Skip to content
TheChatArchiveThe Chat Archive
Kimikimi-k2-0711-preview· Moonshot AIHugging Face LMArena Human Preference 140K

in artix 7, can one module write to bran and another module read it at the same time

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o3-mini’s answer.
  1. User

    in artix 7, can one module write to bran and another module read it at the same time

  2. Kimi Assistant

    In the Artix-7 (and other Xilinx 7-series FPGAs), Block RAM (BRAM) can be configured as dual-port RAM, which allows two independent ports to access the same memory array.

    ✅ Short Answer:

    Yes, one module can write to BRAM while another module reads from it at the same time, as long as:

    • The BRAM is configured as true dual-port RAM (TDP),
    • The read and write addresses are different, or
    • You are okay with undefined behavior if both ports access the same address simultaneously (read-during-write behavior).

    🔍 Details:

    1. True Dual-Port RAM (TDP)

    • Each port has its own clock, address, data, and control signals.
    • Port A and Port B can operate independently.
    • You can configure Port A as write and Port B as read, or vice versa.

    2. Simultaneous Access

    • Different addresses: ✅ Safe. No conflict.
    • Same address:
      • Write on Port A, Read on Port B:
        • Behavior depends on the BRAM configuration:
          • WRITE_FIRST: Read returns the new data being written.
          • READ_FIRST: Read returns the old data before write.
          • NO_CHANGE: Read data is invalid or undefined.
      • You must explicitly choose the behavior in your BRAM configuration.

    3. How to Configure

    • Use Xilinx IP Catalog → Block Memory Generator:
      • Choose True Dual-Port RAM.
      • Set Port A and Port B independently.
      • Set write mode (WRITE_FIRST, READ_FIRST, NO_CHANGE) under port settings.

    ✅ Summary Table

    ScenarioSafe?Notes
    Write on A, Read on B, diff addr✅No conflict
    Write on A, Read on B, same addr⚠️Depends on write mode
    Write on A, Write on B, same addr❌Collision, undefined

    ✅ Recommendation

    If you want safe concurrent access, ensure:

    • Use True Dual-Port RAM.
    • Avoid simultaneous access to the same address unless you control the behavior via write mode.

    Let me know if you want a Verilog example or IP config walkthrough.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt