Are there any problems with this AWS architecture proposal? │ │ Network Load Balancer…
- User
Are there any problems with this AWS architecture proposal?
│ │ Network Load Balancer Implementation Plan for DCV WebSocket Connections │ │ │ │ │ │ │ │ Current Architecture Overview │ │ │ │ │ │ │ │ - Environment tasks are created dynamically by the orchestration service │ │ │ │ - Each task runs DCV server on port 8443 with self-signed certificates │ │ │ │ - Frontend connects directly to task public IPs: https://{public_ip}:8443 │ │ │ │ - Current setup causes browser certificate warnings │ │ │ │ │ │ │ │ Proposed Solution: NLB with SSL/TLS Termination │ │ │ │ │ │ │ │ 1. Create Network Load Balancer Infrastructure │ │ │ │ │ │ │ │ - File: computer_use_aws/constructs/load_balancing.py │ │ │ │ - Add new NetworkLoadBalancerConstruct class │ │ │ │ - Configure NLB for TCP traffic on port 8443 │ │ │ │ - Enable cross-zone load balancing for better distribution │ │ │ │ - Create target group for environment tasks │ │ │ │ │ │ │ │ 2. Implement SSL/TLS Certificate Management │ │ │ │ │ │ │ │ - File: computer_use_aws/constructs/security.py │ │ │ │ - Add ACM certificate request for NLB domain │ │ │ │ - Use DNS validation (preferred) or email validation │ │ │ │ - Certificate will validate *.elb.amazonaws.com domain │ │ │ │ │ │ │ │ 3. Configure NLB Listener with TLS │ │ │ │ │ │ │ │ - File: computer_use_aws/constructs/load_balancing.py │ │ │ │ - Add TLS listener on port 8443 │ │ │ │ - Configure SSL policy for WebSocket compatibility │ │ │ │ - Set backend protocol to TCP (pass-through to DCV) │ │ │ │ │ │ │ │ 4. Dynamic Target Registration │ │ │ │ │ │ │ │ - File: computer_use_aws/constructs/serverless.py │ │ │ │ - Create Lambda function to register/deregister ECS tasks │ │ │ │ - Trigger on ECS task state changes (EventBridge) │ │ │ │ - Register tasks with private IPs to NLB target group │ │ │ │ │ │ │ │ 5. Update Security Groups │ │ │ │ │ │ │ │ - File: computer_use_aws/constructs/security.py │ │ │ │ - Add NLB security group │ │ │ │ - Allow inbound 8443 from anywhere to NLB │ │ │ │ - Update environment SG to allow 8443 from NLB only │ │ │ │ - Remove direct public access to environment tasks │ │ │ │ │ │ │ │ 6. Modify Task Configuration │ │ │ │ │ │ │ │ - File: computer_use_aws/stacks/container_stack.py │ │ │ │ - Remove assignPublicIp: 'ENABLED' from environment tasks │ │ │ │ - Tasks will use private IPs only │ │ │ │ - Configure health checks for target group │ │ │ │ │ │ │ │ 7. Update Frontend Connection Logic │ │ │ │ │ │ │ │ - File: computer_use_aws/frontend/src/TabContainer.tsx │ │ │ │ - Change from https://{public_ip}:8443 to NLB endpoint │ │ │ │ - Use NLB DNS name with proper SSL certificate │ │ │ │ - Update connection URL pattern │ │ │ │ │ │ │ │ 8. Add NLB Outputs │ │ │ │ │ │ │ │ - File: computer_use_aws/stacks/main_stack.py │ │ │ │ - Output NLB DNS name │ │ │ │ - Output NLB ARN for monitoring │ │ │ │ - Add instructions for DNS alias if custom domain needed │ │ │ │ │ │ │ │ Benefits │ │ │ │ │ │ │ │ 1. Valid SSL Certificate: Browser trusts ELB certificate │ │ │ │ 2. Simplified Access: Single endpoint for all DCV connections │ │ │ │ 3. Better Security: Environment tasks not directly exposed │ │ │ │ 4. Scalability: NLB handles load distribution automatically │ │ │ │ 5. Health Monitoring: Built-in health checks for targets │ │ │ │ │ │ │ │ Implementation Order │ │ │ │ │ │ │ │ 1. Create NLB and certificate infrastructure │ │ │ │ 2. Set up Lambda for dynamic target registration │ │ │ │ 3. Update security groups │ │ │ │ 4. Modify ECS task configuration │ │ │ │ 5. Update frontend to use NLB endpoint │ │ │ │ 6. Test end-to-end connectivity │ │ │ │ │ │ │ │ Notes │ │ │ │ │ │ │ │ - NLB preserves WebSocket connections (Layer 4) │ │ │ │ - TLS termination at NLB, then TCP to backend │ │ │ │ - Backend DCV self-signed certs remain unchanged │ │ │ │ - Consider using custom domain with Route53 alias
- Assistant
Here are a few areas in your plan that deserve a second look—together with some recommendations and optional alternatives.
