Skip to content
TheChatArchiveThe Chat Archive
Mistralmistral-medium-2505· Mistral AIHugging Face LMArena Human Preference 140K

Assuming 0,0,0 is scene center, where would you place the 3 lights to illuminate a 2x2x2…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-4-maverick-03-26-experimental’s answer.
  1. User

    Assuming 0,0,0 is scene center, where would you place the 3 lights to illuminate a 2x2x2 meters environment with a classic “three-point” studio lighting setup?

  2. Mistral Assistant

    For a classic three-point lighting setup in a 2x2x2 meter environment with the scene center at (0, 0, 0), here’s a typical placement of the three lights:

    1. Key Light (Main Light)

    • Position: ~45° to the side and slightly above the subject.
    • Coordinates (approximate):
      • X: ~1.5 m (to the side, e.g., +X or -X)
      • Y: ~0.5 m (slightly above eye level)
      • Z: ~1.0 m (forward of the subject)
    • Purpose: Primary illumination, creating shadows for depth.

    2. Fill Light (Secondary Light)

    • Position: Opposite the key light, softer and lower intensity.
    • Coordinates (approximate):
      • X: ~-1.0 m (opposite side of the key light)
      • Y: ~0.3 m (slightly lower than the key light)
      • Z: ~1.0 m (forward but closer to the camera axis)
    • Purpose: Softens shadows created by the key light.

    3. Back Light (Rim/Hair Light)

    • Position: Behind and above the subject, pointing downward.
    • Coordinates (approximate):
      • X: ~0.0 m (directly behind or slightly off-center)
      • Y: ~1.5 m (high above, near the top of the 2m height)
      • Z: ~-1.0 m (behind the subject)
    • Purpose: Separates the subject from the background, adding depth.

    Additional Notes:

    • Light Angles: The key and fill lights are typically 30–60° apart (e.g., key at 45° left, fill at 15° right).
    • Intensity Ratios: A common ratio is Key:Fill:Back = 1:0.5:0.5 (fill and back are usually dimmer).
    • Modifiers: Softboxes or diffusers are often used on the key and fill lights, while the back light may use a snoot or grid for precision.

    This setup ensures balanced illumination with depth and dimension while keeping the subject well-lit within the 2x2x2m space. Adjustments can be made based on the subject’s size and desired mood.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.