Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash· GoogleHugging Face LMArena Human Preference 140K

In UE5, how can I stop a sequence in the middle, and reset all parameters to the way…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with o4-mini-2025-04-16’s answer.
  1. User

    In UE5, how can I stop a sequence in the middle, and reset all parameters to the way they were before the sequence began?

  2. Gemini Assistant

    In Unreal Engine 5, stopping a sequence in the middle and resetting all parameters to their initial state involves two primary steps: stopping the sequence playback and then explicitly restoring the pre-animated state of the actors and properties it influenced.

    UE5 has a built-in mechanism for this, which is the most common and recommended approach.


    The Recommended Method: Stop() and Restore Pre-Animated State

    When a sequence plays, it overrides the properties of actors in the level. When it stops, those properties remain at their last animated value. To revert them, you need to tell the Level Sequence Player to restore the state.

    1. Stop the Sequence: Call the Stop function on your Level Sequence Player.

    2. Restore Pre-Animated State: Call the Restore Pre-Animated State function on your Level Sequence Player. This function tells the engine to revert the modified properties of actors back to what they were before the sequence began playing.


    Step-by-Step Blueprint Implementation

    Let's assume you're playing a sequence from an Actor Blueprint or the Level Blueprint.

    1. Get a Reference to the Level Sequence Player: When you use the Play Sequence node (often triggered from a Level Sequence Actor or directly playing a Level Sequence asset), it outputs a Level Sequence Player reference. It's crucial to store this reference so you can control it later.

      • From a Level Sequence Actor: If you dragged a Level Sequence from the Content Browser into your level, it becomes a Level Sequence Actor. You can get a reference to this actor and then call Get Sequence Player on it.
      • From the Play Sequence node: The simplest way is to promote the return value of the Play Sequence node to a variable.
    2. Blueprint Setup Example:

      Imagine you have a button or an event that starts your sequence, and another button/event that stops it and resets.

      // --- PART 1: Playing the Sequence and Storing the Player ---
      
      // Event: e.g., OnComponentBeginOverlap, or a Custom Event like "PlayMySequence"
      (Any Trigger Event) -- (Sequence Player Variable SET Node)
          |                                        |
          V                                        V
      [Play Sequence (Target: Level Sequence Asset)] --> [Set CurrentSequencePlayer (Variable)]
          ^
          | (Target: If you're playing a direct Level Sequence Asset.
          |  Alternatively, if you have a Level Sequence Actor in the level,
          |  get a reference to it and use "Get Sequence Player" instead.)
          |
      [Level Sequence Asset Reference]
      
      // --- PART 2: Stopping and Resetting the Sequence ---
      
      // Event: e.g., A button press, or a Custom Event like "StopAndResetMySequence"
      (Any Stop Trigger Event)
          |
          V
      [CurrentSequencePlayer (GET Node)]
          |
          V
      [IsValid? (Optional, but good practice to check if player exists)]
          |  (If True)
          V
      [Stop (Target: CurrentSequencePlayer)]
          |
          V
      [Restore Pre-Animated State (Target: CurrentSequencePlayer)]
          |
          V
      [Optional: Set CurrentSequencePlayer to Null/None] // Clear the variable if it's no longer needed
      

      Explanation of Restore Pre-Animated State Node:

      • Target: This should be your Level Sequence Player variable.
      • Type (Enum: ESequenceRestoreState):
        • All: This is what you want. It restores all animated properties, including transforms, material parameters, visibility, etc.
        • AnimationOnly: Restores only the explicitly animated properties without reverting other changes the sequence might have implicitly caused. Less common for a full reset.

    Alternative: Auto Restore State (Sequence Asset Setting)

    You can configure your Level Sequence Asset to automatically restore the state when it stops or finishes. This is very convenient for scenarios where you want this behavior consistently.

    1. Open your Level Sequence Asset: Double-click on your .uasset Level Sequence in the Content Browser.
    2. Go to Details Panel: In the Sequencer editor, look for the Details panel (usually on the right).
    3. Find Auto Restore State: Under the Playback section, you'll find the Auto Restore State dropdown.
    4. Set to Stop:
      • Disable: Never restores automatically.
      • Stop: Restores state when the sequence finishes playing naturally or when the Stop() function is called on the Level Sequence Player. This is usually the setting you want.
      • Complete: Restores state only when the sequence plays through to its end without being explicitly stopped.
      • Play: Restores state when the sequence starts playing (i.e., reverts previous state before the new playback).

    If you set Auto Restore State to Stop on your Level Sequence Asset, you only need to call Stop() in your Blueprint, and the engine will handle the Restore Pre-Animated State call automatically.


    Important Considerations / Edge Cases:

    1. Spawned Actors: If your sequence spawns actors (e.g., using a Spawn Track), Restore Pre-Animated State will not automatically destroy them. You will need to explicitly destroy these spawned actors in your Blueprint after restoring the state, if that's desired.

      // ... after Restore Pre-Animated State
      [CurrentSequencePlayer (GET)] --> [Get Bound Objects] --> (For Each Loop) --> [Destroy Actor]
      

      Note: Get Bound Objects will return all objects bound in the sequence, including those spawned. You might need logic to identify only the spawned ones if you don't want to destroy all bound objects.

    2. Destroyed Actors: Similarly, if your sequence destroys actors, Restore Pre-Animated State will not respawn them. You would need custom logic to respawn those actors if they were destroyed by the sequence and need to be present again.

