Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro· GoogleHugging Face LMArena Human Preference 140K

I would like to create a script on my synology nas, to save disc temperature every 1…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-5-haiku-20241022’s answer.
  1. User

    I would like to create a script on my synology nas, to save disc temperature every 1 minute to a file, with 5 columns per row (each temp is for another HDD): datetime, temp1, temp2, temp3, temp4

  2. Gemini Assistant

    Of course! This is a great way to monitor the health of your hard drives over time. Here is a complete guide to creating the script and setting it up to run automatically on your Synology NAS.

    We will break this down into three main steps:

    1. Creating the script that fetches the temperatures.
    2. Placing the script on your NAS and making it executable.
    3. Scheduling the script to run every minute using Synology's Task Scheduler.

    Step 1: The Script

    This shell script uses the smartctl command, which is pre-installed on Synology DSM, to read the S.M.A.R.T. data from your drives.

    Here is the script. You can copy and paste this into a text file.

    #!/bin/bash
    
    # --- Configuration ---
    # 1. Set the full path to where you want to save the CSV log file.
    #    It's best to use a shared folder, e.g., /volume1/data/disk_temps.csv
    OUTPUT_FILE="/volume1/docker/scripts/disk_temps.csv"
    
    # 2. List the device names for your hard drives.
    #    Find these in Storage Manager or by running 'cat /proc/partitions' in an SSH session.
    #    Common names are /dev/sda, /dev/sdb, etc. For NVMe drives, they look like /dev/nvme0n1.
    #    This example is for a 4-drive system. Adjust it to your needs.
    DISKS=("/dev/sda" "/dev/sdb" "/dev/sdc" "/dev/sdd")
    
    # --- Script Logic (No need to edit below this line) ---
    
    # Create the directory for the output file if it doesn't exist
    mkdir -p "$(dirname "$OUTPUT_FILE")"
    
    # Check if the file exists. If not, create it and write the header row.
    if [ ! -f "$OUTPUT_FILE" ]; then
        # Create the header row based on the number of disks
        HEADER="datetime"
        i=1
        for disk in "${DISKS[@]}"; do
            HEADER="$HEADER,temp$i"
            i=$((i+1))
        done
        echo "$HEADER" > "$OUTPUT_FILE"
    fi
    
    # Get the current timestamp in a nice format (YYYY-MM-DD HH:MM:SS)
    TIMESTAMP=$(date +"%Y-%m-%d %H:%M:%S")
    
    # Initialize the line with the timestamp
    LINE="$TIMESTAMP"
    
    # Loop through each disk in the DISKS array
    for disk in "${DISKS[@]}"; do
        # Get temperature from smartctl.
        # We grep for 'Temperature_Celsius' and use awk to get the 10th column, which is the raw value.
        TEMP=$(smartctl -A "$disk" | grep 'Temperature_Celsius' | awk '{print $10}')
        
        # If TEMP is empty (e.g., disk is in standby), use "N/A" as a placeholder.
        TEMP=${TEMP:-"N/A"}
        
        # Append the temperature to our line, prefixed with a comma
        LINE="$LINE,$TEMP"
    done
    
    # Append the completed line to the output file
    echo "$LINE" >> "$OUTPUT_FILE"
    
    exit 0
    

    Step 2: Place and Prepare the Script on Your NAS

    1. Save the Script: Copy the code above and save it in a plain text file. Name it something like log_temps.sh.

    2. Find Your Disk Names (Important!): You need to know the system names of your drives.

      • The easiest way is to SSH into your NAS and run the command cat /proc/partitions. You will see a list of devices like sda, sdb, etc.
      • Alternatively, you can often deduce them from their order in Storage Manager.
      • Edit the DISKS array in your log_temps.sh file to match your system. If you have 2 drives, it would be DISKS=("/dev/sda" "/dev/sdb").
    3. Upload the Script:

      • Open File Station on your Synology DSM.
      • Navigate to a shared folder where you want to store your scripts. A good practice is to create a dedicated folder, for example, in the docker share (if you have it) or create a new share called scripts. Let's assume you place it in /volume1/docker/scripts/.
      • Upload your edited log_temps.sh file to this location.
    4. Make the Script Executable:

      • You need to give the system permission to run this file. The easiest way is via SSH.
      • Enable SSH on your NAS: Control Panel > Terminal & SNMP > Terminal > Check Enable SSH service.
      • Connect to your NAS using an SSH client (like PuTTY for Windows or Terminal for macOS/Linux) with your admin credentials.
      • Navigate to the directory where you uploaded the script:
        cd /volume1/docker/scripts/
        
      • Run the following command to make it executable:
        chmod +x log_temps.sh
        

    Step 3: Schedule the Script in Task Scheduler

    Now we'll tell Synology to run this script automatically every minute.

    1. Go to Control Panel > Task Scheduler.

    2. Click Create > Scheduled Task > User-defined script.

    3. General Tab:

      • Task: Give it a descriptive name, like Log Disk Temperatures.
      • User: Select root. This is important as smartctl requires root privileges to access the drives.
      • Enabled: Make sure this is checked.
    4. Schedule Tab:

      • Run on the following days: Check Daily.
      • Time section:
        • First run time: 00:00
        • Frequency: Run every
        • Set to 1 minute.
    5. Task Settings Tab:

      • Under User-defined script, you need to enter the command to run your script. It's important to use the full path.
      • Enter the following (adjust the path if you saved your script elsewhere):
        /bin/bash /volume1/docker/scripts/log_temps.sh
        
    6. Click OK to save the task.

    Checking the Output

    To make sure everything is working, you can select the task in Task Scheduler and click Run.

    After a minute, navigate to the location you specified in the OUTPUT_FILE variable (e.g., /volume1/docker/scripts/). You should see a file named disk_temps.csv.

    If you open it, its content will look like this:

    datetime,temp1,temp2,temp3,temp4
    2023-10-27 15:30:01,34,35,34,36
    2023-10-27 15:31:01,34,35,34,36
    2023-10-27 15:32:02,35,35,34,37
    

    This CSV file can now be easily opened in any spreadsheet program like Excel or Google Sheets to graph your disk temperatures over time.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.