-
ACM Certificate on “*.elb.amazonaws.com”
• You cannot request an ACM cert for*.elb.amazonaws.com(you don’t own that zone).
• You’ll need a custom domain (e.g.*.dcv.example.com) in Route 53 (or a public DNS provider), validate via DNS (Route 53 makes this trivial), then point an alias record to your NLB. -
Security-Group Lockdown
• NLBs don’t have Security Groups, and they preserve the client’s source IP to the backend.
• Your ECS tasks will see the original client IP, so their SG must allow inbound 8443 from 0.0.0.0/0 (or whatever CIDR you explicitly trust).
• You cannot say “allow only from the NLB” by SG-to-SG reference—since the actual source is the end-user. -
Health Checks at Layer 4
• By using a TCP health check, the NLB only verifies “is port 8443 open?”, not “is the DCV WebSocket endpoint actually responding?”
• If you want deeper liveness, consider:
– A HTTP(S)-based health check on a lightweight DCV endpoint (if one exists), via an Application Load Balancer.
– Or embed a tiny side-car container that answers/healthfor TCP+HTTP checks. -
ALB vs NLB for WebSockets
• ALB (L7) has first-class WebSocket support, configurable idle timeouts (default 60 s, max 4000 s), and richer health checks.
• NLB (L4) is ultra-fast, preserves source IP, but its idle timeout is fixed (350 s) and not tunable. For persistent DCV sessions, an ALB may actually be a better fit—and supports TLS termination or pass-through just as easily. -
Dynamic Target Registration Complexity
• Rolling your own Lambda/EventBridge →RegisterTargets→DeregisterTargetsworks, but you’ll introduce:
– Registration lag (a few seconds before an instance shows healthy)
– Edge cases when ECS tasks rapidly start/stop
• If these are ECS services, you can use the built-in ECS target-group integration (just point your service at the NLB target group, awsvpc mode). -
Cross-Zone & Subnet Placement
• Enabling cross-zone load balancing is good, but confirm your NLB is “internet-facing” and spans multiple public subnets.
• Your tasks themselves live in private subnets (good), and do not require an Internet Gateway or NAT gateway, as they only receive inbound from the NLB. -
TLS Policy & Cipher Suites
• Make sure you pick an AWS TLS policy that supports the ciphers required by DCV and modern browsers (e.g.ELBSecurityPolicy-TLS-1-2-2017-01or newer).
• Test withopenssl s_client -connect yournlb:8443 -tls1_2and verify the negotiated cipher is acceptable. -
Monitoring & Logging
• Turn on NLB Flow Logs (via VPC Traffic Mirroring to CloudWatch or S3) if you ever need to troubleshoot.
• Use CloudWatch metrics (HealthyHostCount,TargetResponseTime) and alarms to catch issues early.
— — — — —
Summary Table
Concern Potential Pitfall Recommendation ACM for aws-owned domain ACM won’t issue *.elb.amazonaws.comUse your own domain + DNS validation Security Groups Cannot SG-to-SG reference NLB; source IP is client IP Allow 8443 from trusted CIDRs (or 0.0.0.0/0) Health checks (L4 TCP only) No app-level liveness Use ALB for HTTP checks or side-car health WebSocket idle timeouts NLB’s 350 s idle timeout is fixed Consider ALB (tunable up to 4000 s) Dynamic registration latency Lambda + EventBridge may lag when tasks start/stop Use ECS service → target group integration If you’re happy sticking with a pure-TCP, minimal-latency path, your NLB + ECS+Lambda approach will work—just adjust the SGs & certs. If you need richer health-checks, longer WebSocket idle times or simpler ECS integration, think about an Application Load Balancer instead.
Let me know if you’d like a deeper dive on any of the above! 😊
-
- User
Does ELB have ssl termination or provide a trusted certificate for this kind of router/reverse proxy use case by default without ACM?
- Assistant
AWS’s ELBs (Classic, ALB, NLB) all support SSL/TLS termination, but none of them ship with a browser-trusted cert out of the box for your custom workloads. You have to provide the certificate yourself—either via ACM or (for Classic ELB) via IAM server certificates.
Here’s the quick breakdown:
- Classic Load Balancer
• Supports HTTPS listeners and SSL termination
• You can upload/import a certificate into IAM (or ACM) and attach it to the CLB - Application Load Balancer (ALB)
• Supports HTTPS listeners, SSL termination, WebSockets, HTTP(S) health checks
• Must use a certificate managed in ACM (no IAM option) - Network Load Balancer (TLS listener)
• Supports TLS listeners (Layer-4 TLS termination)
• Must use an ACM certificate
If you want a fully “managed” cert without touching ACM or IAM, your only AWS-native option is to layer in something like CloudFront in front of your ELB. CloudFront distributions come with a default
*.cloudfront.netcert—but then you’re trading one reverse proxy (ELB) for another (CloudFront), which may or may not fit your latency/architecture requirements.Bottom line:
• ELB = SSL termination, yes.
