I have a compressed sensing problem where I am designing a physical linear…
- User
I have a compressed sensing problem where I am designing a physical linear transformation \Phi for an incoherent imaging problem, transforming from input field tensor (flattened) with shape (nx, ny, nwvl) to an output sensor field (also flattened) with shape (nx, ny) by convolving each spatial slice with a different PSF at each frequency, and summing at each monochromatic pixel. I have two schemes for optimizing the transformation for optimal recovery in a sparse basis \Psi. One is minimizing the total coherence, formed by the sum of A_norm^T A_norm where A = \Phi \Psi and A_norm is formed by the normalized columns of A. The other is maximizing: log det(1+A^T A). Currently for few wavelengths, the optimization for both methods converges towards a diffraction limited focusing phase aperture for seemingly any choice of basis \Psi. I believe this to be a result of having many more combinations of non spatially overlapping columns of A vs. spatially overlapping at different wavelengths, and therefore the optimization favours the many over the few, resulting in the optimal phase for a single wavelength slice (diffraction limited pattern). My question is how to increase the weightings of the inner products between the latter in order to avoid this “trivial” focusing aperture function?
Assistant
This is a fascinating problem, and your hypothesis about the optimization converging to a single-wavelength diffraction-limited solution due to a mismatch in "information density" or "complexity" between spatial and spectral aspects is very insightful. You're hitting on a core challenge in snapshot spectral imaging or any compressed sensing system where multiple data dimensions are collapsed into fewer measurements.
Let's break down why this happens and then explore solutions to "increase the weightings of the inner products between the latter" (i.e., columns of that are spatially overlapping but spectrally distinct).
Why the "Trivial" Solution Appears
Your current setup transforms a 3D input (nx, ny, nwvl) to a 2D output (nx, ny) via convolution and summation. This is a severe undersampling in the spectral dimension.
- Dominance of Spatial Information: In typical imaging problems, the spatial resolution (number of pixels nx * ny) is much larger than the number of wavelengths (nwvl). If your basis has many more spatial modes than spectral modes, or if the spectral modes get heavily mixed by , the optimization naturally prioritizes what it can optimize best: the spatial quality.
- Spectral Conflation by Summation: The operation "summing at each monochromatic pixel" directly collapses the spectral dimension. If (the PSF for wavelength ) are not sufficiently distinct or designed to encode spectral information, then two input signals that are spatially identical but spectrally different (e.g., a point source at vs. a point source at ) will produce very similar output patterns if .
- Optimization Objectives' Blind Spots:
- Minimizing total coherence ( where are normalized columns of ): This objective wants all columns of to be as orthogonal as possible. If makes spectrally distinct inputs produce nearly identical outputs, those resulting columns will be highly correlated, leading to high coherence. The optimization might find it "easier" to achieve low coherence by making essentially identical (e.g., diffraction limited at one wavelength), thereby effectively reducing the dimensionality of the problem by ignoring the spectral diversity altogether, making the remaining spatial components more distinguishable.
- Maximizing : This aims to maximize the information captured by the measurements about the sparse coefficients. If the spectral dimension is collapsed, the effective rank of with respect to spectral information becomes very low. The optimization might find that maximizing the determinant is best achieved by having very distinct spatial mappings, even if it means sacrificing spectral distinguishability. For instance, if two spectrally distinct basis vectors and map to nearly identical and , this effectively reduces the useful rank of , impacting . The optimization might see a "good" solution as one where the measurement matrix is well-conditioned for spatial recovery, even if it's ill-conditioned for spectral recovery.
Strategies to Encourage Spectral Diversity in
The core idea is to force to encode spectral information into the spatial measurements, rather than just collapse it. This requires either modifying your objective functions to explicitly penalize spectral conflation or changing the physical interpretation of your PSFs and the measurement process.
1. Modify the Objective Function: Introduce Specific Spectral Penalties
This is the most direct way to "increase the weightings of the inner products between the latter."
-
Targeted Coherence Penalty (for the sum of A_norm^T A_norm objective):
- Identify pairs of basis vectors in your sparse basis that are spatially very similar (or identical) but spectrally distinct.
- Example: If is a separable basis , then a pair might be where is a specific spatial mode and .
- Add a penalty term to your objective that specifically targets the inner products (coherence) of these resulting columns in :
- The weighting factor controls how strongly you enforce spectral separation.
- This directly tells the optimizer: "These specific spectrally different signals must produce distinct measurement patterns, even if they are spatially similar."
- You might need to carefully define
SpectrallyDistinctPairsto include all relevant spectral modes.
- Identify pairs of basis vectors in your sparse basis that are spatially very similar (or identical) but spectrally distinct.
