Why my tws connected to 5 year old phone its volume must set above 80 so i can hear…
- User
Why my tws connected to 5 year old phone its volume must set above 80 so i can hear music, but my 2 year tablet only need 30 with similar loudness
Assistant
Okay, this is a common issue and there are several reasons why you're experiencing this difference in volume levels between your 5-year-old phone and your 2-year-old tablet when using the same TWS earbuds. Here's a breakdown of the likely causes, and what you can do about it:
1. Audio Codec Support & Bluetooth Version Differences:
- Older Phone (5 years old): Older phones often support older Bluetooth codecs (like SBC). SBC is the most basic and least efficient codec. It requires more power to transmit the same audio quality, and often results in a lower maximum volume. It also might not be optimized for modern TWS earbuds. The Bluetooth version on a 5-year-old phone is likely Bluetooth 4.2 or earlier.
- Newer Tablet (2 years old): Your tablet likely supports more advanced Bluetooth codecs like AAC or even aptX (or aptX HD). These codecs are more efficient, deliver better audio quality at lower bitrates, and allow for a wider dynamic range. This means you can get the same perceived loudness at a lower volume setting. It's also likely running a newer Bluetooth version (5.0 or 5.1), which improves connection stability and efficiency.
- How it affects volume: The codec dictates how the audio data is compressed and transmitted. A less efficient codec (SBC) needs more amplification to achieve the same loudness, hence the higher volume setting on your phone.
2. Audio Amplifier/DAC (Digital-to-Analog Converter) Quality:
- Older Phone: The DAC and amplifier in your older phone are likely less powerful and of lower quality than those in your newer tablet. A weaker amplifier needs the volume turned up higher to drive the earbuds to the same level. The DAC might also be introducing more noise, requiring you to increase the volume to overcome it.
- Newer Tablet: Tablets generally have better audio components than phones, as they have more space for them and aren't as constrained by size and power consumption. A better DAC and amplifier can deliver more power and cleaner audio at lower volume settings.
3. Software/Operating System Differences:
- Older Phone: The audio processing software on your older phone might be less optimized. It might not be handling the audio signal as efficiently, leading to a lower output level. Older OS versions might have bugs or limitations in their audio handling.
- Newer Tablet: Newer operating systems (Android, iPadOS) often have improved audio processing algorithms and better integration with Bluetooth audio devices.
4. Earbud Impedance & Sensitivity:
- Earbud Specs: The impedance (measured in ohms) and sensitivity (measured in dB/mW) of your TWS earbuds play a role. If the earbuds have a relatively high impedance, they require more power to drive them to a given volume. If they have low sensitivity, they also need more power.
- Phone/Tablet Output: The phone and tablet have different output impedances. A mismatch between the output impedance and the earbud impedance can affect the volume and sound quality. (This is less common, but possible).
5. Volume Normalization/Equalization Settings:
- Phone/Tablet Settings: Both your phone and tablet might have volume normalization or equalization settings enabled. These settings can automatically adjust the volume levels of different audio sources. It's possible that the settings are different on each device, leading to the volume discrepancy.
- Earbud App: Some TWS earbuds have companion apps that allow you to customize the sound profile and volume levels. Check if there are any settings in the earbud app that might be affecting the volume.
Troubleshooting Steps to Try:
-
Check Bluetooth Codec:
- Android: Go to Developer Options (you may need to enable it first - search online for how to enable Developer Options on your specific phone model). Within Developer Options, look for "Bluetooth Audio Codec." See what codec is being used when connected to your phone. If it's SBC, that's a strong indicator of the problem. Try selecting AAC if it's available.
- iOS (iPad): iOS generally prefers AAC. There's no direct way to force a different codec.
-
Check Volume Normalization/Equalizer:
- Android: Go to Settings > Sound (or Audio) > Volume. Look for options like "Volume Normalization," "Equalizer," or "Sound Enhancement." Disable these temporarily to see if they're causing the issue.
- iOS (iPad): Go to Settings > Music > EQ. Turn off EQ. Also check Settings > Accessibility > Audio/Visual > Headphone Accommodations (turn off if enabled).
-
Update Software:
- Make sure both your phone and tablet are running the latest operating system updates.
-
Earbud Firmware:
- Check if there's a firmware update available for your TWS earbuds. Use the companion app (if there is one) to check for updates.
-
Test with Different Earbuds:
- If possible, try connecting a different pair of TWS earbuds to your phone. If the volume issue persists, it's more likely a problem with the phone itself.
-
Reset Bluetooth Connections:
- On both devices, "forget" or "unpair" the TWS earbuds from the Bluetooth settings. Then, re-pair them.
-
Clear Bluetooth Cache (Android only):
- Go to Settings > Apps > Show System Apps > Bluetooth Share. Tap "Storage" and then "Clear Cache." (Be careful not to clear data unless you want to reset all Bluetooth pairings).
-
Consider a USB DAC/Amp (for the phone - more advanced):
- If you're a serious audiophile and want to improve the audio quality on your phone, you could consider purchasing a portable USB DAC/amplifier. This bypasses the phone's internal DAC and amplifier and provides a much cleaner and more powerful audio signal.
In summary: The most likely cause is the combination of older Bluetooth codecs and lower-quality audio components in your 5-year-old phone. Trying the troubleshooting steps above, especially checking the Bluetooth codec and disabling volume normalization, should help you improve the situation. Don't expect a perfect fix, but you might be able to reduce the volume difference significantly.
- User
Aac already enabled
Assistant
Okay, that's good to know AAC is already enabled on the phone. That eliminates one of the biggest potential culprits. Since AAC is enabled and you're still experiencing the significant volume difference, it points more strongly to the hardware limitations of the older phone.
Here's a refined focus on what's likely happening and what you can try, given that AAC is already in use:
1. Hardware is the Primary Suspect:
- Weak Amplifier: The amplifier in your 5-year-old phone is almost certainly the biggest bottleneck. Even with AAC, a weak amplifier simply can't deliver the same power to the earbuds as the tablet's amplifier.
- Lower Quality DAC: The DAC in the older phone is likely contributing to the problem. A lower-quality DAC introduces more noise and distortion, requiring you to turn up the volume to overcome these imperfections.
2. Deeper Dive into Software Settings (Even Though You've Checked Basics):
- Developer Options - Bluetooth Audio Sample Rate/Bits: Within Developer Options (on the phone), look for settings related to Bluetooth audio sample rate and bits per sample. Sometimes, forcing a lower sample rate (e.g., 44.1kHz instead of 48kHz) can improve compatibility and volume, though it might slightly reduce audio quality. Experiment with these settings.
- Specific App Volume Controls: Are you using the same music app on both devices? Some music apps have their own volume controls that can override the system volume. Check the volume settings within the music app itself on both the phone and the tablet.
- Accessibility Settings (Phone): Double-check the Accessibility settings on the phone. Sometimes, features designed to help people with hearing impairments can inadvertently affect the volume levels. Specifically, look for anything related to audio amplification or headphone accommodations.
3. Earbud-Specific Considerations:
- Earbud App (Again): Even if you've checked before, revisit the companion app for your earbuds. Look for any settings related to volume, equalization, or sound profiles. Some earbuds have different profiles optimized for different devices or use cases. Make sure you're using a neutral or default profile.
- Earbud Firmware (Re-Check): It's worth checking for a firmware update for the earbuds again. Manufacturers sometimes release updates that address compatibility issues.
4. Testing & Isolation:
- Wired Headphones: If you have a pair of wired headphones, connect them to your phone. Does the volume issue persist with wired headphones? If so, it strongly confirms that the problem is with the phone's audio output, not with Bluetooth specifically.
- Different Music File: Try playing a different music file on both devices. Is the volume difference consistent across all music files, or does it vary? (This helps rule out issues with the specific music file itself).
5. Realistic Expectations & Potential Solutions (Beyond Troubleshooting):
- Acceptance: Unfortunately, there's a limit to how much you can fix with software tweaks. The hardware limitations of the older phone are likely the primary cause.
