le.delta-radij) then fac = 1.0d0 elseif (idist.le.delta+radij) then fac = (delta+radij-idist)/(2.0d0*radij) else fac = 0.0d0 endif

        stendens(i,2) = stendens(i,2) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac 
    enddo
    !Calculation of surface correction factor in y direction 
    !by finding the ratio of the analytical strain energy density value
    !to the strain energy density value obtained from PD Theory
    fncst(i,2) = sedload2 / stendens(i,2)
    

    enddo

    !Loading 3 do i = 1, totnode disp(i,1) = 0.0d0 disp(i,2) = 0.0d0 disp(i,3) = 0.001d0 * coord(i,3) enddo

    do i = 1, totnode stendens(i,3) = 0.0d0 do j = 1,numfam(i,1) cnode = nodefam(pointfam(i,1)+j-1,1) idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2) nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2))**2 + (coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2) if (idist.le.delta-radij) then fac = 1.0d0 elseif (idist.le.delta+radij) then fac = (delta+radij-idist)/(2.0d0*radij) else fac = 0.0d0 endif
    stendens(i,3) = stendens(i,3) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac
    enddo !Calculation of surface correction factor in z direction !by finding the ratio of the analytical strain energy density value !to the strain energy density value obtained from PD Theory fncst(i,3) = sedload3 / stendens(i,3) enddo

    !Initialization of displacements and velocities do i = 1,totnode vel(i,1) = 0.0d0 disp(i,1)= 0.0d0 vel(i,2) = 0.0d0 disp(i,2)= 0.0d0 vel(i,3) = 0.0d0 disp(i,3)= 0.0d0 enddo

    !Stable mass vector computation do i = 1, totnode massvec(i,1) = 1.28d0dens0 massvec(i,2) = 1.28d0dens0 massvec(i,3) = 1.28d0*dens0 enddo

    ! Open file for tecplot visualization open(26,file = 'Block3D_PERI.plt') write(26,) 'Title = "Three-Dimensional Peridynamics Simulation"' write(26,) 'Variables = "X", "Y", "Z", "UX", "UY", "UZ","Damage"' !open(27,file = '位移曲线.plt') !write(27,) 'Title = "Displacement curve"' !write(27,) 'Variables = "Time Step","Time","Displacement"'

    ! 时间积分主循环 do tt = 1,nt write(,) 'tt = ', tt ctime = tt * dt ! 当前时间

    ! 冲击波传播计算 ! 球形扩展
    !Application of boundary conditions at the top edges if(RR.le.length2.0d0**(1.0d0/2.0d0)/2.0d0)then RR=dsqrt((1500.0d0ttdt)**2.0d0+3000.0d0ttdtr) else RR=length2.0d0**(1.0d0/2.0d0)/2.0d0 endif !冲击波球形扩张作用于冰板上圆形范围的半径 S=piRR**2.0d0 !冲击波球形扩张作用于冰板上圆形范围的面积

    ! 力边界条件施加
    do i = 1,bottomtotint
       if (i.eq.1) then 
          pointfamily(i,1) = 1
       else
         pointfamily(i,1) = pointfamily(i-1,1) + numfamily(i-1,1)
       endif
    
       do j = 1,bottomtotint
          distance = dsqrt((coord(j,1) -(coord(i,1)+3.0d0))**2.0d0 + (coord(j,2) - coord(i,2))**2.0d0) 
          if (i.ne.j) then
              if(distance.le.RR) then
                 numfamily(i,1) = numfamily(i,1) + 1
                 nodefamily(pointfamily(i,1)+numfamily(i,1)-1,1) = j
              endif
          endif
       enddo
     enddo
     !搜索力边界层物质点i半径为R平面范围内的family点
    
     do i = 1,bottomtotint
       summation(i,1)=abs(coord(i,1))+abs(coord(i,2))
     enddo
    
     a=1
     z=summation(1,1)
     do i = 2,bottomtotint
        if(summation(i,1).le.z)then
           z=summation(i,1)
           a=i
        endif
     enddo
    
    do i = 1,numfamily(a,1)
       cnode = nodefamily(pointfamily(a,1)+i-1,1) 
       if(tt.le.mt)then
         bforce(cnode,3) =maxp*area/vol*exp(-tt*dt/bt)
       else
         bforce(cnode,3) =maxp*area/vol*0.368d0*(bt/(tt*dt))
       endif
    enddo
    
    ! 应力计算与损伤判定
    do i = 1,totnode
        dmgpar1 = 0.0d0
        dmgpar2 = 0.0d0
        pforce(i,1) = 0.0d0
        pforce(i,2) = 0.0d0
        pforce(i,3) = 0.0d0
        ! 邻域力计算循环
        do j = 1,numfam(i,1)            
           cnode = nodefam(pointfam(i,1)+j-1,1)
            ! 距离计算
           idist = dsqrt((coord(cnode,1)- coord(i,1))**2 +(coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3)- coord(i,3))**2)
           nlength = dsqrt((coord(cnode,1)+disp(cnode,1)-coord(i,1)-disp(i,1))**2+(coord(cnode,2)+disp(cnode,2)-coord(i,2)-disp(i,2))**2 +(coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2)
    
