Skip to content
TheChatArchiveThe Chat Archive
Perplexitysonar-pro-high· PerplexityHugging Face LMArena Search Arena 24K

I am running freeswitch on Debian 11 with 4 vcpu, 8 GB Ram and 100 GB vhdd in a VMware…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.0-flash-grounding’s answer.
  1. User

    I am running freeswitch on Debian 11 with 4 vcpu, 8 GB Ram and 100 GB vhdd in a VMware vSphere virtual machine, how many G.711 ulaw VoIP sessions should it handle?

  2. Perplexity Assistant

    The number of concurrent G.711 μ-law VoIP sessions your FreeSWITCH server can handle depends on several factors, including CPU, memory, network bandwidth, and system configuration. Based on your setup (4 vCPUs, 8 GB RAM, and 100 GB virtual HDD on VMware vSphere), here is an estimate:

    Key Considerations

    1. Bandwidth Requirements:

      • G.711 μ-law requires 64 kbps per call in one direction, or 128 kbps for a two-way call, excluding overhead for IP, UDP, and RTP headers. With a 20 ms packetization interval, the overhead adds approximately 16 kbps, making the total bandwidth per call around 144 kbps[[1]][[2]][[12]].
    2. CPU Usage:

      • G.711 is computationally light since it does not involve compression. A modern CPU can handle hundreds of concurrent G.711 sessions, provided there is no transcoding or additional processing like encryption or packet inspection[[9]][[13]].
    3. Memory Usage:

      • Each call consumes a small amount of memory for session management. With 8 GB of RAM, memory is unlikely to be a bottleneck unless the server is running other resource-intensive applications[[3]][[5]].
    4. Network Bandwidth:

      • Assuming a gigabit Ethernet connection, the theoretical maximum number of G.711 calls is around 10,500 concurrent sessions, but practical limits are lower due to network overhead and other factors[[3]].
    5. FreeSWITCH Performance:

      • FreeSWITCH is highly optimized for VoIP and can handle thousands of concurrent calls on modern hardware. However, the actual number depends on your specific configuration, including SIP signaling, RTP handling, and any additional features like call recording or transcoding[[5]][[13]].

    Estimated Capacity

    Given your hardware and assuming no transcoding or additional heavy processing:

    • CPU: With 4 vCPUs, you can expect to handle approximately 500–1,000 concurrent G.711 sessions, depending on the efficiency of your FreeSWITCH configuration and the load on the virtualized environment[[3]][[5]][[13]].
    • Bandwidth: If you have a 1 Gbps network connection, the bandwidth would support approximately 6,800 concurrent G.711 calls (1 Gbps ÷ 144 kbps per call). However, real-world performance will be lower due to other network traffic and overhead[[3]][[12]].

    Recommendations

    • Optimize Configuration: Ensure FreeSWITCH is configured for high performance, including proper ulimit settings and prioritization of RTP traffic[[3]].
    • Monitor Resources: Use monitoring tools to observe CPU, memory, and network usage as call volume increases.
    • Test Load: Conduct stress tests to determine the actual capacity of your setup under real-world conditions.

    In summary, your server should comfortably handle several hundred G.711 μ-law VoIP sessions, with the exact number depending on system tuning and workload specifics.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.