- USB-C Dongle DAC/Amp (Best Solution, but Costly): As mentioned before, a USB-C to 3.5mm headphone jack adapter with a built-in DAC and amplifier is the best solution. This bypasses the phone's internal audio circuitry and provides a much cleaner and more powerful signal. Look for one specifically designed for mobile devices. (This will require a USB-C port on your phone).
- New Phone (Long-Term Solution): If audio quality is important to you, upgrading to a newer phone with better audio components is the ultimate solution.
To help me narrow down the possibilities further, could you tell me:
- What is the exact model of your phone? (Knowing the specific model will allow me to research its audio specifications).
- What music app are you using on both devices?
- What is the make and model of your TWS earbuds?
- Does the volume difference occur with all audio sources (music, podcasts, videos, etc.), or just music?
- User
I enabled absolute volume in dev option, now it can be heard around 50%
Assistant
Excellent! That's a significant improvement and strongly suggests the issue was related to the phone's volume scaling and dynamic range.
What "Absolute Volume" Does:
"Absolute Volume" bypasses the normal Android volume scaling and sends a fixed-level signal to the audio output. This can be helpful when dealing with devices that have weak amplifiers or inconsistent volume control. It essentially forces the phone to output a consistent signal level, regardless of the volume setting.
Why it Worked:
Your older phone's amplifier was likely struggling to deliver enough power at lower volume settings. Absolute Volume essentially "boosts" the signal, allowing the amplifier to drive the earbuds to a usable level even at 50%.
Next Steps & Considerations:
-
Fine-Tune the Volume: Now that you can hear the audio at 50%, experiment with slightly lower volume settings to find the sweet spot where the audio is loud enough without distortion.
-
Potential Drawbacks of Absolute Volume:
- Loss of Granular Control: Absolute Volume can sometimes reduce the granularity of volume control. You might find that the volume jumps in larger increments.
- Potential for Clipping: If the signal is too strong, it can cause clipping (distortion). Listen carefully for any signs of distortion, especially at higher volume settings.
-
Test with Different Audio Sources: Make sure the improvement is consistent across all audio sources (music, podcasts, videos, etc.).
-
Revisit Earbud App: Double-check the earbud app again. Now that you've adjusted the phone's volume behavior, you might be able to fine-tune the sound profile in the earbud app to further optimize the audio quality.
-
Consider Leaving it Enabled: If Absolute Volume solves the problem without introducing any significant drawbacks, you can leave it enabled.
In conclusion: Enabling Absolute Volume was a clever workaround that addressed the limitations of your phone's audio amplifier. It's a good solution if it provides a satisfactory listening experience without causing distortion or other issues.
I'm glad we were able to find a solution! It highlights how sometimes a little-known developer option can make a big difference.
-
- User
Model is moondrop block
Assistant
Okay, MoonDrop Block TWS earbuds! That's helpful to know. They are known for being relatively power-hungry and having a slightly higher impedance than some other TWS options, which reinforces why your older phone was struggling. They're also designed to be driven by a good source to really shine.
Knowing the earbuds are MoonDrop Block further validates that the Absolute Volume fix was the right approach. They benefit from a stronger, cleaner signal.
Here's a bit more tailored advice, now that we know the earbuds:
- MoonDrop App Settings: Make sure you've explored all the settings within the MoonDrop Link app (the companion app for the Block earbuds). There are EQ presets and potentially other settings that can influence the volume and sound signature. Experiment with different presets to see if any of them improve the listening experience with your phone.
- Impedance Matching (Less Critical Now): The Block earbuds have a higher impedance. While Absolute Volume has largely solved the problem, a dedicated USB-C DAC/Amp (as previously discussed) would still provide the best possible impedance matching and power delivery, unlocking the full potential of the earbuds. But, with Absolute Volume enabled, it's less of a necessity.
- Battery Life: Keep an eye on the battery life of the earbuds. Driving them at higher volumes (even with Absolute Volume) might consume more battery power.