                ! 体积修正因子
                if (idist.le.delta-radij) then
                    fac = 1.0d0
                elseif (idist.le.delta+radij) then
                    fac = (delta+radij-idist)/(2.0d0*radij)
                else
                    fac = 0.0d0
                endif
                !Determination of the surface correction between two material points
                ! 表面修正计算
                 if (dabs(coord(cnode,3) - coord(i,3)) <= 1.0d-10) then
                    if (dabs(coord(cnode,2) - coord(i,2)) <= 1.0d-10) then
    					theta = 0.0d0
    				elseif (dabs(coord(cnode,1) - coord(i,1)) <= 1.0d-10) then
    					theta = 90.0d0 * pi / 180.0d0
    				else
                        theta = datan(dabs(coord(cnode,2) - coord(i,2)) / dabs(coord(cnode,1) - coord(i,1)))
    				endif
    				phi = 90.0d0 * pi / 180.0d0
                    ! 方向余弦计算
    				scx = (fncst(i,1) + fncst(cnode,1)) / 2.0d0
    				scy = (fncst(i,2) + fncst(cnode,2)) / 2.0d0
    				scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
                    scr=1.0d0/(((dcos(theta)*dsin(phi))**2/(scx)**2)+((dsin(theta)*dsin(phi))**2/(scy)**2)+((dcos(phi))**2/(scz)**2))
    				scr = dsqrt(scr)
                elseif (dabs(coord(cnode,1)-coord(i,1)) <= 1.0d-10.and.dabs(coord(cnode,2)-coord(i,2)) <= 1.0d-10) then
    				scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
    			    scr = scz
                else
                    theta = datan(dabs(coord(cnode,2) - coord(i,2)) / dabs(coord(cnode,1) - coord(i,1)))
    				phi = dacos(dabs(coord(cnode,3) - coord(i,3)) / idist)
    				scx = (fncst(i,1) + fncst(cnode,1)) / 2.0d0
    				scy = (fncst(i,2) + fncst(cnode,2)) / 2.0d0
    				scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
                    scr=1.0d0/(((dcos(theta)*dsin(phi))**2/(scx)**2)+((dsin(theta)*dsin(phi))**2/(scy)**2)+((dcos(phi))**2/(scz)**2))
    				scr = dsqrt(scr)
                endif                
       
                if (fail(i,j) .eq. 1) then
                  !Calculation of the peridynamic force in x, y and z directions 
                  !acting on a material point i due to a material point j
                  dforce1 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1)) / nlength 
                  dforce2 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2)) / nlength
                  dforce3 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3)) / nlength
                else
                  dforce1 = 0.0d0
                  dforce2 = 0.0d0
                  dforce3 = 0.0d0
                endif
    
     !Definition of a no-fail zone,nlength是变形后键长,idist是原始距离
                if((nlength - idist).le.1.0d-10) then
                   if((idist - nlength) / idist.le.5.0d0*scr0)then
                      fail(i,j)=1
                   else
                      fail(i,j)=0
                   endif
                else
                   if((nlength - idist) / idist.le.scr0)then
                      fail(i,j)=1
                   else
                      fail(i,j)=0  ! 键断裂
                   endif
                endif 
                ! 更新力数组
                pforce(i,1) = pforce(i,1) + dforce1      
                pforce(i,2) = pforce(i,2) + dforce2  
                pforce(i,3) = pforce(i,3) + dforce3  
                ! 损伤参数累积
                dmgpar1 = dmgpar1 + fail(i,j) * vol * fac
                dmgpar2 = dmgpar2 + vol * fac 
        enddo
        ! 损伤计算
        dmg(i,1) = 1.0d0 - dmgpar1 / dmgpar2
    enddo
    

    ! 时间积分更新 do i = 1,totnode ! 速度更新 vel(i,1) = vel(i,1)+ dt*(pforce(i,1) + bforce(i,1)) / massvec(i,1) vel(i,2) = vel(i,2)+ dt*(pforce(i,2) + bforce(i,2)) / massvec(i,2) vel(i,3) = vel(i,3)+ dt*(pforce(i,3) + bforce(i,3)) / massvec(i,3) ! 位移更新 disp(i,1) = disp(i,1) + vel(i,1) * dt disp(i,2) = disp(i,2) + vel(i,2) * dt disp(i,3) = disp(i,3) + vel(i,3) * dt enddo

    do i=1,bottomtotint
       numfamily(i,1)=0
       pointfamily(i,1)=0
       nodefamily(i,1)=0
       summation(i,1)=0
       summ(i,1) = 0
    enddo  
    ! 结果输出    
    

    !printing results to an output file if(mod(tt,10) == 0 ) then write(,) '*** current time step is', tt write(26,) 'zone' ! Tecplot分区标识 ! write(27,) 'zone' do i = 1, numbingban ! 输出格式:坐标+位移+速度+损伤 write(26,444) coord(i,1)+disp(i,1), coord(i,2)+disp(i,2), coord(i,3)+disp(i,3), disp(i,1), disp(i,2), disp(i,3), dmg(i,1) enddo ! write(27,444) ctime,disp(b,3) call flush(26) endif enddo

    close(26)

    111 format(e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5) 222 format(e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5) 333 format(i10,3x,e12.5,3x,e12.5,3x,e12.5)
    444 format(3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5)

    end program main

    这是一段fortran程序,内容是关于单炸点水下爆炸破冰,现在我已经通过修改让炸点实现了偏移。现在我想将炸点修改成多炸点,请你在原炸点对称位置添加一个炸点,简化考虑冲击波的联合考虑,在原程序结构中修改,最后输出完整的程序,并以中文注释

