Skip to content
TheChatArchiveThe Chat Archive
Googlegemma-3-27b-it· GoogleHugging Face LMArena Human Preference 140K

create cmd file which will open random txt file for directory where it launched

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o4-mini-2025-04-16’s answer.
  1. User

    create cmd file which will open random txt file for directory where it launched

  2. Google Assistant
    @echo off
    setlocal
    
    :: Get the current directory
    set "current_dir=%cd%"
    
    :: Find all .txt files in the current directory
    dir /b /a-d "%current_dir%\*.txt" > temp_txt_files.txt
    
    :: Count the number of .txt files
    for /f %%a in ('type temp_txt_files.txt ^| find /c /v ""') do set "file_count=%%a"
    
    :: Check if any .txt files were found
    if %file_count% EQU 0 (
      echo No .txt files found in this directory.
      del temp_txt_files.txt
      exit /b
    )
    
    :: Generate a random number between 1 and the file count
    set /a "random_number=%random% %% %file_count% + 1"
    
    :: Read the line from the temp file corresponding to the random number
    for /f "delims=" %%a in ('type temp_txt_files.txt ^| findstr /n "^"') do (
      set "line=%%a"
      set "line_number=!line:*:="!
      if !line_number! EQU %random_number% (
        set "random_file=%%~a"
        goto :found_file
      )
    )
    
    :found_file
    
    :: Remove the line number from the filename
    set "random_file=!random_file:*:="!
    
    :: Open the random file with notepad (or your preferred text editor)
    start notepad "%current_dir%\!random_file!"
    
    :: Clean up the temporary file
    del temp_txt_files.txt
    
    endlocal
    exit /b
    

    Explanation:

    1. @echo off: Disables command echoing, so the commands themselves aren't printed to the console.
    2. setlocal: Creates a local environment. This means any environment variables set within this script will be discarded when the script finishes, preventing conflicts with the user's existing environment.
    3. set "current_dir=%cd%": Gets the current directory where the script is launched and stores it in the current_dir variable.
    4. dir /b /a-d "%current_dir%\*.txt" > temp_txt_files.txt:
      • dir: The directory command.
      • /b: Bare format - only lists the filenames, without headers or summary information.
      • /a-d: Lists all files except directories.
      • "%current_dir%\*.txt": Specifies the files to list (all .txt files in the current directory).
      • > temp_txt_files.txt: Redirects the output of the dir command to a temporary file named temp_txt_files.txt. This file will contain a list of all the .txt filenames, one per line.
    5. for /f %%a in ('type temp_txt_files.txt ^| find /c /v ""') do set "file_count=%%a":
      • for /f: Loops through the output of a command.
      • type temp_txt_files.txt: Displays the contents of the temporary file.
      • ^|: The pipe symbol. It sends the output of type to the next command. The ^ is an escape character because | has special meaning in batch files.
      • find /c /v "": Counts the number of lines in the input. /c counts lines, and /v "" means "find lines that don't contain an empty string" (which effectively counts all lines).
      • set "file_count=%%a": Sets the file_count variable to the number of lines (i.e., the number of .txt files).
    6. if %file_count% EQU 0 (...): Checks if any .txt files were found. If not, it displays a message and exits.
    7. set /a "random_number=%random% %% %file_count% + 1":
      • set /a: Performs arithmetic calculations.
      • %random%: A built-in variable that returns a random number between 0 and 32767.
      • %%: The modulo operator (remainder after division). %random% %% %file_count% gives a random number between 0 and file_count - 1.
      • + 1: Adds 1 to the result, so the random number is between 1 and file_count.
    8. for /f "delims=" %%a in ('type temp_txt_files.txt ^| findstr /n "^"') do (...): This loop iterates through the temp_txt_files.txt file, adding line numbers to each line.
      • findstr /n "^": Finds lines that start with the beginning of the line (^) and prepends the line number, separated by a colon. For example, a line might become "1:filename.txt".
      • delims=: Sets the delimiter to nothing, so the entire line is assigned to the variable %%a.
    9. set "line=%%a": Stores the current line (with line number) in the line variable.
    10. set "line_number=!line:*:="!: Extracts the line number from the line variable. The !line:*:="! syntax uses variable substitution to replace everything up to and including the first colon (:) with nothing, leaving only the line number. The ! is used for delayed expansion (see notes below).
    11. if !line_number! EQU %random_number% (...): Compares the extracted line number to the generated random number. If they match, it means we've found the line corresponding to the random file.
    12. set "random_file=%%~a": Stores the filename (without the line number) in the random_file variable. %%~a extracts the filename from the full path.
    13. goto :found_file: Jumps to the :found_file label to exit the loop once the random file is found.
    14. :found_file: A label that marks the point to jump to.
    15. set "random_file=!random_file:*:="!: Removes the line number from the filename.
    16. start notepad "%current_dir%\!random_file!":
    • start: Starts a new process.
    • notepad: The program to start (Notepad). You can change this to your preferred text editor.
    • "%current_dir%\!random_file!": The full path to the random .txt file.
    1. del temp_txt_files.txt: Deletes the temporary file.
    2. endlocal: Ends the local environment, discarding the variables set within the script.
    3. exit /b: Exits the script.

    How to use:

    1. Save the code: Copy the code above and save it as a .cmd file (e.g., open_random_txt.cmd).
    2. Place the file: Put the .cmd file in the directory where you want to open random .txt files from.
    3. Run the file: Double-click the .cmd file to execute it.

    Important Notes:

    • Delayed Expansion: The ! characters around line_number are crucial for delayed expansion. In batch files, variables are expanded at the beginning of a block of code (like a for loop). Without delayed expansion, the line_number variable would only be expanded once, at the beginning of the loop, and would not update correctly within the loop. setlocal enabledelayedexpansion would be needed if you wanted to use !line_number! everywhere, but this script only needs it in the if statement.
    • Text Editor: The script uses notepad to open the files. If you prefer a different text editor, change notepad to the executable name of your editor (e.g., wordpad, subl, code). Make sure the editor is in your system's PATH, or specify the full path to the executable.
    • Error Handling: The script includes basic error handling to check if any .txt files are found. You could add more robust error handling if needed.
    • File Paths with Spaces: The script handles file paths with spaces correctly because it uses double quotes around the paths.
    • Temporary File: The script creates a temporary file (temp_txt_files.txt). This file is deleted at the end of the script. If the script is interrupted before it can delete the file, you may need to delete it manually.
    • Permissions: Make sure you have the necessary permissions to read the .txt files and execute the text editor.
    • Alternative Text Editors: If you want to use an editor that doesn't accept a filename as a command-line argument, you'll need to modify the start command to use a different method of opening the file (e.g., using the editor's scripting interface).

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.