Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-sonnet-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

I have an OCI VM which requires > 20% CPU utilization at the 95th percentile to avoid…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-7-sonnet-20250219-thinking-32k’s answer.
  1. User

    I have an OCI VM which requires > 20% CPU utilization at the 95th percentile to avoid OCI from deleting the VM. To avoid deletion of my VM, I intend to use the script that I provide below to artificially increase the CPU utilization. However, there is a problem with this script, because the specified base CPU load (of 25%) is not increased by a random amount up to the specified additional percentage (of 10%) to cover the total CPU load range of 25% to 35%. I suspect that the cause of this problem is in how the fluctuation is calculated before it is added to the specified base CPU load within the function generate_random_fluctuation() because the calculation multiplies the fluctuation by the base - which is incorrect. Please correct the error and explain how to replace the currently running service on the VM with that of the corrected script. Here is the function:

    #!/bin/bash

    --- Configuration ---

    BASE_TARGET_MIN_TOTAL_CPU_UTIL=25 # Base target minimum total CPU utilization (percentage) ADDITIONAL_FLUCTUATION_PERCENTAGE=10 # Additional percentage of fluctuation beyond the base target MIN_CHECK_INTERVAL_SECONDS=5.0 # Minimum check interval in seconds (can be fractional) MAX_CHECK_INTERVAL_SECONDS=15.0 # Maximum check interval in seconds (can be fractional) NICE_LEVEL=19 # Lowest CPU scheduling priority

    --- Logic ---

    Function to get current overall CPU utilization (100 - idle percentage)

    get_current_cpu_utilization() {

    Get idle percentage from vmstat.

    vmstat first line is average since boot, second line is current sample.

    We take the second sample after a 1-second interval.

    $15 is the 'id' (idle) column in vmstat output.

    IDLE_CPU=(vmstat 1 2 | tail -1 | awk '{print 15}') CURRENT_UTILIZATION=(echo"100−(echo "100 - IDLE_CPU" | bc) echo "$CURRENT_UTILIZATION" }

    Function to generate a random fluctuation beyond the specified percentage

    generate_random_fluctuation() { local additional_fluctuation_percentage=1localbasetarget=1 local base_target=2 local fluctuation=(echo"(echo "additional_fluctuation_percentage * 0.01" | bc) local random_value=(echo"(echo "RANDOM % 100" | bc) local fluctuation_amount=(echo"(echo "fluctuation * basetarget∗(base_target * (random_value / 100)" | bc) local adjusted_target=(echo"(echo "base_target + fluctuationamount"∣bc)echo"fluctuation_amount" | bc) echo "adjusted_target" }

    Function to generate a random check interval within the specified range

    generate_random_check_interval() { local min_interval=1localmaxinterval=1 local max_interval=2 local range=(echo"(echo "max_interval - mininterval"∣bc)localrandomfraction=min_interval" | bc) local random_fraction=(echo "scale=6; RANDOM/32767"∣bc)localinterval=RANDOM / 32767" | bc) local interval=(echo "mininterval+(min_interval + (range * randomfraction)"∣bc)echo"random_fraction)" | bc) echo "interval" }

    echo "Dynamic CPU Load Manager started." echo "Base target minimum CPU: BASETARGETMINTOTALCPUUTILecho"Additionalfluctuationpercentage:{BASE_TARGET_MIN_TOTAL_CPU_UTIL}%" echo "Additional fluctuation percentage: {ADDITIONAL_FLUCTUATION_PERCENTAGE}%" echo "Check interval range: MINCHECKINTERVALSECONDSsto{MIN_CHECK_INTERVAL_SECONDS}s to {MAX_CHECK_INTERVAL_SECONDS}s" echo "Nice level: ${NICE_LEVEL}"

    Ensure no orphaned stress-ng processes from previous runs if script was killed abruptly

    pkill -f "stress-ng --cpu 0 --cpu-load"

    while true; do

    Generate a random check interval for this iteration

    CHECK_INTERVAL_SECONDS=(generaterandomcheckinterval"(generate_random_check_interval "MIN_CHECK_INTERVAL_SECONDS" "$MAX_CHECK_INTERVAL_SECONDS")

    CURRENT_CPU_UTIL=(getcurrentcpuutilization)CURRENTCPUUTILINT=(get_current_cpu_utilization) CURRENT_CPU_UTIL_INT={CURRENT_CPU_UTIL%.*} # Convert to integer for bash comparison

    echo "(date):CurrentCPUUtil:(date): Current CPU Util: {CURRENT_CPU_UTIL}%"