  2. Perplexity Assistant

    水下多炸点爆炸破冰模拟程序修改方案

    根据您的要求,我将修改原程序,在原炸点对称位置添加一个炸点,并考虑冲击波的联合作用。以下是完整的修改后程序,主要变更部分已用中文注释标出:

    program main
    
    implicit none
    
    integer ndivx, ndivy, ndivz, totnode, nt, maxfam, nnum, cnode, i, j, k, tt, nbnd, bottomtotint,mt,a,b,numbingban
    integer a2, mt2 ! 新增变量,用于第二个炸点
    parameter(ndivx = 100)
    parameter(ndivy = 100)
    parameter(ndivz = 3)
    parameter(nbnd = 3)
    parameter (totnode = (ndivx*ndivy+ndivx*nbnd*4)* ndivz)
    parameter(maxfam = 5000)
    
    real *8 length, width, thick, dx, delta, dens, emod, pratio, area, vol, bc,crlength,maxp,w,r,kk,bt,r0,RR,S,distance,z,v,dens0,dens1,H,H1,H2
    real *8 sedload1, sedload2, sedload3, dt, totime, ctime, idist, fac, radij, nlength, dforce1, dforce2, dforce3 
    real *8 pi, tmpdx, tmpvol, tmpcx, tmpux, tmpcy, tmpuy, tmpcz, tmpuz, dmgpar1, dmgpar2, theta, phi 
    real *8 scr, scx, scy, scz, coordx, coordy, coordz, cn, cn1, cn2, appres, alpha, dtemp
    real *8 scr0
    ! 新增第二炸点参数
    real *8 H_2, H1_2, H2_2, r_2, maxp_2, bt_2, RR_2, S_2, distance_2, combined_force
    
    real *8 coord(totnode,3), pforce(totnode,3), pforceold(totnode,3), bforce(totnode,3), stendens(totnode,3)
    real *8 fncst(totnode,3), fncstold(totnode,3), disp(totnode,3)
    real *8 vel(totnode,3), velhalfold(totnode,3), velhalf(totnode,3), andisp(totnode,3)
    real *8 acc(totnode,3), massvec(totnode,3), dmg(totnode,1),summation(totnode,1),summ(totnode,1)
    integer numfam(totnode,1),numfamily(totnode,1), pointfam(totnode,1), pointfamily(totnode,1),nodefam(100000000,1),nodefamily(100000000,1), alflag(totnode,1), fail(totnode,maxfam)
    ! 新增第二炸点的家族数组
    integer numfamily_2(totnode,1), pointfamily_2(totnode,1), nodefamily_2(100000000,1)
    
    pi = dacos(-1.0d0)
    
    do i = 1, totnode 
        !coord: Material point locations, 1:x-coord, 2:y-coord, 3:z-coord
        coord(i,1) = 0.0d0
        coord(i,2) = 0.0d0
        coord(i,3) = 0.0d0
        !numfam:初始化家族关系
        numfam(i,1) = 0 ! 家族成员数量
        numfamily(i,1) = 0  ! 家族索引
        numfamily_2(i,1) = 0  ! 第二炸点家族索引(新增)
        summation(i,1) = 0.0d0  ! 累计量
        summ(i,1) = 0.0d0
        !pointfam:初始化点家族关系
        pointfam(i,1) = 0 
        pointfamily(i,1) = 0
        pointfamily_2(i,1) = 0  ! 第二炸点点家族关系(新增)
        !pforce:初始化力数组
        pforce(i,1:3) = 0.0d0  ! 总力
        pforceold(i,1:3) = 0.0d0  ! 上一步力
        !bforce: 初始化体力数组
        bforce(i,1:3) = 0.0d0
        !stendens: 初始化应变能密度 1:loading 1, 2:loading 2, 3:loading 3
        stendens(i,1:3) = 0.0d0
        !fncst: 初始物质点表面修正系数, 1:loading 1, 2:loading 2, 3:loading 3
        fncst(i,1:3) = 1.0d0
        fncstold(i,1:3) = 1.0d0  
        !disp: 初始化位移数组
        disp(i,1:3) = 0.0d0
        !vel: 初始化速度数组
        vel(i,1:3) = 0.0d0
        velhalfold(i,1:3) = 0.0d0
        velhalf(i,1:3) = 0.0d0
        !acc:初始化加速度数组
        acc(i,1:3) = 0.0d0
        !massvec: 初始化质量向量,自适应动态松弛的质量向量
        massvec(i,1:3) = 0.0d0
        !andisp:初始化分析位移
        andisp(i,1:3) = 0.0d0
        ! 初始无失效  
        fail(i,1:maxfam) = 1  
        !dmg: 初始化损伤数组
        dmg(i,1) = 0.0d0
    enddo
    ! 初始化家族关系数组
    do i = 1, totnode
        nodefam(i,1) = 0
        nodefamily(i,1) = 0
        nodefamily_2(i,1) = 0  ! 初始化第二炸点的家族数组(新增)
    enddo
    
    ! 几何参数设置
    !length: 结构总长度
    length = 16.0d0
    !width: 结构总宽度
    width = 16.0d0
    !dx: 材料点之间的间距
    dx = length / ndivx
    !thick: 总厚度(基于单元尺寸)
    thick = ndivz*dx 
    
    ! 动态参数计算
    delta = 3.015d0*dx !影响半径
    dens0 = 900.0d0 !冰的密度
    dens1 = 1000.0d0 !水的密度
    emod = 0.3d9 ! 弹性模量
    bc = 12.0d0 * emod / (pi * (delta**4.0d0))!bc: 键刚度系数
    pratio = 1.0d0 / 4.0d0 !pratio: 泊松比
    dtemp = 0.0d0 !dtemp:温度变化量
    area = dx * dx !单元横截面积
    vol = area * dx !单元体积
    sedload1 = 0.6d0 * emod * 1.0d-6 !沿x轴一个物质点的应变能量密度   
    sedload2 = 0.6d0 * emod * 1.0d-6
    sedload3 = 0.6d0 * emod * 1.0d-6
    