• Browser-trusted cert = your responsibility (ACM or imported).
• No “free wildcard for*.elb.amazonaws.com” is available. - Classic Load Balancer
- User
Can I layer cloud front in front of an NLB, then route to a number of ECS tasks running DCV behind that?
- Assistant
You can technically put CloudFront in front of an NLB… but in practice it rarely buys you what you’re really after when it comes to DCV/WebSockets and “free” certs. Here’s why:
-
CloudFront only speaks HTTP/HTTPS (and WebSocket-over-HTTP) to its origin
- Your NLB is by default a Layer-4 TCP/TLS proxy.
- CloudFront can’t do raw TCP pass-through, it will always wrap things in HTTP(S).
- If you configure CloudFront’s origin protocol policy to HTTPS, it will do a TLS handshake to the NLB—so your NLB still needs a valid, browser-trusted cert (i.e. ACM).
- If you switch CloudFront → origin to HTTP, then your DCV server must accept plain-text WebSocket (ws://) on 80 or 8080—which it doesn’t, out-of-the-box, and you lose end-to-end encryption.
-
CloudFront’s “default” cert only covers
*.cloudfront.net- If you use
d1234.cloudfront.netfor everything and never expose your own domain, then yes CloudFront’s built-in cert “just works.” - But almost everyone wants
dcv.example.com. For that you upload an ACM cert into CloudFront anyway.
- If you use
-
You don’t avoid ACM by adding CloudFront
- You still need to terminate TLS somewhere you control.
- Either at CloudFront (viewer cert) and at the origin (origin cert), or
- At the origin alone (if you do HTTP origin), which breaks WSS + encryption.
-
Added complexity & latency
- You introduce another TCP hop and DNS hop.
- Troubleshooting a three-leg handshake (Client → CF → NLB → ECS) is more painful.
— — —
When you really want browser-trusted WebSockets + simple certificate management, you have two easy AWS-native choices:
• Application Load Balancer + ACM
– ALB speaks HTTPS (with your ACM-managed cert).
– ALB supports WebSocket upgrade, tunable idle timeouts, HTTP(S) health checks.
– Front-end DNS (Route 53 Alias) → ALB DNS.
– No need for CloudFront unless you want caching/WAF/CDN.• CloudFront → ALB → ECS
– Use CF’s managed edge cert (for*.cloudfront.netor import your own ACM cert into CF).
– Origin = your ALB (you can do HTTP→ALB, then ALB does HTTPS→ECS).
– Adds CDN/WAF/edge-cache, still all HTTP-based.If you insist on NLB for raw TCP (to preserve source IP or super-low latency), just:
- Request an ACM cert for your own domain (e.g.
dcv.example.com). - Attach that cert to your NLB’s TLS listener on 443 (or 8443).
- Point Route 53 Alias
dcv.example.com→ NLB DNS.
That gives you:
– Layer-4 TCP/TLS termination at the NLB
– Browser-trusted cert from ACM
– No CloudFront in the middleHope that helps clarify! Feel free to ping back if you need a deep dive on ALB vs. NLB vs. CloudFront for DCV. 😊
-
- User
I'm setting up a demo for this and it's fine to go create a domain name. But I need the domain to be dynamically generated so any random person spinning this demo up via CDK in their account can get a new domain name that isn't already used. How do I do this in AWS?
- Assistant
Here are your main options for “fully managed”, always‐unique domains in AWS—ranked by simplicity and real‐world friction:
1) Use “no custom domain” and just eat the AWS load-balancer (or CloudFront) DNS name
• Every NLB/ALB or CloudFront distribution already gets a globally unique endpoint like:
–mynlb-1234567890.us-west-2.elb.amazonaws.com
–d1abcd2345efgh.cloudfront.net
• Browsers will trust an AWS-owned cert for those names, without you ever touching ACM.
• CDK snippet (CloudFront example):
ts const distro = new cloudfront.Distribution(this, 'Distro', { defaultBehavior: { origin: new origins.HttpOrigin(myNlbDnsName, { protocolPolicy: OriginProtocolPolicy.HTTPS_ONLY }) }, }); new CfnOutput(this, 'Endpoint', { value: distro.domainName });
• Pros: zero cert-management, zero DNS setup, instantly unique.
