If we have a circular wooden disc with a height of 20 cm and a diameter of 20 cm, with a…
- User
If we have a circular wooden disc with a height of 20 cm and a diameter of 20 cm, with a wood density of 0.5 kilogram per liter, and we place it to float in water, then place a 200-gram piece of ice with a temperature of -10°C on top of it, knowing that the ice melts at a rate of 1% every 5 minutes, and the room temperature is 25°C, calculate: The depth of the submerged part of the wooden disc immediately after placing the ice piece on top of it. The depth of the submerged part of the wooden disc after one hour has passed."
- Assistant
Given data
Item Symbol Value Unit Disc diameter D 20 cm ( ⇒ radius r = 10 cm = 0.10 m ) Disc height (thickness) H 20 cm = 0.20 m Wood density ρ₍wₒₒd₎ 0.5 kg / L = 500 kg m⁻³ Water density ρ₍water₎ 1 000 kg m⁻³ Ice mass (initial) mᵢ₀ 200 g = 0.20 kg Ice‑melting rate — 1 % of the remaining mass every 5 min Time interval to check t 1 h = 60 min
1. Geometry and mass of the wooden disc
Cross‑sectional area
A = π r² = π (0.10 m)² = 0.031 416 m²Volume of the disc
V_disc = A · H = 0.031 416 m² × 0.20 m = 0.006 283 m³Mass of the disc
m_disc = ρ₍wₒₒd₎ · V_disc
= 500 kg m⁻³ × 0.006 283 m³ ≈ 3.14 kg
2. Submergence principle
When the system floats,
mass of displaced water = total mass resting on the discDisplaced volume (V_{disp}) = (total mass) / ρ₍water₎
Submerged depth (h) = (V_{disp}) / A
A) Immediately after the ice is put on the disc
Total mass at t = 0
m₀ = m_disc + mᵢ₀ = 3.14 kg + 0.20 kg = 3.34 kgDisplaced volume
V_disp₀ = 3.34 kg / 1 000 kg m⁻³ = 0.003 34 m³Submerged depth
(h₀ = V_{disp₀}/A = 0.003 34 m³ / 0.031 416 m² ≈ 0.106 m = 10.6 cm)
B) After 1 hour
Number of 5‑minute intervals in 1 h:
n = 60 min / 5 min = 12Remaining fraction of ice
(0.99)¹² ≈ 0.8869Remaining ice mass
mᵢ₁ = 0.20 kg × 0.8869 ≈ 0.177 kgMass that has melted
m_melt = 0.20 kg – 0.177 kg ≈ 0.023 kg (≈ 23 g)Two realistic scenarios:
-
The melt water runs off the flat disc.
• Only the still‑solid ice remains as load. -
The melt water stays on the disc (as a shallow puddle).
• Then the total load never changes.
Below is the depth for both cases.
Case Total mass on disc after 1 h Submerged depth h₁ Melt water runs off m_disc + mᵢ₁ = 3.14 kg + 0.177 kg = 3.317 kg h₁ = (3.317 kg / 1000) / A ≈ 0.1057 m = 10.6 cm Melt water stays unchanged, 3.34 kg 10.6 cm (same as initial)
3. Results (rounded to two significant mm)
• Immediately after the ice is placed: 10.63 cm of the disc is below the water surface.
• One hour later: ≈ 10.57 cm if the melt water runs off (otherwise it remains 10.63 cm).Either way the change is only about 0.6 mm, so the disc essentially keeps the same draft.
-
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.