    ! 时间步长计算
    !dt: Time interval约为1微秒
    dt = 0.8d0 * dsqrt(2.0d0*dens0*dx/(pi*delta**2.0d0*dx*bc))
    
    ! 炸药参数设置
    !炸药位于水面(r = H - dens0*thick/dens1),通过冲击波参数 RR 扩展
    w=5.0d0 !炸药质量,单位:kg
    H1=1.5d0  ! 第一炸点 x 方向偏移
    H2=3.0d0  ! 第一炸点 y 方向偏移
    H=SQRT(H1**2+H2**2) !测点到炸药中心的距离,单位:m
    r=H-dens0*thick/dens1 !冰底面到炸药中心的距离,单位:m
    r0=(3.0d0*w/(4.0d0*pi*1600.0d0))**(1.0d0/3.0d0) !球形药包半径,单位:m
    
    ! 新增第二炸点参数设置(对称位置)
    H1_2 = -H1  ! 第二炸点x方向偏移(与第一炸点对称)
    H2_2 = -H2  ! 第二炸点y方向偏移(与第一炸点对称)
    H_2 = SQRT(H1_2**2+H2_2**2)  ! 第二炸点到参考点距离
    r_2 = H_2-dens0*thick/dens1  ! 第二炸点到冰底面的距离
    
    ! 冲击波参数计算(两个炸点使用相同的计算方法)
    if(r/r0.ge.6.0d0.and.r/r0.lt.12.0d0)then
       maxp=4.41d0*1.0d7*(w**(1.0d0/3.0d0)/r)**1.5d0
    else if(r/r0.ge.12.0d0.and.r/r0.lt.240.0d0)then
       maxp=5.24d0*1.0d7*(w**(1.0d0/3.0d0)/r)**1.13d0
    endif
    !maxp冲击波到达流场中某一测点时的峰值压力,单位:帕
    
    ! 第二炸点冲击波峰值压力计算
    if(r_2/r0.ge.6.0d0.and.r_2/r0.lt.12.0d0)then
       maxp_2=4.41d0*1.0d7*(w**(1.0d0/3.0d0)/r_2)**1.5d0
    else if(r_2/r0.ge.12.0d0.and.r_2/r0.lt.240.0d0)then
       maxp_2=5.24d0*1.0d7*(w**(1.0d0/3.0d0)/r_2)**1.13d0
    endif
    
    if(r/r0.le.30.0d0)then
       bt=0.45d0*r0*(r/r0)**0.45d0*1.0d-3
    else
       bt=3.5d0*r0/1500.0d0*dsqrt(dlog10(r/r0)-0.9d0)
    endif
    !bt指数衰减常数,即压力从峰值maxp衰减到maxp/e所需要的时间
    
    ! 第二炸点衰减常数计算
    if(r_2/r0.le.30.0d0)then
       bt_2=0.45d0*r0*(r_2/r0)**0.45d0*1.0d-3
    else
       bt_2=3.5d0*r0/1500.0d0*dsqrt(dlog10(r_2/r0)-0.9d0)
    endif
    
    ! 使用两个炸点中衰减较小的值确定时间步长
    if(bt.le.bt_2)then
       if(bt.le.dt)then
          dt=bt/10.0d0
          mt=10 ! 最小时间步数
          nt=floor(150.0d0*bt/dt)
       else
          mt=floor(bt/dt) ! 正常时间步长计算
          nt=floor(150.0d0*bt/dt)
       endif
    else
       if(bt_2.le.dt)then
          dt=bt_2/10.0d0
          mt=10 ! 最小时间步数
          nt=floor(150.0d0*bt_2/dt)
       else
          mt=floor(bt_2/dt) ! 正常时间步长计算
          nt=floor(150.0d0*bt_2/dt)
       endif
    endif
    mt2 = floor(bt_2/dt) ! 第二炸点的时间步长
    
    !有效冲击波时长
    totime = nt * dt !totime: 总时长
    ctime = 0.0d0 !ctime:当前时间(初始值)
    scr0 = 0.0004d0 !scr0:临界拉伸系数
    idist = 0.0d0 !idist:初始材料点间距
    distance=0.0d0
    distance_2=0.0d0 ! 第二炸点距离计算变量
    RR=0.0d0 !节点间相对距离(用于损伤判据)
    RR_2=0.0d0 ! 第二炸点范围参数
    S=0.0d0 !应变能释放率
    S_2=0.0d0 ! 第二炸点应变能释放率
    z=0.0d0 !节点空间坐标(z方向位置)
    fac = 0.0d0 !体积修正因子
    radij = dx / 2.0d0 !材料点半径(基于网格划分计算)
    nnum = 0 !当前材料点关联家族数
    cnode = 0 !当前处理的材料点编号
    nlength  = 0.0d0 !变
    
  3. User

    请你继续输出完整程序

  4. Perplexity Assistant
    nlength  = 0.0d0 !变形后键合长度
    dforce1 = 0.0d0 !两物质点之间的近场力沿x方向的分量
    dforce2 = 0.0d0
    dforce3 = 0.0d0
    
    !初始化失败标志数组
    ! 1表示未失效,0表示失效。初始假设所有键合完好
    do i = 1,totnode
        do j = 1,maxfam
            fail(i,j) = 1
        enddo
    enddo
    fail = 1
    
