Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash-preview-04-17· GoogleHugging Face LMArena Human Preference 140K

Is there a way to pass -Ofast as a command in cmake without editing the file??

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-lite-preview-06-17-thinking’s answer.
  1. User

    Is there a way to pass -Ofast as a command in cmake without editing the file??

  2. Gemini Assistant

    Yes, there are several ways to pass compiler flags like -Ofast to CMake without directly editing the project's CMakeLists.txt files.

    Here are the most common and effective methods:

    1. Using CMake Cache Variables on the Command Line (-D) This is the most standard way to override or add configuration variables directly when you run the cmake command for the first time or when you want to update existing cache values.

      You set the CMAKE_C_FLAGS and CMAKE_CXX_FLAGS cache variables.

      • For C++:
        cmake -DCMAKE_CXX_FLAGS="-Ofast" /path/to/source
        
      • For C:
        cmake -DCMAKE_C_FLAGS="-Ofast" /path/to/source
        
      • For both C and C++:
        cmake -DCMAKE_C_FLAGS="-Ofast" -DCMAKE_CXX_FLAGS="-Ofast" /path/to/source
        

      Explanation:

      • -D tells cmake to set a CMake variable in the cache.
      • CMAKE_CXX_FLAGS and CMAKE_C_FLAGS are standard CMake variables that hold the default compiler flags used for all targets (unless a target specifically overrides them).
      • /path/to/source is the directory containing the top-level CMakeLists.txt.

      Caveats:

      • This sets the initial flags. If the project's CMakeLists.txt uses add_compile_options() after setting these, or if it uses target_compile_options() with the REPLACE keyword, your flags might be overridden. However, in many well-behaved projects, setting CMAKE_C_FLAGS and CMAKE_CXX_FLAGS this way will work or be combined with project-specific flags.
      • If you've already configured the project and these variables exist in your CMakeCache.txt, you might need to delete the build directory/cache or use ccmake/cmake-gui to modify the existing cache entry.
    2. Using CMakePresets.json (Recommended for Modern CMake) If you are using CMake 3.19 or later, you can create a CMakePresets.json file in the root of your source directory. This file doesn't modify the project's build system files (CMakeLists.txt), but it allows you to define configuration presets that can include specific cache variables.

      Create a file named CMakePresets.json in the same directory as your main CMakeLists.txt:

      {
        "version": 4,
        "configurePresets": [
          {
            "name": "ofast-build",
            "displayName": "Build with -Ofast Optimization",
            "description": "Configures the project with -Ofast flags.",
            "generator": "Unix Makefiles", // Or your preferred generator (e.g., "Ninja")
            "binaryDir": "${sourceDir}/build/ofast",
            "cacheVariables": {
              "CMAKE_C_FLAGS": "-Ofast",
              "CMAKE_CXX_FLAGS": "-Ofast",
              "CMAKE_BUILD_TYPE": "Release" // Often good to combine -Ofast with Release build type
            }
          }
        ]
      }
      

      Then, configure your project using this preset:

      cmake --preset ofast-build
      

      After configuring, build normally:

      cmake --build --preset ofast-build
      

      Explanation:

      • This file defines a named configuration ("ofast-build").
      • The "cacheVariables" section allows you to set any CMake cache variable, including CMAKE_C_FLAGS and CMAKE_CXX_FLAGS.
      • binaryDir sets a specific build directory for this preset, keeping it separate.
      • cmake --preset <name> tells CMake to use the specified configuration from the file.

      Benefits:

      • Clean and organized way to define configurations.
      • Does not require modifying the project's core CMakeLists.txt.
      • Easy to share presets with others.
      • Repeatable build setup.
    3. Using Environment Variables (Less Reliable) You can set the CFLAGS and CXXFLAGS environment variables before running cmake. CMake often picks these up, but it's less guaranteed than using the -D flag for CMAKE_C_FLAGS/CMAKE_CXX_FLAGS, as projects can be written to ignore environment variables.