-
Spectral Feature Discriminability Penalty (for both objectives):
- Define a linear operator that, for example, highlights certain spatial features or focuses specific parts of the image (e.g., a simple blur, a derivative filter, etc. – though this might be too general).
- A more effective approach might be to try and reconstruct the spectral content from the measurements and penalize errors. This brings you closer to end-to-end learning, which might be overkill.
- Alternative: Eigenvalue Spread of Spectrally-Relevant Subspace:
- Consider a subset of columns of corresponding to spectrally-varying basis vectors (e.g., for a fixed spatial mode ).
- Add a term that encourages these columns to form a high-rank, well-conditioned subspace. For example, maximize , or minimize the condition number of . This is similar to the objective but applied to a specific subspace.
- This explicitly tries to ensure that the spectral information within each spatial mode is well-preserved.
2. Rethink the Physical Transformation : Spatial-Spectral Multiplexing
Your current formulation ("convolving each spatial slice with a different PSF at each frequency, and summing") implies that each pixel on the sensor is a simple sum of convolved images from different wavelengths. This is the bottleneck.
To truly encode spectral information, you need spatially varying spectral filtering, also known as spatial-spectral multiplexing. This means your "PSF at each frequency" is not just a uniform convolution kernel for that wavelength, but also encodes information in the spatial domain that helps disambiguate wavelengths.
Common architectures for this in snapshot spectral imaging include:
-
Coded Aperture Snapshot Spectral Imagers (CASSI):
- Light from the scene passes through a coded aperture (a spatial mask that varies intensity, often binary or grayscale).
- It then passes through a dispersive element (prism or grating) that spreads different wavelengths to different spatial locations.
- Finally, it's recorded on a 2D sensor.
- How this relates to your : In this setup, your effective for each wavelength would be a spatially-shifted and perhaps spatially-filtered version of the common system PSF, where the shift depends on the wavelength and the dispersion. The "convolution" is no longer just a simple blurring, but includes a spatial encoding.
- The output would then be a sum over wavelengths of the dispersed, coded, and convolved input fields. The structure of these functions (which would no longer be just simple spatial kernels but rather a combination of the coded aperture pattern and the dispersion properties) would be optimized.
- Your would essentially be designed by choosing the coded aperture pattern. The different would arise naturally from the interaction of the fixed coded aperture with the variable dispersion.
-
Spatially-varying filters / Filter arrays:
- Instead of a single coded aperture, you could imagine a filter array where different spatial regions of your optical element apply different spectral filters. For example, a "patchwork" of narrowband filters, or continuously varying filters.
- This is harder to represent as a single, simple convolution per wavelength. The matrix would become block-diagonal (for different spatial regions) with each block representing the distinct wavelength-dependent filter.
Recommendation for Design: If you are truly designing a physical linear transformation, consider a design space for that allows for spatial-spectral encoding.
- Instead of , where is a simple PSF, think about: where is a wavelength-specific spatial coding mask and is a common system PSF. Your optimization would then be over the parameters of or a single combined mask for all wavelengths (as in CASSI). This requires a more sophisticated optical model for .
3. Refine the Sparse Basis
While not directly about , the choice of influences significantly.
- Ensure Spectral Diversity in : Make sure your sparse basis has sufficient representation of spectral variations. If is primarily spatially oriented (e.g., only spatial wavelets applied identically across all wavelengths), then will mostly reflect spatial information, and the optimization will naturally focus there.
- Separable Bases: If is a Kronecker product of a spatial basis and a spectral basis (), it makes it easier to identify "spatially similar, spectrally distinct" pairs for objective function penalties.
Summary and Actionable Steps
-
Prioritize Spectral Disambiguation: The core problem is that your current formulation (or its optimization outcome) treats different wavelengths as too similar in the final measurement space. You need to explicitly encourage to make them distinguishable.
-
Implement Targeted Penalties (Easier to start):
- For the coherence objective, add a weighted penalty for where and are spatially similar but spectrally distinct.
- For the objective, add a term that maximizes the determinant of a submatrix of (or similar) corresponding to spectrally-distinguishing components.
-
Consider a More Sophisticated (More impactful, but harder):
- If possible, incorporate principles from snapshot compressive spectral imaging (e.g., coded apertures, dispersion) into your model of . This allows to intrinsically encode spectral information into spatial patterns. Your "PSF at each frequency" would then become a more complex function that includes the spatial encoding unique to that wavelength. This is often the most effective solution for multi-spectral CS.
By modifying the objective function to directly penalize spectral conflation, or by designing a that inherently performs spatial-spectral multiplexing, you can guide your optimization away from the "trivial" diffraction-limited solution and towards one that prioritizes robust multi-spectral recovery.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.