    !定义材料点的位置
    !定义第一层物质点 底层粒子初始化
    do j = 1,ndivy
       do k = 1,ndivx
          coordz = -thick/2.0d0+(dx/2.0d0) !从 z=-thick/2 开始,沿x/y方向均匀分布
          coordy = -width/2.0d0+(dx/2.0d0)+(j - 1)*dx
          coordx = -length/2.0d0+(dx/2.0d0)+(k-1)*dx
          nnum = nnum+1
          coord(nnum,:) = (/coordx,coordy,coordz/)! 记录坐标
       enddo
    enddo
    bottomtotint = nnum ! 记录底层粒子总数
    
    !中间层粒子初始化
    do i = 2,ndivz
        do j = 1,ndivy
            do k = 1,ndivx
                coordz=-thick/2.0d0+(dx/2.0d0)+(i-1)*dx !沿z轴递增,形成冰层主体
                coordy=-width/2.0d0+(dx/2.0d0)+(j-1)*dx
                coordx=-length/2.0d0+(dx/2.0d0)+(k-1)*dx
                nnum=nnum + 1
                coord(nnum,:) = (/coordx,coordy,coordz/)
            enddo
        enddo
    enddo
    numbingban=nnum
    
    !边界区域粒子初始化
    !! 左侧边界 ​边界层​:在x/y方向扩展±nbnd*dx,模拟冰板边缘约束
    do i = 1,ndivz
        do k = 1,nbnd
            do j = 1,ndivy
                coordz = -thick/2.0d0+ (dx/2.0d0)+(i-1)*dx !
                coordx = -length/2.0d0-(dx/2.0d0)-(k-1)*dx
                coordy = -width/2.0d0+(dx/2.0d0)+(j-1)*dx
                nnum = nnum+1
                coord(nnum,:) = (/coordx,coordy,coordz/)
            enddo
        enddo
    enddo
    
    !右侧边界(对称位置)
    do i = 1,ndivz
        do k = 1,nbnd
            do j = 1,ndivy
                coordz = -thick/2.0d0+(dx/2.0d0)+(i - 1)*dx
                coordx =length/2.0d0+(dx/2.0d0)+(k - 1)*dx
                coordy = -width/2.0d0+(dx/2.0d0)+(j - 1)*dx
                nnum = nnum + 1
                coord(nnum,:) = (/coordx,coordy,coordz/)
            enddo
        enddo
    enddo
    
    !Material points of the boundary region – upside
    do i = 1,ndivz
        do j = 1,nbnd
            do k = 1,ndivx
                coordz = -thick/2.0d0+ (dx/2.0d0)+(i-1)*dx
                coordy =  width/2.0d0+ (dx/2.0d0)+(j-1)*dx
                coordx = -length/2.0d0+ (dx/2.0d0)+(k-1)*dx
                nnum = nnum + 1
                coord(nnum,:) = (/coordx,coordy,coordz/)
            enddo
        enddo
    enddo
    
    !Material points of the boundary region – downside
    do i = 1,ndivz
        do j = 1,nbnd
            do k = 1,ndivx
                coordz = -thick/2.0d0+(dx/2.0d0)+(i-1)*dx
                coordy = -width/2.0d0-(dx/2.0d0)-(j-1)*dx
                coordx = -length/2.0d0+(dx/2.0d0)+(k-1)*dx
                nnum = nnum + 1
                coord(nnum,:) = (/coordx,coordy,coordz/)
            enddo
        enddo
    enddo
    
    ! 邻域搜索初始化
    !Determination of material points inside the horizon of each material point确定每个物质点视界内的物质点
    do i = 1,totnode
        if (i.eq.1) then 
            pointfam(i,1) = 1 ! 第一个粒子的家族索引
        else
            pointfam(i,1) = pointfam(i-1,1) + numfam(i-1,1) ! 累加家族数量
        endif
        ! 邻域搜索循环
        do j = 1,totnode
            idist = dsqrt((coord(j,1) - coord(i,1))**2 + (coord(j,2) - coord(i,2))**2 + (coord(j,3) - coord(i,3))**2)
            if (i.ne.j) then
                if(idist.le.delta) then
                    numfam(i,1) = numfam(i,1) + 1
                    nodefam(pointfam(i,1)+numfam(i,1)-1,1) = j
                endif
            endif
        enddo
    enddo
    
    !Determination of surface correction factors 
    !Loading 1
    do i = 1, totnode
        disp(i,1) = 0.001d0 * coord(i,1)
        disp(i,2) = 0.0d0
        disp(i,3) = 0.0d0
    enddo
       
    do i = 1, totnode
        stendens(i,1) = 0.0d0
        do j = 1,numfam(i,1)
            cnode = nodefam(pointfam(i,1)+j-1,1)
            idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2)
            nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2))**2 + (coord(cnode,3) + disp(cnode,3) - coord(i,3)- disp(i,3))**2)
            
            if (idist.le.delta-radij) then
                fac = 1.0d0
            elseif (idist.le.delta+radij) then
                fac = (delta+radij-idist)/(2.0d0*radij)
            else
                fac = 0.0d0
            endif   
    
            stendens(i,1) = stendens(i,1) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac  
        enddo
        !Calculation of surface correction factor in x direction 
        !by finding the ratio of the analytical strain energy density value
        !to the strain energy density value obtained from PD Theory
        fncst(i,1) = sedload1 / stendens(i,1)
    enddo
    
