Skip to content
TheChatArchiveThe Chat Archive
gpt-4o-search-preview· OpenAIHugging Face LMArena Search Arena 24K

squashfs determine image size and calculate hash without headers and tails

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.0-flash-grounding’s answer.
  1. User

    squashfs determine image size and calculate hash without headers and tails

  2. Assistant

    To determine the size of a SquashFS image and calculate its hash excluding the headers and tails, follow these steps:

    1. Identify the Superblock Size: The SquashFS superblock is located at the beginning of the image and is 96 bytes in size[1].

    2. Locate the End of the Filesystem Data: The superblock contains a field named bytes used, which indicates the number of bytes used by the filesystem. This value represents the end of the filesystem data within the image[1].

    3. Calculate the Hash: To compute the hash of the SquashFS image excluding the superblock and any trailing data beyond the filesystem, you can use the following command:

      tail -c +97 squashfs.img | head -c $(($(stat -c%s squashfs.img) - 96)) | sha256sum
      

      This command works as follows:

      • tail -c +97 squashfs.img: Skips the first 96 bytes (the superblock) of the image.

      • head -c $(($(stat -c%s squashfs.img) - 96)): Reads the number of bytes equal to the total size of the image minus the superblock size.

      • sha256sum: Computes the SHA-256 hash of the resulting data.

    Note: Ensure that the bytes used field in the superblock accurately reflects the end of the filesystem data. If there are additional headers or metadata beyond this point that you wish to exclude, you'll need to adjust the byte count accordingly.

    By following these steps, you can accurately determine the size of the SquashFS image and compute its hash, excluding the superblock and any trailing data beyond the filesystem.

  3. User

    image size does not determined while it is written to bigger partition. the only way to get it's size is read header.

  4. Assistant

    To determine the actual size of a SquashFS image and calculate its hash excluding headers and any trailing data, you can extract the bytes_used field from the superblock. This field indicates the number of bytes used by the filesystem, effectively representing the size of the SquashFS image.

    Steps to Extract bytes_used and Compute the Hash:

    1. Extract the bytes_used Field: The bytes_used field is located at an offset of 64 bytes from the start of the SquashFS image and is 8 bytes in length. You can extract this field using the dd command:

      dd if=squashfs.img bs=1 skip=64 count=8 2>/dev/null | od -An -t u8
      

      This command reads 8 bytes starting from the 64th byte of the image and outputs the value as an unsigned 64-bit integer.

    2. Calculate the Hash Excluding Headers and Trailing Data: Once you have the bytes_used value, you can compute the hash of the SquashFS image up to this size, effectively excluding any trailing data beyond the filesystem:

      bytes_used=$(dd if=squashfs.img bs=1 skip=64 count=8 2>/dev/null | od -An -t u8)
      head -c "$bytes_used" squashfs.img | sha256sum
      

      This sequence of commands does the following:

      • Extracts the bytes_used value from the superblock.

      • Uses head to read the SquashFS image up to the bytes_used size.

      • Computes the SHA-256 hash of the resulting data.

    Note: Ensure that the bytes_used field accurately reflects the end of the filesystem data. If there are additional headers or metadata beyond this point that you wish to exclude, you'll need to adjust the byte count accordingly.

    By following these steps, you can accurately determine the size of the SquashFS image and compute its hash, excluding the superblock and any trailing data beyond the filesystem.

  5. User

    od xxd does not available. python, awk does. how to get image size from header

  6. Assistant

    To determine the actual size of a SquashFS image and calculate its hash excluding headers and any trailing data, you can extract the bytes_used field from the superblock using Python. This field indicates the number of bytes used by the filesystem, effectively representing the size of the SquashFS image.

    Steps to Extract bytes_used and Compute the Hash:

    1. Extract the bytes_used Field: The bytes_used field is located at an offset of 64 bytes from the start of the SquashFS image and is 8 bytes in length. You can extract this field using Python's struct module:

      import struct
      
      with open('squashfs.img', 'rb') as f:
          f.seek(64)  # Move to the offset of the bytes_used field
          bytes_used = struct.unpack('<Q', f.read(8))[0]  # Read 8 bytes as a little-endian unsigned long long
      print(f'Bytes used: {bytes_used}')
      

      This script opens the SquashFS image file, seeks to the bytes_used field, reads 8 bytes, and unpacks them as a little-endian unsigned 64-bit integer.

    2. Calculate the Hash Excluding Headers and Trailing Data: Once you have the bytes_used value, you can compute the hash of the SquashFS image up to this size, effectively excluding any trailing data beyond the filesystem:

      import hashlib
      
      with open('squashfs.img', 'rb') as f:
          f.seek(0)  # Ensure we're at the start of the file
          data = f.read(bytes_used)  # Read up to the bytes_used value
          sha256_hash = hashlib.sha256(data).hexdigest()
      print(f'SHA-256 hash: {sha256_hash}')
      

      This script reads the SquashFS image up to the bytes_used size and computes its SHA-256 hash.

    Note: Ensure that the bytes_used field accurately reflects the end of the filesystem data. If there are additional headers or metadata beyond this point that you wish to exclude, you'll need to adjust the byte count accordingly.

    By following these steps, you can accurately determine the size of the SquashFS image and compute its hash, excluding the superblock and any trailing data beyond the filesystem.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.