- Long-Term Monitoring: Continue to monitor for any signs of distortion or audio artifacts. If you notice any, try lowering the volume slightly or experimenting with different EQ settings in the MoonDrop app.
Overall:
You've done a great job troubleshooting this issue! Enabling Absolute Volume was a smart move, and it's likely the best solution you can achieve without investing in additional hardware. The MoonDrop Block earbuds are excellent, and now you can enjoy them more fully with your phone.
If you ever decide to upgrade your phone in the future, you'll likely find that the volume issue disappears entirely with a newer device that has a more powerful and refined audio output.
- User
Any other setting to tweak
Assistant
Okay, let's exhaustively explore any remaining settings you can tweak, now that we've gotten to a good baseline with Absolute Volume. We'll cover phone settings, earbud app settings, and even some more obscure options.
I. Phone (MoonDrop Block + Older Phone)
- Developer Options (Revisit):
- Bluetooth Audio Codec: Double-check it's still set to AAC. Sometimes it can revert.
- Bluetooth Audio Sample Rate/Bits: Experiment with different combinations (44.1kHz/16-bit, 48kHz/16-bit, etc.). Lowering the sample rate slightly can sometimes improve compatibility, but it might subtly reduce audio quality.
- USB Audio Output: (If your phone has a USB-C port) - This is a long shot, but see if there's an option to force USB audio output. It might bypass some of the internal audio processing.
- Sound Quality Enhancements (Disable All): Go through every sound-related setting on your phone and disable anything that claims to "enhance" or "improve" the audio. This includes:
- Dolby Atmos (if present)
- DTS:X (if present)
- Equalizers (even if you're not actively using them)
- Sound Normalization
- Volume Equalizer
- Smart Amplifier
- Any "bass boost" or "clarity" features.
- Accessibility Settings:
- Mono Audio: Ensure this is disabled.
- Headphone Accommodations: (If present) - Disable any settings here.
- App-Specific Volume: Check the volume settings within the music app you're using. Make sure it's not limiting the volume or applying any equalization.
II. MoonDrop Link App (Earbud Settings)
- EQ Presets: Cycle through all the EQ presets in the MoonDrop Link app. Some presets might be better suited to your phone's audio output.
- Custom EQ: If you're comfortable with EQ, create a custom EQ profile. A slight boost in the mid-frequencies (around 1-3kHz) can sometimes improve clarity and perceived loudness. Be careful not to overdo it, as this can cause distortion.
- Soundstage Adjustment: The MoonDrop Link app might have settings to adjust the soundstage (the perceived width and depth of the sound). Experiment with these settings to see if they affect the listening experience.
- Transparency Mode/Noise Cancellation: If you're using noise cancellation, try disabling it temporarily to see if it improves the volume or clarity. Noise cancellation can sometimes reduce the overall audio output level.
- Firmware Updates: Double-check for firmware updates for the earbuds again.
III. Advanced/Obscure Options (Proceed with Caution)
- Bluetooth Connection Reset: Completely remove the earbuds from your phone's Bluetooth list. Restart your phone. Then, re-pair the earbuds.
- Cache Clearing (Android): Clear the cache for the Bluetooth Share app (as described in a previous response).
- Safe Mode (Android): Boot your phone into Safe Mode. This disables all third-party apps. If the volume issue is resolved in Safe Mode, it indicates that a third-party app is interfering with the audio.
Important Notes:
- Document Changes: Keep track of any changes you make so you can easily revert them if they don't improve the situation.
- Listen Critically: Pay close attention to the audio quality as you make changes. Look for any signs of distortion, clipping, or a loss of clarity.
- Small Increments: Make small adjustments at a time. This will help you isolate the effects of each change.
I know this is a long list, but we're trying to be thorough. Start with the easiest and most likely options (phone sound enhancements, EQ presets in the MoonDrop app) and work your way down the list.
Let me know if you try any of these settings and what the results are. We can continue to refine the adjustments until you're satisfied with the sound.
- Developer Options (Revisit):
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.