Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro-exp-03-25-grounding· GoogleHugging Face LMArena Search Arena 24K

Search for and research rectifiers for the usage in traditional acid electrolysis for…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with gpt-4o-mini-search-preview’s answer.
  1. User

    Search for and research rectifiers for the usage in traditional acid electrolysis for the refinement of copper. Rectifier should be able to provide low-voltage (0 to about 10 V, although I’ll mostly be using it at 0.3 V to 0.5 V). It should be able to provide at least 200 A and up to 500 A. I will be running my operation out of my workshop, which has a dedicated 240V 200A standard US electric service. Carefully consider and evaluate different options and make expert recommendations. Include prices.

  2. Gemini Assistant

    Okay, let's research and evaluate rectifier options for your copper electrorefining setup in your workshop.

    Understanding Your Requirements:

    • Application: Copper Electrorefining (Acid Electrolysis)
    • Output Voltage: 0-10V DC (Primarily operating at 0.3V - 0.5V DC)
    • Output Current: 200A (min) to 500A (max) DC
    • Input Power: Standard US 240V Single Phase, 200A service available for the workshop.
    • Environment: Workshop (implies need for reasonable size, safety, and manageable cooling).

    Input Power Consideration:

    Your 240V, 200A service provides a maximum power capacity of 240V * 200A = 48 kVA (or 48 kW assuming a power factor of 1).

    Let's calculate the maximum input power your rectifier might draw:

    • Max Output Power: 10V * 500A = 5000W = 5 kW
    • Typical operating power: ~0.5V * 500A = 250W (very low power, but needs high current capability)
    • Estimated Input Power (assuming ~85-90% efficiency for a modern rectifier at full load): 5 kW / 0.85 = ~5.9 kW.
    • Estimated Input Current at 240V (assuming Power Factor ~0.95 for SMPS): (5900 W / 0.95) / 240V ≈ 25.8 Amps.
    • Even with a less efficient SCR rectifier (e.g., 75% eff, 0.7 PF): Input Power = 5kW / 0.75 = 6.67 kW. Apparent Power = 6.67kW / 0.7 = 9.5 kVA. Input Current = 9500 VA / 240V ≈ 39.6 Amps.

    Conclusion: Your 200A workshop service has ample capacity. You will need a dedicated circuit breaker appropriately sized for the specific rectifier's maximum input current draw (likely in the 40-60 Amp range for a 500A output unit), not the full 200A service capacity. Ensure the wiring gauge for this dedicated circuit is sufficient.

    Rectifier Technology Options:

    1. SCR (Silicon Controlled Rectifier) / Thyristor Rectifiers:

      • How they work: Use thyristors to switch the AC waveform, providing a phase-controlled DC output.
      • Pros: Robust, reliable, relatively simple technology, often less expensive (especially used), tolerant of harsh electrical environments.
      • Cons: Bulkier and heavier, lower efficiency (especially at part load), higher output ripple (which may require filtering for high-quality refining), lower power factor compared to SMPS. Control at very low voltages (<1V) might be less precise on older analog models.
      • Suitability: Very capable of high currents. The higher ripple might slightly affect deposit quality compared to smoother DC, but often acceptable for basic refining. Robustness is a plus.
    2. SMPS (Switch Mode Power Supply) / IGBT Rectifiers:

      • How they work: Convert AC to high-frequency AC, transform it, then rectify it to DC. Often use IGBTs (Insulated Gate Bipolar Transistors) for switching.
      • Pros: Much more compact and lightweight, higher efficiency (typically 85-92%+), lower output ripple, better power factor, often feature precise digital controls (good for low voltage setpoints), faster response times.
      • Cons: More complex internally, potentially more sensitive to input power quality issues or harsh environments, generally more expensive than SCR units new. Repair can be more specialized.
      • Suitability: Excellent for electroplating and refining due to low ripple and precise control. The size/weight advantage is significant for a workshop. Digital controls make setting and maintaining 0.3-0.5V easier.

