Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

ok m uch better with that setting off. dci-p3 is up to 107% for example (volume i think?…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with DeepSeekdeepseek-r1-0528’s answer.
  1. User

    ok m uch better with that setting off. dci-p3 is up to 107% for example (volume i think? or was it the other thing?) anyway

  2. Claude Assistant

    Excellent! That's exactly what you should be seeing. 107% DCI-P3 sounds right for the ASUS XG27AQDMG with its LG WOLED panel.

    What you're seeing:

    • 107% DCI-P3 = Your monitor can display all of DCI-P3 plus 7% extra volume beyond it
    • This matches the specs perfectly (WOLED panels typically hit 105-110% DCI-P3)
    • You'll probably also see ~96-98% Adobe RGB now

    Volume vs Coverage:

    DisplayCAL shows both:

    • Coverage = % of the reference gamut your monitor can display (capped at 100%)
    • Volume = Total color space size relative to reference (can exceed 100%)

    Your 107% is likely volume - meaning your monitor's gamut is physically larger than DCI-P3 in some areas (probably in the deep reds/greens where WOLED excels).

    Quick sanity check:

    Your profile report should now show something like:

    • sRGB: ~140-150% volume
    • DCI-P3: ~107% volume / ~99% coverage
    • Adobe RGB: ~96-98% coverage

    If those numbers look right, you're golden! The massive jump from 70% to 107% confirms Windows ACM was definitely interfering with your measurements before.

    Remember to turn Windows ACM back ON now for daily use - your new profile will handle the color management properly. 🎨

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.