Skip to content
TheChatArchiveThe Chat Archive
Mistralmistral-medium-2505· Mistral AIHugging Face LMArena Human Preference 140K

curl: (28) Failed to connect to…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-lite-preview-06-17-thinking’s answer.
  1. User

    curl: (28) Failed to connect to internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com port 8292 after 10001 ms: Timeout was reached

  2. Mistral Assistant

    This error indicates that your curl command failed to establish a connection to the specified host (internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com) on port 8292 within the timeout period of 10,001 milliseconds (10 seconds).

    Possible Causes:

    1. Network Connectivity Issues:

      • The host may not be reachable from your current network.
      • There could be a firewall or security group blocking the connection.
      • The host might be down or not responding.
    2. DNS Resolution Issues:

      • The hostname might not be resolving correctly to an IP address.
    3. Service Not Running:

      • The service on port 8292 might not be running or is not listening on the expected interface.
    4. Security Groups/NACLs (AWS-Specific):

      • If this is an AWS ELB (Elastic Load Balancer), check the security groups and network ACLs to ensure traffic is allowed on port 8292.
    5. VPC or Subnet Issues:

      • The ELB or the target instances might be in a different VPC or subnet that is not accessible from your location.

    Troubleshooting Steps:

    1. Check Hostname Resolution:

      nslookup internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com
      

      or

      dig internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com
      

      Ensure the hostname resolves to an IP address.

    2. Test Connectivity: Use telnet or nc to test if the port is reachable:

      telnet internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com 8292
      

      or

      nc -zv internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com 8292
      
    3. Check AWS Security Groups:

      • Go to the AWS Console and check the security groups associated with the ELB and the target instances.
      • Ensure inbound rules allow traffic on port 8292 from your IP or the appropriate source.
    4. Check ELB Health:

      • Verify that the ELB is healthy and that the target instances are registered and healthy.
    5. Check VPC and Subnet Configuration:

      • Ensure the ELB and the target instances are in the correct subnets and that the route tables and network ACLs allow the traffic.
    6. Increase Timeout (if needed): If the service is slow to respond, you can increase the timeout in your curl command:

      curl --connect-timeout 30 http://internal-lend-cap-core-adaptor-private-825234548.eu-west-1.elb.amazonaws.com:8292
      
    7. Check from Another Location:

      • Try accessing the endpoint from a different network or machine to rule out local network issues.

    If you're still facing issues, you may need to contact the team managing the ELB or the service to verify its status and configuration.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.