    Key Features to Look For:

    • Output Range: Ensure it covers 0-10V and 0-500A (or your desired max). Verify the stability and control precision at the very low end (0.3-0.5V).
    • Input Voltage: Must be compatible with your 240V single-phase supply. Verify this carefully, as many industrial units >200A might expect 208V, 480V, or three-phase input. Finding a 500A unit on 240V single-phase might be slightly less common but is definitely possible.
    • Control: Digital controls are generally preferred for precision. Look for constant voltage (CV) and constant current (CC) modes. Remote control options can be useful.
    • Ripple: Lower is generally better for electrochemistry. SMPS units inherently have lower ripple. SCR units may need additional filtering. Ask for ripple specifications (% or mV RMS).
    • Cooling: Air-cooled is most practical for a workshop. Ensure adequate ventilation space around the unit. Water-cooled units exist but add complexity (need a water source/chiller).
    • Protection: Over-voltage, over-current, short-circuit, and over-temperature protection are essential safety features.
    • Certifications: UL listing or equivalent (like CSA, CE) provides assurance of safety testing and standards compliance. This is highly recommended for workshop use.
    • Duty Cycle: Ensure it's rated for 100% duty cycle at your expected operating current.

    Recommendations & Options (with Estimated Price Ranges - as of early 2025):

    First, let's search for specific suppliers and pricing indications. Based on the search results and general industry knowledge:

    Option 1: New Industrial SMPS/IGBT Rectifier (Recommended for Performance)

    • Technology: Switch Mode Power Supply (SMPS), often using IGBTs.
    • Pros: High efficiency (~90%+), compact size, lightweight, low output ripple (better for consistent refining), precise digital controls (excellent for maintaining 0.3-0.5V), good power factor. Modern features like data logging and remote control are often available.
    • Cons: Higher initial cost compared to SCR or used units. Potentially more sensitive to harsh workshop environments (dust, electrical noise) than SCR units, though industrial models are built robustly.
    • Brands to Consider: Dynapower, Process Technology (PPT), KraftPowercon, Plating Electronic (PE), Munk, American Plating Power, Aldonex.
    • Input Power: You must specify 240V single-phase input when ordering. Many standard models in this power range might default to three-phase or 480V.
    • Estimated Price (New 0-10V/12V, 500A, 240V Single Phase): 7,000−7,000 - 15,000+. Prices vary significantly by brand, features, and specific configuration. Requires getting quotes.

    Option 2: New Industrial SCR Rectifier

    • Technology: Silicon Controlled Rectifier (Thyristor).
    • Pros: Very robust and durable, proven technology, often handles dirty power or harsh environments well. Typically less expensive than a new SMPS unit of the same rating. Easier to troubleshoot/repair for general electricians.
    • Cons: Much larger and heavier, lower efficiency (especially at lower voltage/current outputs), higher output ripple (may need filtering), lower power factor. Analog controls might be less precise at very low voltages.
    • Brands to Consider: Same as above (Dynapower, Aldonex, PPT, etc.), as most major manufacturers offer both types.
    • Input Power: Specify 240V single-phase.
    • Estimated Price (New 0-10V/12V, 500A, 240V Single Phase): 5,000−5,000 - 10,000+. Requires quotes.

    Option 3: Used Industrial Rectifier (SCR or SMPS)

    • Technology: Can be either SCR or SMPS. SCR units are more commonly found on the used market due to their longevity.
    • Pros: Significant cost savings compared to new units. You might find a high-quality industrial unit for a fraction of the new price.
    • Cons: High Risk. Condition is often unknown, may require repairs or refurbishment. No warranty. May lack modern controls or features. Finding the exact voltage/current/input specs can be challenging. Output might not be stable at the very low voltages you need without testing.
    • Where to Look: Industrial surplus dealers (e.g., Lanco Corp, Baker Technology, Metal Finishing Mexico - check their inventory online), eBay (use caution), plating equipment forums.
    • Estimated Price (Used 0-10V/12V, 500A): 1,500−1,500 - 6,500+, highly dependent on age, condition, brand, and technology (SCR often cheaper). Search results show a used Dynapower 9V 500A listed at 6,250andaused12V500ATapRectifierat6,250 and a used 12V 500A Tap Rectifier at 2,500. Another listing shows a used Clinton 6V 500A with no price. Used prices vary widely.