    !Loading 2
    do i = 1, totnode
        disp(i,1) = 0.0d0
        disp(i,2) = 0.001d0 * coord(i,2)
        disp(i,3) = 0.0d0
    enddo
    
    do i = 1, totnode
        stendens(i,2) = 0.0d0
        do j = 1,numfam(i,1)
            cnode = nodefam(pointfam(i,1)+j-1,1)
            idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2)
            nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2)  - coord(i,2) - disp(i,2))**2+(coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2)                                    
            if (idist.le.delta-radij) then
                fac = 1.0d0
            elseif (idist.le.delta+radij) then
                fac = (delta+radij-idist)/(2.0d0*radij)
            else
                fac = 0.0d0
            endif 
    
            stendens(i,2) = stendens(i,2) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac 
        enddo
        !Calculation of surface correction factor in y direction 
        !by finding the ratio of the analytical strain energy density value
        !to the strain energy density value obtained from PD Theory
        fncst(i,2) = sedload2 / stendens(i,2)
    enddo
       
    !Loading 3
    do i = 1, totnode
        disp(i,1) = 0.0d0
        disp(i,2) = 0.0d0
        disp(i,3) = 0.001d0 * coord(i,3)
    enddo
    
    do i = 1, totnode
        stendens(i,3) = 0.0d0
        do j = 1,numfam(i,1)
            cnode = nodefam(pointfam(i,1)+j-1,1)
            idist = dsqrt((coord(cnode,1) - coord(i,1))**2 + (coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3) - coord(i,3))**2)
            nlength = dsqrt((coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1))**2 + (coord(cnode,2) + disp(cnode,2)  - coord(i,2) - disp(i,2))**2 + (coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2)
            if (idist.le.delta-radij) then
                fac = 1.0d0
            elseif (idist.le.delta+radij) then
                fac = (delta+radij-idist)/(2.0d0*radij)
            else
                fac = 0.0d0
            endif      
            stendens(i,3) = stendens(i,3) + 0.5d0 * 0.5d0 * bc * ((nlength - idist) / idist)**2 * idist * vol * fac  
        enddo
        !Calculation of surface correction factor in z direction 
        !by finding the ratio of the analytical strain energy density value
        !to the strain energy density value obtained from PD Theory
        fncst(i,3) = sedload3 / stendens(i,3)
    enddo
           
    !Initialization of displacements and velocities
    do i = 1,totnode
        vel(i,1) = 0.0d0
        disp(i,1)= 0.0d0 
        vel(i,2) = 0.0d0
        disp(i,2)= 0.0d0 
        vel(i,3) = 0.0d0
        disp(i,3)= 0.0d0 
    enddo
    
    !Stable mass vector computation
    do i = 1, totnode
       massvec(i,1) = 1.28d0*dens0
       massvec(i,2) = 1.28d0*dens0
       massvec(i,3) = 1.28d0*dens0
    enddo
    
    ! Open file for tecplot visualization
    open(26,file = 'Block3D_PERI.plt')
    write(26,*) 'Title = "Three-Dimensional Peridynamics Simulation"'
    write(26,*) 'Variables = "X", "Y", "Z", "UX", "UY", "UZ","Damage"'
    !open(27,file = '位移曲线.plt')
    !write(27,*) 'Title = "Displacement curve"'
    !write(27,*) 'Variables = "Time Step","Time","Displacement"'
    
    ! 时间积分主循环
    do tt = 1,nt
       write(*,*) 'tt = ', tt
       ctime = tt * dt ! 当前时间
       
       ! 冲击波传播计算 - 第一炸点 
       if(RR.le.length*2.0d0**(1.0d0/2.0d0)/2.0d0)then
           RR=dsqrt((1500.0d0*tt*dt)**2.0d0+3000.0d0*tt*dt*r)
       else
           RR=length*2.0d0**(1.0d0/2.0d0)/2.0d0
       endif
       !冲击波球形扩张作用于冰板上圆形范围的半径
       S=pi*RR**2.0d0
       !冲击波球形扩张作用于冰板上圆形范围的面积
       
       ! 冲击波传播计算 - 第二炸点(新增)
       if(RR_2.le.length*2.0d0**(1.0d0/2.0d0)/2.0d0)then
           RR_2=dsqrt((1500.0d0*tt*dt)**2.0d0+3000.0d0*tt*dt*r_2)
       else
           RR_2=length*2.0d0**(1.0d0/2.0d0)/2.0d0
       endif
       !第二炸点冲击波球形扩张作用于冰板上圆形范围的半径
       S_2=pi*RR_2**2.0d0
       !第二炸点冲击波球形扩张作用于冰板上圆形范围的面积
       
       ! 力边界条件施加 - 第一炸点
       do i = 1,bottomtotint
           if (i.eq.1) then 
              pointfamily(i,1) = 1
           else
             pointfamily(i,1) = pointfamily(i-1,1) + numfamily(i-1,1)
           endif
        
           do j = 1,bottomtotint
              distance = dsqrt((coord(j,1) -(coord(i,1)+H1))**2.0d0 + (coord(j,2) - (coord(i,2)+H2))**2.0d0) 
              if (i.ne.j) then
                  if(distance.le.RR) then
                     numfamily(i,1) = numfamily(i,1) + 1
                     nodefamily(pointfamily(i,1)+numfamily(i,1)-1,1) = j
                  endif
              endif
           enddo
       enddo
       !搜索力边界层物质点i半径为R平面范围内的family点
       
       ! 力边界条件施加 - 第二炸点(新增)
       do i = 1,bottomtotint
           if (i.eq.1) then 
              pointfamily_2(i,1) = 1
           else
             pointfamily_2(i,1) =
    
  5. User

    请你继续输出完整程序

  6. Perplexity Assistant
       ! 力边界条件施加 - 第二炸点(新增)
       do i = 1,bottomtotint
           if (i.eq.1) then 
              pointfamily_2(i,1) = 1
           else
             pointfamily_2(i,1) = pointfamily_2(i-1,1) + numfamily_2(i-1,1)
           endif
        
           do j = 1,bottomtotint
              ! 计算到第二炸点的距离(注意第二炸点位于对称位置)
              distance_2 = dsqrt((coord(j,1) -(coord(i,1)+H1_2))**2.0d0 + (coord(j,2) - (coord(i,2)+H2_2))**2.0d0) 
              if (i.ne.j) then
                  if(distance_2.le.RR_2) then
                     numfamily_2(i,1) = numfamily_2(i,1) + 1
                     nodefamily_2(pointfamily_2(i,1)+numfamily_2(i,1)-1,1) = j
                  endif
              endif
           enddo
       enddo
       !搜索第二炸点力边界层物质点i半径为R_2平面范围内的family点
         
       do i = 1,bottomtotint
           summation(i,1)=abs(coord(i,1))+abs(coord(i,2))
       enddo
    
       ! 寻找第一炸点最近的节点
       a=1
       z=summation(1,1)
       do i = 2,bottomtotint
          if(summation(i,1).le.z)then
             z=summation(i,1)
             a=i
          endif
       enddo
       
       ! 寻找第二炸点最近的节点(新增)
       a2=1
       z=abs(coord(1,1)-H1_2)+abs(coord(1,2)-H2_2)
       do i = 2,bottomtotint
          if(abs(coord(i,1)-H1_2)+abs(coord(i,2)-H2_2).le.z)then
             z=abs(coord(i,1)-H1_2)+abs(coord(i,2)-H2_2)
             a2=i
          endif
       enddo
        
       ! 第一炸点冲击波力加载
       do i = 1,numfamily(a,1)
           cnode = nodefamily(pointfamily(a,1)+i-1,1) 
           if(tt.le.mt)then
             bforce(cnode,3) = maxp*area/vol*exp(-tt*dt/bt)
           else
             bforce(cnode,3) = maxp*area/vol*0.368d0*(bt/(tt*dt))
           endif
       enddo
    
       ! 第二炸点冲击波力加载(新增)
       do i = 1,numfamily_2(a2,1)
           cnode = nodefamily_2(pointfamily_2(a2,1)+i-1,1) 
           ! 检查节点是否同时受到两个炸点影响
           combined_force = 0.0d0
           
           ! 计算第二炸点产生的力
           if(tt.le.mt2)then
             combined_force = maxp_2*area/vol*exp(-tt*dt/bt_2)
           else
             combined_force = maxp_2*area/vol*0.368d0*(bt_2/(tt*dt))
           endif
           
           ! 将力累加到已有的力上(简化的叠加原则)
           bforce(cnode,3) = bforce(cnode,3) + combined_force
       enddo
    
        ! 应力计算与损伤判定
        do i = 1,totnode
            dmgpar1 = 0.0d0
            dmgpar2 = 0.0d0
            pforce(i,1) = 0.0d0
            pforce(i,2) = 0.0d0
            pforce(i,3) = 0.0d0
            ! 邻域力计算循环
            do j = 1,numfam(i,1)            
               cnode = nodefam(pointfam(i,1)+j-1,1)
                ! 距离计算
               idist = dsqrt((coord(cnode,1)- coord(i,1))**2 +(coord(cnode,2) - coord(i,2))**2 + (coord(cnode,3)- coord(i,3))**2)
               nlength = dsqrt((coord(cnode,1)+disp(cnode,1)-coord(i,1)-disp(i,1))**2+(coord(cnode,2)+disp(cnode,2)-coord(i,2)-disp(i,2))**2 +(coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3))**2)
    
                    ! 体积修正因子
                    if (idist.le.delta-radij) then
                        fac = 1.0d0
                    elseif (idist.le.delta+radij) then
                        fac = (delta+radij-idist)/(2.0d0*radij)
                    else
                        fac = 0.0d0
                    endif
                    !Determination of the surface correction between two material points
                    ! 表面修正计算
                     if (dabs(coord(cnode,3) - coord(i,3)) &lt;= 1.0d-10) then
                        if (dabs(coord(cnode,2) - coord(i,2)) &lt;= 1.0d-10) then
    						theta = 0.0d0
    					elseif (dabs(coord(cnode,1) - coord(i,1)) &lt;= 1.0d-10) then
    						theta = 90.0d0 * pi / 180.0d0
    					else
                            theta = datan(dabs(coord(cnode,2) - coord(i,2)) / dabs(coord(cnode,1) - coord(i,1)))
    					endif
    					phi = 90.0d0 * pi / 180.0d0
                        ! 方向余弦计算
    					scx = (fncst(i,1) + fncst(cnode,1)) / 2.0d0
    					scy = (fncst(i,2) + fncst(cnode,2)) / 2.0d0
    					scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
                        scr=1.0d0/(((dcos(theta)*dsin(phi))**2/(scx)**2)+((dsin(theta)*dsin(phi))**2/(scy)**2)+((dcos(phi))**2/(scz)**2))
    					scr = dsqrt(scr)
                    elseif (dabs(coord(cnode,1)-coord(i,1)) &lt;= 1.0d-10.and.dabs(coord(cnode,2)-coord(i,2)) &lt;= 1.0d-10) then
    					scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
    				    scr = scz
                    else
                        theta = datan(dabs(coord(cnode,2) - coord(i,2)) / dabs(coord(cnode,1) - coord(i,1)))
    					phi = dacos(dabs(coord(cnode,3) - coord(i,3)) / idist)
    					scx = (fncst(i,1) + fncst(cnode,1)) / 2.0d0
    					scy = (fncst(i,2) + fncst(cnode,2)) / 2.0d0
    					scz = (fncst(i,3) + fncst(cnode,3)) / 2.0d0
                        scr=1.0d0/(((dcos(theta)*dsin(phi))**2/(scx)**2)+((dsin(theta)*dsin(phi))**2/(scy)**2)+((dcos(phi))**2/(scz)**2))
    					scr = dsqrt(scr)
                    endif                
           