    Generate a random fluctuation beyond the base target

    TARGET_MIN_TOTAL_CPU_UTIL=(generaterandomfluctuation"(generate_random_fluctuation "ADDITIONAL_FLUCTUATION_PERCENTAGE" "$BASE_TARGET_MIN_TOTAL_CPU_UTIL")

    Check if we need to add artificial load

    if (( CURRENT_CPU_UTIL_INT < TARGET_MIN_TOTAL_CPU_UTIL )); then # Calculate the potential load stress-ng should attempt to generate. LOAD_TO_GENERATE=$TARGET_MIN_TOTAL_CPU_UTIL

    echo "$(date): Below target. Current: ${CURRENT_CPU_UTIL}%. Adding load (aiming for ${LOAD_TO_GENERATE}% on workers) for ${CHECK_INTERVAL_SECONDS}s."
    
    # Run stress-ng at the lowest priority.
    # Note: We're using the same random check interval for the stress-ng timeout
    nice -n "$NICE_LEVEL" stress-ng --cpu 0 --cpu-load "$LOAD_TO_GENERATE" --timeout "${CHECK_INTERVAL_SECONDS}s" --quiet &
    

    else echo "(date):Atorabovetarget.Current:(date): At or above target. Current: {CURRENT_CPU_UTIL}%. No artificial load needed." fi

    Wait for the next check interval.

    echo "(date):Nextcheckin(date): Next check in {CHECK_INTERVAL_SECONDS}s." sleep "$CHECK_INTERVAL_SECONDS" done

  2. Claude Assistant

    You're absolutely correct about the issue in the generate_random_fluctuation() function. The current calculation multiplies the fluctuation by the base target, which creates a percentage of a percentage rather than adding a flat percentage range.

    Here's the corrected function:

    # Function to generate a random fluctuation beyond the specified percentage
    generate_random_fluctuation() {
      local additional_fluctuation_percentage=$1
      local base_target=$2
      local random_value=$(echo "$RANDOM % 100" | bc)
      local fluctuation_amount=$(echo "$additional_fluctuation_percentage * ($random_value / 100)" | bc)
      local adjusted_target=$(echo "$base_target + $fluctuation_amount" | bc)
      echo "$adjusted_target"
    }
    

    What was wrong: The original calculation $fluctuation * $base_target * ($random_value / 100) was multiplying the additional percentage by the base target. For example, with a 25% base and 10% additional fluctuation, it would calculate 10% of 25% (2.5%) instead of adding up to 10% directly.

    What's fixed: The new calculation $additional_fluctuation_percentage * ($random_value / 100) directly calculates a random value between 0 and the additional fluctuation percentage, then adds it to the base target. This gives you the desired range of 25% to 35%.

    How to replace the running service:

    1. Stop the current service:

      sudo systemctl stop your-cpu-manager-service
      # Or if it's running as a simple background process:
      sudo pkill -f "Dynamic CPU Load Manager"
      
    2. Update the script file:

      sudo nano /path/to/your/cpu-manager-script.sh
      

      Replace the generate_random_fluctuation() function with the corrected version above.

    3. Make sure the script is executable:

      sudo chmod +x /path/to/your/cpu-manager-script.sh
      
    4. Restart the service:

      sudo systemctl start your-cpu-manager-service
      # Or if running directly:
      nohup /path/to/your/cpu-manager-script.sh > /var/log/cpu-manager.log 2>&1 &
      
    5. Verify it's working:

      sudo systemctl status your-cpu-manager-service
      # Or check the process:
      ps aux | grep "cpu-manager"
      

    The corrected script will now properly generate CPU utilization targets between 25% and 35% as intended.

  3. User

    provide the entire corrected script

  4. Claude Assistant

    Here's the entire corrected script:

    #!/bin/bash
    
    # --- Configuration ---
    BASE_TARGET_MIN_TOTAL_CPU_UTIL=25    # Base target minimum total CPU utilization (percentage)
    ADDITIONAL_FLUCTUATION_PERCENTAGE=10  # Additional percentage of fluctuation beyond the base target
    MIN_CHECK_INTERVAL_SECONDS=5.0        # Minimum check interval in seconds (can be fractional)
    MAX_CHECK_INTERVAL_SECONDS=15.0       # Maximum check interval in seconds (can be fractional)
    NICE_LEVEL=19                         # Lowest CPU scheduling priority
    