    Option 4: Lower-Cost / Import SMPS Rectifiers

    • Technology: Typically SMPS.
    • Pros: Lowest initial purchase price. Often readily available online.
    • Cons: Significant concerns regarding reliability, build quality, actual performance vs. specs (especially stability at low V), safety certifications (lack of UL/CSA listing is common), customer support, and longevity. Ripple control might be poor. Repair might be impossible.
    • Where to Look: Alibaba, AliExpress, eBay, Amazon (often unbranded or lesser-known brands). Search results show listings on Alibaba for "10V 500A High Current Rectifier" around 500−500-800 (minimum order quantity might apply) and AliExpress listing a "12V 500 Amps Air Cooling Plating Rectifier". A "Volteq HY12500EX" (12V/500A, 220-240V single phase input) is listed on specialized sites for around 2,500(discountedfrom2,500 (discounted from 4,500).
    • Estimated Price (Import/Lower-Cost 0-10V/12V, 500A): 500−500 - 3,000.
    • Recommendation: Approach with extreme caution, especially given the high currents involved. Prioritize safety and verify specifications carefully if considering this route. The Volteq unit seems more substantial than typical Alibaba offerings but still warrants careful evaluation.

    Expert Recommendations & Summary:

    1. Best Performance & Long-Term Value (If Budget Allows): A New Industrial SMPS Rectifier (Option 1) from a reputable manufacturer configured for 240V single-phase input. This offers the best efficiency, control precision (crucial for 0.3-0.5V), smallest footprint, and low ripple. Expect costs in the 7k−7k-15k+ range.
    2. Robustness & Lower New Cost: A New Industrial SCR Rectifier (Option 2) is a viable, rugged alternative if the size, weight, and lower efficiency are acceptable. Cost likely 5k−5k-10k+.
    3. Budget-Conscious with Risk: A Used Industrial Rectifier (Option 3), preferably SCR for simplicity/robustness, sourced from a reputable dealer who tests equipment. Significant potential savings (2k−2k-6k), but factor in potential refurbishment costs and risks. Carefully check input voltage specs.
    4. Lowest Cost (High Risk): An Import/Lower-Cost SMPS (Option 4). Units like the Volteq (2.5k)mightbefunctional,butexerciseextremecautionregardingsafety,reliability,andactuallow−voltageperformance.UnbrandedunitsfromAlibaba(2.5k) might be functional, but exercise extreme caution regarding safety, reliability, and actual low-voltage performance. Unbranded units from Alibaba (500-$800) carry the highest risk. Not generally recommended for safety-critical, continuous operation without thorough vetting.

    Price Summary (Estimates):

    OptionTechnologyEstimated Price RangeKey Considerations
    1. New Industrial SMPSSMPS/IGBT7,000−7,000 - 15,000+Best performance, efficiency, control
    2. New Industrial SCRSCR5,000−5,000 - 10,000+Robust, simpler, lower new cost
    3. Used Industrial (SCR/SMPS)Either1,500−1,500 - 6,500+Significant savings, high risk/no warranty
    4. Lower-Cost / Import (e.g., Volteq)SMPS2,000−2,000 - 3,000Lower cost, potential quality issues
    5. Lower-Cost / Import (Alibaba etc.)SMPS500−500 - 1,500Lowest cost, highest risk (safety/perf.)

    Final Considerations:

    • Safety First: High current DC is dangerous. Ensure proper installation, heavy gauge wiring (sized for 500A+ DC), secure connections, and adherence to electrical codes. Look for UL/CSA/CE markings.
    • Low Voltage Precision: Reconfirm with the manufacturer/seller that the chosen unit provides stable and precise voltage control in the 0.3V - 0.5V range. Digital controls on SMPS units are usually better for this.
    • Get Quotes: Prices above are estimates. Contact manufacturers (like Dynapower, Process Technology) or reputable dealers directly for accurate quotes based on your specific requirements (0-10V, 50

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.