zte blade a35 lite how to hard reset
- User
zte blade a35 lite how to hard reset
Assistant
Okay, here's how to hard reset your ZTE Blade A35 Lite.
Important Note: A hard reset will erase all personal data, apps, and settings on your phone, restoring it to its factory default state.
Steps:
- Power off your device: Make sure your ZTE Blade A35 Lite is completely turned off.
- Enter Recovery Mode:
- Press and hold the Power button and the Volume Up button simultaneously.
- Keep holding both buttons until the ZTE logo appears.
- Release the Power button but continue holding the Volume Up button until the Recovery Mode screen appears.
- Navigate and Select "Wipe data/factory reset":
- Use the Volume Up and Volume Down buttons to navigate through the options in the Recovery Mode menu.
- Highlight the "Wipe data/factory reset" option.
- Press the Power button to select it.
- Confirm Factory Reset:
- Use the Volume Down button to highlight "Factory data reset".
- Press the Power button to confirm and begin the reset process.
- Reboot System:
- Once the data wipe is complete, the "Reboot system now" option should be selected by default.
- Press the Power button to reboot your device.
Your phone will now restart and go through the factory reset process. This may take a few minutes. Once it's done, you'll be presented with the Android setup screen.
- User
My Screen Stays black but the phone Vibrates when i press buttons
Assistant
Okay, if your ZTE Blade A35 Lite screen remains black but vibrates when you press buttons, it indicates the phone is likely on but the display isn't working. Here's a breakdown of potential causes and troubleshooting steps you can try:
Possible Causes:
- Display Issue: The most common cause is a problem with the display itself (e.g., damaged screen, loose connection).
- Software Glitch: A software problem might be preventing the screen from turning on.
- Hardware Problem: Other internal hardware issues could be responsible, though less likely than the above.
- Corrupted Firmware: In rare cases, a corrupted firmware can cause display problems.
Troubleshooting Steps:
- Force Reboot: Even though the screen is black, try a force reboot. This can sometimes resolve minor software glitches. The method may vary by phone model, but often involves holding the power button down for an extended period (20-30 seconds). If successful, you will see the phone restart.
- Try Hard Reset again: Follow the steps for hard reset that I mentioned previously. Since you can't see the screen, you'll have to do this blindly. The vibration feedback should help you navigate. This will only work if you can actually get into recovery mode (by pressing power and volume up), and the screen still has some functionality (even if you can't see it). After a hard reset, even if the screen is black, leave the phone for about 10-15 minutes to complete the reset process. After that time try to turn it on.
- Check for External Damage: Carefully inspect the screen for cracks or other signs of physical damage. Also, check the phone's body for any signs of bending or impact.
- Try connecting to a computer: Connect your phone to a computer using a USB cable. If your computer recognizes the device, it may indicate that the phone is functioning, but the screen is not working.
If the above steps don't work, consider these additional options:
- Check the display cable: If you are comfortable opening the phone, the display cable may have become loose.
- Contact Customer Service: The ZTE website states "If the handset vibrates when powered on but the screen is pure black or pure white, please contact customer service."
Since you've already tried a hard reset and the problem persists, it's likely a hardware issue. Therefore, the best course of action would be to take your phone to a qualified repair technician for diagnosis and repair.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.