Vivado generates .bit file but fpgautil requires .bin?
- User
Vivado generates .bit file but fpgautil requires .bin?
- Assistant
Yes, this is a common situation when working with Xilinx FPGAs.
Vivado typically generates a .bit file as the default output for FPGA configuration. This
.bitfile contains the bitstream in a format suitable for programming the FPGA via JTAG or other direct configuration methods.However, some tools or utilities, such as fpgautil (often used for programming flash memory or certain embedded systems), require a .bin file, which is a raw binary bitstream without the header information present in the
.bitfile.
How to convert
.bitto.binin VivadoYou can convert the
.bitfile to a.binfile using the Vivado command line toolpromgenor the newerbootgenutility, or directly from the Vivado GUI.Using Vivado GUI:
- Open Vivado.
- Go to File > Export > Export Hardware (if needed).
- Use the "Generate Memory Configuration File" option or open the "File > Convert Bitstream" dialog.
- Select your
.bitfile as input. - Choose
.binas the output format. - Generate the
.binfile.
Using command line (Vivado Tcl shell):
# Open Vivado Tcl shell or run vivado -mode tcl promgen -b -p bin -u 0 -o output_file.bin -w input_file.bit-bindicates binary output.-p binspecifies the output file type.-u 0disables the user data.-ospecifies the output file name.-wspecifies the input.bitfile.
Alternatively, with
bootgen(for newer Vivado versions):bootgen -image input.bif -o output.bin -wWhere
input.bifis a Boot Image Format file describing the bitstream and other files.
Summary
- .bit = bitstream with header, used for FPGA programming.
- .bin = raw binary bitstream, often required for flash programming or certain utilities.
- Convert
.bitto.binusing Vivado tools (promgen,bootgen, or GUI).
If you provide your Vivado version or exact command you are using, I can give you a more tailored command.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.