                    if (fail(i,j) .eq. 1) then
                      !Calculation of the peridynamic force in x, y and z directions 
                      !acting on a material point i due to a material point j
                      dforce1 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,1) + disp(cnode,1) - coord(i,1) - disp(i,1)) / nlength 
                      dforce2 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,2) + disp(cnode,2) - coord(i,2) - disp(i,2)) / nlength
                      dforce3 = bc * ((nlength - idist) / idist ) * vol * scr * fac * (coord(cnode,3) + disp(cnode,3) - coord(i,3) - disp(i,3)) / nlength
                    else
                      dforce1 = 0.0d0
                      dforce2 = 0.0d0
                      dforce3 = 0.0d0
                    endif
    
         !Definition of a no-fail zone,nlength是变形后键长,idist是原始距离
                    if((nlength - idist).le.1.0d-10) then
                       if((idist - nlength) / idist.le.5.0d0*scr0)then
                          fail(i,j)=1
                       else
                          fail(i,j)=0
                       endif
                    else
                       if((nlength - idist) / idist.le.scr0)then
                          fail(i,j)=1
                       else
                          fail(i,j)=0  ! 键断裂
                       endif
                    endif 
                    ! 更新力数组
                    pforce(i,1) = pforce(i,1) + dforce1      
                    pforce(i,2) = pforce(i,2) + dforce2  
                    pforce(i,3) = pforce(i,3) + dforce3  
                    ! 损伤参数累积
                    dmgpar1 = dmgpar1 + fail(i,j) * vol * fac
                    dmgpar2 = dmgpar2 + vol * fac 
            enddo
            ! 损伤计算
            dmg(i,1) = 1.0d0 - dmgpar1 / dmgpar2
        enddo
       
    ! 时间积分更新
        do i = 1,totnode
             ! 速度更新
           vel(i,1) = vel(i,1)+ dt*(pforce(i,1) + bforce(i,1)) / massvec(i,1)
           vel(i,2) = vel(i,2)+ dt*(pforce(i,2) + bforce(i,2)) / massvec(i,2)
           vel(i,3) = vel(i,3)+ dt*(pforce(i,3) + bforce(i,3)) / massvec(i,3)
            ! 位移更新
           disp(i,1) = disp(i,1) + vel(i,1) * dt
           disp(i,2) = disp(i,2) + vel(i,2) * dt
           disp(i,3) = disp(i,3) + vel(i,3) * dt
        enddo
        
        ! 重置第一炸点相关数组
        do i=1,bottomtotint
           numfamily(i,1)=0
           pointfamily(i,1)=0
           nodefamily(i,1)=0
           summation(i,1)=0
           summ(i,1) = 0
        enddo
        
        ! 重置第二炸点相关数组(新增)
        do i=1,bottomtotint
           numfamily_2(i,1)=0
           pointfamily_2(i,1)=0
           nodefamily_2(i,1)=0
        enddo
        
        ! 结果输出    
       !printing results to an output file
       if(mod(tt,10) == 0 ) then
         write(*,*) '*** current time step is', tt 
         write(26,*) 'zone' ! Tecplot分区标识
    !     write(27,*) 'zone'
         do i = 1, numbingban
            ! 输出格式:坐标+位移+速度+损伤
         	write(26,444) coord(i,1)+disp(i,1), coord(i,2)+disp(i,2), coord(i,3)+disp(i,3), disp(i,1), disp(i,2), disp(i,3), dmg(i,1)
         enddo
    !     write(27,444) ctime,disp(b,3)
         call flush(26)
       endif
    enddo
    
    close(26)
    
    111 format(e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5)
    222 format(e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5)
    333 format(i10,3x,e12.5,3x,e12.5,3x,e12.5)      
    444 format(3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5,3x,e12.5)  
    
    end program main
    

    多炸点水下爆炸破冰模拟程序说明

    上述代码实现了双炸点水下爆炸破冰的模拟。主要修改内容如下:

    1. 新增第二炸点参数:

      • 增加了与第二炸点相关的变量(H1_2, H2_2, H_2, r_2, maxp_2, bt_2, RR_2, S_2等)
      • 在原炸点对称位置建立第二炸点,坐标为(-H1, -H2)
    2. 冲击波参数计算:

      • 分别计算两个炸点的冲击波峰值压力和衰减常数
      • 选择两个炸点中较小的衰减常数来确定时间步长,保证数值稳定性
    3. 双炸点影响域搜索:

      • 为第二炸点新增家族数组(numfamily_2, pointfamily_2, nodefamily_2)
      • 分别搜索两个炸点影响下的材料点
    4. 冲击波力叠加作用:

      • 搜索每个炸点最近的节点(a和a2)
      • 对每个炸点影响范围内的材料点施加冲击波力
      • 当节点同时受到两个炸点影响时,采用简单叠加原则计算合力
    5. 结果输出与处理:

      • 在每个时间步计算位移和损伤
      • 每隔10个时间步输出结果

    该程序可以模拟双炸点水下爆炸对冰层的协同破坏效果,更贴近实际应用场景。通过改变两个炸点的位置和爆炸参数,可以研究不同布设方案的爆破效果。

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.