      # For bash/zsh
      export CXXFLAGS="-Ofast"
      export CFLAGS="-Ofast"
      cmake /path/to/source
      make # or ninja, etc.
      
      # Or on a single line (less portable than export)
      CFLAGS="-Ofast" CXXFLAGS="-Ofast" cmake /path/to/source && make
      

      Caveats:

      • Whether CMake and the underlying build system (Make, Ninja) pick these up depends on the CMake version, generator, and how the CMakeLists.txt is written.
      • These environment variables often append to existing flags, which might not always be the desired behavior compared to replacing or explicitly setting.
      • Less control than setting CMake cache variables directly.

    Conclusion:

    • For a one-off build or quick test without creating new files, using the -D flag with CMAKE_C_FLAGS and CMAKE_CXX_FLAGS is the most common method.
    • For a repeatable, clean setup, especially if you plan to build this way multiple times or share the configuration, using CMakePresets.json is the recommended modern approach (requires CMake 3.19+).
    • Using environment variables is possible but generally the least reliable method.

    Choose the method that best fits your specific needs and CMake version. Remember that regardless of the method, the final behavior can sometimes depend on how the project's CMakeLists.txt is written.

  3. User

    Does it override the other flags?

  4. Gemini Assistant

    That's a crucial follow-up question, as the behavior isn't a simple "override."

    Setting CMAKE_C_FLAGS and CMAKE_CXX_FLAGS via -D or CMakePresets.json does not necessarily override all other flags. Instead, it typically sets the default flags that are then combined with flags added later by the project's CMakeLists.txt.

    Here's how it generally works:

    1. Your Flags (CMAKE_C_FLAGS, CMAKE_CXX_FLAGS): Flags you set this way are usually the first flags considered or added to the compiler command line.
    2. Build Type Flags (CMAKE_<LANG>_FLAGS_<BUILD_TYPE>): If you also set CMAKE_BUILD_TYPE (e.g., Release), CMake will add flags associated with that build type (e.g., -O3, -DNDEBUG). These flags are typically combined with your CMAKE_C_FLAGS/CMAKE_CXX_FLAGS.
      • Example: If you set CMAKE_CXX_FLAGS="-Ofast" and CMAKE_BUILD_TYPE=Release (which might default to -O3), the final command line for the compiler will likely include both -Ofast and -O3. Since -Ofast usually implies -O3, the -Ofast flag will effectively dominate for optimization level. However, having both is redundant but usually harmless.
    3. Project-Specific Flags (add_compile_options, target_compile_options): The CMakeLists.txt file itself can add more flags using these commands. These flags are also typically combined with the flags from steps 1 and 2.
      • Example: If the project uses add_compile_options(-Wall) to add warnings, the final command line will likely include -Ofast, -O3 (if Release), and -Wall.

    Key Points:

    • Combination is the Default: The most common behavior is that flags are combined from various sources.
    • Order Matters (Sometimes): The exact order in which flags appear on the final command line can sometimes matter, especially for conflicting flags, and this order can depend on the CMake generator. However, for optimization levels like -Ofast and -O3, the compiler usually applies the most aggressive setting specified.
    • REPLACE Keyword: A CMakeLists.txt can explicitly override flags using target_compile_options(<target> ... REPLACE ...) or add_compile_options(... REPLACE ...). If a project uses REPLACE, it will ignore previous flags for that specific scope (target or directory) and use only the flags listed with REPLACE. This is the only way the project file can truly "override" your globally set flags for a specific target.
    • Compiler Handles Conflicts: When conflicting flags are combined (like -O0 and -Ofast), the compiler usually makes a decision based on its internal rules (often the last flag wins, or more aggressive flag wins).

    In summary: Setting CMAKE_C_FLAGS="-Ofast" injects -Ofast into the compilation command lines. It doesn't typically remove flags added by the build type (-O3, -g) or by the project's CMakeLists.txt (-Wall, -Wextra, etc.) unless the project uses the REPLACE keyword. The final set of flags is usually a superset of what you set and what the project adds.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.