    # --- Logic ---
    
    # Function to get current overall CPU utilization (100 - idle percentage)
    get_current_cpu_utilization() {
      # Get idle percentage from vmstat.
      # vmstat first line is average since boot, second line is current sample.
      # We take the second sample after a 1-second interval.
      # $15 is the 'id' (idle) column in vmstat output.
      IDLE_CPU=$(vmstat 1 2 | tail -1 | awk '{print $15}')
      CURRENT_UTILIZATION=$(echo "100 - $IDLE_CPU" | bc)
      echo "$CURRENT_UTILIZATION"
    }
    
    # Function to generate a random fluctuation beyond the specified percentage
    generate_random_fluctuation() {
      local additional_fluctuation_percentage=$1
      local base_target=$2
      local random_value=$(echo "$RANDOM % 100" | bc)
      local fluctuation_amount=$(echo "$additional_fluctuation_percentage * ($random_value / 100)" | bc)
      local adjusted_target=$(echo "$base_target + $fluctuation_amount" | bc)
      echo "$adjusted_target"
    }
    
    # Function to generate a random check interval within the specified range
    generate_random_check_interval() {
      local min_interval=$1
      local max_interval=$2
      local range=$(echo "$max_interval - $min_interval" | bc)
      local random_fraction=$(echo "scale=6; $RANDOM / 32767" | bc)
      local interval=$(echo "$min_interval + ($range * $random_fraction)" | bc)
      echo "$interval"
    }
    
    echo "Dynamic CPU Load Manager started."
    echo "Base target minimum CPU: ${BASE_TARGET_MIN_TOTAL_CPU_UTIL}%"
    echo "Additional fluctuation percentage: ${ADDITIONAL_FLUCTUATION_PERCENTAGE}%"
    echo "Check interval range: ${MIN_CHECK_INTERVAL_SECONDS}s to ${MAX_CHECK_INTERVAL_SECONDS}s"
    echo "Nice level: ${NICE_LEVEL}"
    
    # Ensure no orphaned stress-ng processes from previous runs if script was killed abruptly
    pkill -f "stress-ng --cpu 0 --cpu-load"
    
    while true; do
      # Generate a random check interval for this iteration
      CHECK_INTERVAL_SECONDS=$(generate_random_check_interval "$MIN_CHECK_INTERVAL_SECONDS" "$MAX_CHECK_INTERVAL_SECONDS")
      
      CURRENT_CPU_UTIL=$(get_current_cpu_utilization)
      CURRENT_CPU_UTIL_INT=${CURRENT_CPU_UTIL%.*} # Convert to integer for bash comparison
    
      echo "$(date): Current CPU Util: ${CURRENT_CPU_UTIL}%"
    
      # Generate a random fluctuation beyond the base target
      TARGET_MIN_TOTAL_CPU_UTIL=$(generate_random_fluctuation "$ADDITIONAL_FLUCTUATION_PERCENTAGE" "$BASE_TARGET_MIN_TOTAL_CPU_UTIL")
    
      # Check if we need to add artificial load
      if (( CURRENT_CPU_UTIL_INT < TARGET_MIN_TOTAL_CPU_UTIL )); then
        # Calculate the potential load stress-ng should attempt to generate.
        LOAD_TO_GENERATE=$TARGET_MIN_TOTAL_CPU_UTIL
    
        echo "$(date): Below target. Current: ${CURRENT_CPU_UTIL}%. Adding load (aiming for ${LOAD_TO_GENERATE}% on workers) for ${CHECK_INTERVAL_SECONDS}s."
    
        # Run stress-ng at the lowest priority.
        # Note: We're using the same random check interval for the stress-ng timeout
        nice -n "$NICE_LEVEL" stress-ng --cpu 0 --cpu-load "$LOAD_TO_GENERATE" --timeout "${CHECK_INTERVAL_SECONDS}s" --quiet &
    
      else
        echo "$(date): At or above target. Current: ${CURRENT_CPU_UTIL}%. No artificial load needed."
      fi
    
      # Wait for the next check interval.
      echo "$(date): Next check in ${CHECK_INTERVAL_SECONDS}s."
      sleep "$CHECK_INTERVAL_SECONDS"
    done
    

    The only change from your original script is in the generate_random_fluctuation() function, where I removed the multiplication by $base_target from the fluctuation calculation. This ensures that the script will now correctly generate target CPU utilization values between 25% and 35% (your base of 25% plus up to 10% additional fluctuation).

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.