• Cons: you don’t control “myapp.example.com”, but most demos are fine pointing at*.elb.amazonaws.comor*.cloudfront.net.2) If you do need a “real” custom domain, subdomains are trivial—just own one root and spin out as many kids as you like
• Pre-register something you control (e.g.demo-dcv.example.com)
• In your CDK stack you:
1. import that Zone viaHostedZone.fromHostedZoneAttributes(...)
2. generate a random ID, e.g.const rand = this.node.tryGetContext('demoId') ?? Fn.randomString(6)
3. create an A-record like${rand}.demo-dcv.example.com → your NLB/ALB (Alias)
• CDK snippet:
```ts // 1) bring in your pre-existing parent zone const parentZone = HostedZone.fromHostedZoneAttributes(this, 'ParentZone', { hostedZoneId: 'Z0123456789ABCDEF', // your demo-zone’s ID zoneName: 'demo-dcv.example.com' });// 2) random subdomain const label = Stack.of(this).stackName.toLowerCase().slice(0,6); const fqdn = `${label}.${parentZone.zoneName}`; // 3) point it at your load-balancer new ARecord(this, 'DemoRecord', { zone: parentZone, recordName: label, target: RecordTarget.fromAlias(new LoadBalancerTarget(myNlb)), }); new CfnOutput(this, 'URL', { value: `https://${fqdn}` }); ```• Pros: you get
xxxxxx.demo-dcv.example.com, browser-trusted via ACM.
• Cons: you must own the root (demo-dcv.example.com) ahead of time.3) (Advanced) Auto-register brand-new TLDs on the fly via Route 53 Domains
• CDK hasDomainName/CfnDomainif you really want to buy “abcdef123456.com” programmatically.
• You can callcheckDomainAvailabilityin a Custom Resource, loop until you find an open name, then invokeregisterDomain.
• Drawbacks:
– Latency: registration takes minutes (or hours) to become active.
– Cost: each domain is ~$12+/year.
– Complexity: you’ll need a CFN Custom Resource or Lambda to orchestrate it.
• Only choose this if your demo must have a unique top-level domain per deployment—and you don’t mind waiting and paying for each demo.— — —
Recommendation for a quick demo
Go with option 1: use the existing AWS-provided endpoint. If you need “pretty” names but still want zero-touch, use a CloudFront distribution (it gives you a unique*.cloudfront.netURL with built-in SSL). That way anyone cdks up your stack and immediately has a trusted, unique URL—no domain registration, no ACM calls, no “already taken.” - User
But you've already said that "Use “no custom domain” and just eat the AWS load-balancer (or CloudFront) DNS name" that I can't get that DNS name to ssl terminate?
- Assistant
You’re correct—my “eat the AWS LB DNS name” shortcut only works on CloudFront, not on an ALB/NLB. Here’s the nuance:
• NLB/ALB
– You must attach a certificate (via ACM or IAM) to any HTTPS/TLS listener.
– They do not come with a browser-trusted cert for their own*.elb.amazonaws.comname.• CloudFront
– When you create a distribution, AWS automatically provisions a valid TLS cert fordXXXXXXXXXX.cloudfront.net.
– You get HTTPS out-of-the-box, no ACM calls required.
– You can even enable WebSocket support.So if you try to point your browser at
https://my-nlb-1234567890.us-west-2.elb.amazonaws.com, you’ll get a cert error unless you’ve explicitly attached a cert.––––––––––––––––––––––––––––––––––––
Two paths for a zero-touch, trust-worthy URL:-
CloudFront → ALB → ECS/DCV
- Viewer-side TLS:* uses CloudFront’s built-in
*.cloudfront.netcert - Origin-side protocol:* HTTP or HTTPS to the ALB (ALB doesn’t need a cert if you use HTTP)
- WebSocket support:* yes (CloudFront + ALB both speak it)
- Pros:* no ACM, no custom domain, instant unique HTTPS URL.
- Cons:* adds extra hop, you must wrap DCV in HTTP/WebSocket rather than raw TCP.
- Viewer-side TLS:* uses CloudFront’s built-in
-
NLB (or ALB) + ACM + Route 53 Subdomain
- Create or import an ACM cert for
*.yourdomain.com - In CDK, randomly generate a subdomain (e.g.
abc123.demo.example.com) - Point that subdomain (Route 53 Alias) at your NLB’s DNS name
- Pros:* direct Layer-4 (NLB) or L7 (ALB) WebSocket, end-to-end TLS, source-IP preservation (NLB).
- Cons:* you must own the parent zone and manage ACM.
- Create or import an ACM cert for
––––––––––––––––––––––––––––––––––––
If your DCV demo can speak WebSocket-over-HTTP, path #1 (CloudFront + ALB) is the quickest way to hand someone a trusted HTTPS URL with zero cert-or-domain setup. Otherwise you’ll need to bite the bullet on ACM + Route 53 for an ALB/NLB listener. -
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.