Skip to content
TheChatArchiveThe Chat Archive
Coherecommand-a-03-2025· CohereHugging Face LMArena Human Preference 140K

Failed to validate prompt for output 284: * (prompt): - Return type mismatch between…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Mistralmistral-small-3.1-24b-instruct-2503’s answer.
  1. User

    Failed to validate prompt for output 284:

    • (prompt):
      • Return type mismatch between linked nodes: width, received_type(INT) mismatch input_type(WIDTH)
      • Required input is missing: ckpt_name
      • Value 512 bigger than max of 100: quality_jpeg_or_webp
      • Return type mismatch between linked nodes: height, received_type(INT) mismatch input_type(HEIGHT)
      • Required input is missing: ckpt_hash
      • Failed to convert an input value to a INT value: seed, None, int() argument must be a string, a bytes-like object or a real number, not 'NoneType'
    • LoraLoader 288:
      • Required input is missing: lora_name
    • VAELoader 321:
      • Value not in list: vae_name: 'sdxl_vae.safetensors' not in ['taesd', 'taesdxl', 'taesd3', 'taef1']
    • Save Image w/Metadata 284:
      • Return type mismatch between linked nodes: width, received_type(INT) mismatch input_type(WIDTH)
      • Required input is missing: ckpt_name
      • Value 512 bigger than max of 100: quality_jpeg_or_webp
      • Return type mismatch between linked nodes: height, received_type(INT) mismatch input_type(HEIGHT)
      • Required input is missing: ckpt_hash
      • Failed to convert an input value to a INT value: seed, None, int() argument must be a string, a bytes-like object or a real number, not 'NoneType' Output will be ignored Prompt executed in 7.76 seconds

    뭐ㅏㄴ에러야

  2. Cohere Assistant

    이 오류 메시지는 여러 컴포넌트(노드)에서 발생한 다양한 문제를 나타내고 있습니다. 각 오류를 하나씩 분석해 보겠습니다:

    1. 공통 오류 (Prompt 및 Save Image w/Metadata 284)

    • Return type mismatch between linked nodes: width, received_type(INT) mismatch input_type(WIDTH)

      • width 입력이 정수(INT)로 전달되었지만, 해당 노드에서는 WIDTH 타입을 기대하고 있습니다. 타입 변환이 필요하거나, 입력 값을 확인해야 합니다.
    • Required input is missing: ckpt_name

      • ckpt_name (체크포인트 이름)이 누락되었습니다. 이 값을 반드시 입력해야 합니다.
    • Value 512 bigger than max of 100: quality_jpeg_or_webp

      • quality_jpeg_or_webp 값이 512로 설정되어 있지만, 최대 허용 값은 100입니다. 이 값을 100 이하로 조정해야 합니다.
    • Return type mismatch between linked nodes: height, received_type(INT) mismatch input_type(HEIGHT)

      • height 입력이 정수(INT)로 전달되었지만, 해당 노드에서는 HEIGHT 타입을 기대하고 있습니다. width와 동일한 문제로, 타입 변환이나 입력 값을 확인해야 합니다.
    • Required input is missing: ckpt_hash

      • ckpt_hash (체크포인트 해시)가 누락되었습니다. 이 값을 반드시 입력해야 합니다.
    • Failed to convert an input value to a INT value: seed, None, int() argument must be a string, a bytes-like object or a real number, not 'NoneType'

      • seed 값이 None으로 전달되어 정수로 변환할 수 없습니다. seed 값을 유효한 정수나 문자열로 설정해야 합니다.

    2. LoraLoader 288

    • Required input is missing: lora_name
      • lora_name (LoRA 모델 이름)이 누락되었습니다. 이 값을 반드시 입력해야 합니다.

    3. VAELoader 321

    • Value not in list: vae_name: 'sdxl_vae.safetensors' not in ['taesd', 'taesdxl', 'taesd3', 'taef1']
      • vae_name으로 'sdxl_vae.safetensors'가 입력되었지만, 허용된 값은 ['taesd', 'taesdxl', 'taesd3', 'taef1']뿐입니다. 허용된 값 중 하나로 변경해야 합니다.

    해결 방안

    1. 타입 불일치 문제 해결:
      width와 height가 정수(INT)로 전달되고 있다면, 해당 노드에서 이를 WIDTH와 HEIGHT 타입으로 변환할 수 있도록 설정하거나, 입력 값을 확인하세요.

    2. 누락된 입력 값 추가:
      ckpt_name, ckpt_hash, lora_name을 반드시 입력하세요.

    3. quality_jpeg_or_webp 값 조정:
      512 대신 100 이하로 설정하세요.

    4. seed 값 유효성 확인:
      seed를 None이 아닌 유효한 정수나 문자열로 설정하세요.

    5. vae_name 값 수정:
      'sdxl_vae.safetensors' 대신 허용된 값('taesd', 'taesdxl', 'taesd3', 'taef1') 중 하나로 변경하세요.

    이러한 수정 사항을 적용하면 오류가 해결될 것입니다.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.