Skip to content
The Chat Archive
magistral-medium-2506 LMArena Human Preference 140K

can you create .yml file with labs for cisco cml?

  1. User

    can you create .yml file with labs for cisco cml?

  2. Assistant

    Here's a YAML file for a basic Cisco CML lab with two routers and one switch:

    lab:
      title: 'Basic Network Lab'
      description: 'A simple lab with two routers and a switch'
      version: 1.0
    nodes:
      - id: n0
        label: R1
        node_definition: iosv
        x: -200
        y: 0
        configuration: |
          hostname R1
          interface GigabitEthernet0/0
           ip address 192.168.1.1 255.255.255.0
           no shutdown
      - id: n1
        label: R2
        node_definition: iosv
        x: 0
        y: 0
        configuration: |
          hostname R2
          interface GigabitEthernet0/0
           ip address 192.168.1.2 255.255.255.0
           no shutdown
      - id: n2
        label: SW1
        node_definition: iosv-l2
        x: 100
        y: 0
        configuration: |
          hostname SW1
          interface GigabitEthernet0/0
           switchport mode access
           no shutdown
          interface GigabitEthernet0/1
           switchport mode access
           no shutdown
    links:
      - id: l0
        source: n0
        target: n2
        source_label: GigabitEthernet0/0
        target_label: GigabitEthernet0/0
      - id: l1
        source: n1
        target: n2
        source_label: GigabitEthernet0/0
        target_label: GigabitEthernet0/1
    

    This YAML file defines a lab with two routers (R1 and R2) and one switch (SW1). The routers are connected to the switch via Ethernet links. The routers are configured with IP addresses in the same subnet (192.168.1.0/24), and the switch is configured with access ports. This setup allows the routers to communicate with each other through the switch.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.