    3. External Modifications: Restore Pre-Animated State primarily reverts changes made by the sequence. If an actor's properties were also modified by other Blueprint logic or physics simulations during the sequence's playback, restoring the state might not perfectly account for those external changes. However, it's generally very robust for direct sequence modifications.

    4. Performance: For very complex sequences affecting many actors, there might be a slight hitch when Restore Pre-Animated State is called, as it needs to iterate and revert properties. For most cases, this is negligible.


    By leveraging the Stop() function and especially Restore Pre-Animated State (either manually or via Auto Restore State setting), you can effectively stop and reset your sequences in UE5.

  3. User

    Would increasing the speed of a sequence to a practically infinite rate work well? What sort of things would I need to take into consideration for this?

  4. Gemini Assistant

    Increasing the playback speed of a Level Sequence in UE5 to a "practically infinite" rate (e.g., 1000x, 10000x, or higher) will effectively cause the sequence to jump almost instantaneously from its current state to its final state.

    However, it's crucial to understand what this means and what considerations come into play, as it's not really "playing" an animation but rather "teleporting" properties.


    What "Infinite Speed" Achieves (Instant State Change):

    At an extremely high playback rate, the Level Sequence Player will attempt to advance the sequence by many frames within a single game tick. Since the engine can only render a frame and update physics once per tick (at your target framerate), it won't actually render every intermediate frame. Instead, it will:

    1. Calculate the Final State within the Tick: The sequence will jump to the point it should be at based on the extreme play rate and the elapsed delta time.
    2. Apply Properties Directly: It will apply the interpolated or keyframed values for that advanced point directly to the bound actors.

    Essentially, you're using the sequence as a complex way to instantly set a set of properties to a predefined end state.


    Considerations and What It Won't Do Well:

    1. Visual Smoothness (Non-Existent):

      • You will not see any animation or interpolation between keyframes. The objects will simply pop to their new positions, rotations, scales, material states, etc. This is the most obvious and intended consequence.
    2. Event Tracks and Notifies (Likely Skipped):

      • This is a major one. Events (like Trigger Event tracks, Play Sound tracks, Spawn Actor tracks, or Anim Notifies on Skeletal Mesh animation tracks) that are precisely timed on intermediate frames will very likely be skipped.
      • The sequence might only trigger events that land exactly on the start or end of the very large time step it's taking within a tick. If you have an event on frame 10 and another on frame 20, and the sequence jumps from frame 0 to frame 100 in one tick, neither event will fire.
      • Exception: Events at the very beginning or very end of the sequence might fire if the "jump" encompasses them.
    3. Audio Tracks (Unusable):

      • Audio will be garbled, cut off, or simply not play. You can't compress a 30-second audio clip into 0.001 seconds and expect it to be audible.
    4. Physics and Collision Detection (Tunnelling):

      • If animated objects interact with physics, very high speeds will cause severe tunnelling. Objects will simply pass through others without registering collisions because the discrete steps they take are too large to detect contact.
      • Even if not using explicit physics, if your game logic relies on objects moving through space to trigger events (e.g., volume overlaps), those intermediate triggers will be missed.
    5. Particle Systems (Instant Burst, then End State):

      • Particle systems will typically emit their initial burst (if configured) and then instantly resolve to their final animated state (e.g., off, or a specific sustained state). You won't see the full particle effect play out.
    6. Level Streaming (Potential Hitches):

      • If your sequence triggers level streaming (loading or unloading parts of the level), it might not complete fast enough to avoid hitches or visible pop-in. Streaming needs time to load assets from disk.
    7. Resource Loading (Pop-in):

      • Similarly, if the sequence changes visibility or materials of complex objects that require new textures or meshes to be streamed in, you might see noticeable pop-in as resources load.
    8. Garbage Collection Overhead (Minor but Possible):

      • If your sequence spawns and destroys many actors very rapidly, the burst of garbage collection operations might cause a tiny hitch, although modern GCs are very optimized.
    9. Debugging Complexity:

      • Debugging issues with a sequence playing at extreme speeds can be difficult because you can't step through the animation visually. You'll rely solely on printed debug messages to confirm events or state changes.
    10. Editor vs. Runtime Performance:

      • In the editor, especially with Play In Editor (PIE), performance might vary compared to a cooked game. Ensure you test in a build if this is critical.

    When This Approach Might Be Considered:

    • Instant Scene Reset/Transition: You want to quickly "snap" a scene or specific actors to a predefined configuration without seeing the animation. This is an alternative to manually setting every property in Blueprint.
    • Rapid State Cycling: You need to cycle through a few distinct visual states very quickly for testing or specific visual effects where the intermediate animation isn't desired.
    • Using Sequencer as a "Preset Saver": You use Sequencer to design a complex arrangement of properties and then use the high play rate to instantly apply that "preset."

    Better Alternatives for Instant State Change:

    If your goal is purely to instantly change properties to the end state of a sequence, there are often more direct and reliable methods:

    1. Set Playback Position:

      • Use the Set Playback Position node on your Level Sequence Player and set the position directly to the End Time of the sequence. This achieves the same instantaneous jump to the final state without any "playback" in between. It's cleaner and more explicit.
      [LevelSequencePlayer] -- [Set Playback Position] -- (Position: End Time of Sequence)
      
      • You can get the End Time from the Level Sequence Player or the Level Sequence asset itself.
    2. Direct Blueprint Property Setting:

      • If the sequence is only setting a few properties on a few actors, it might be simpler and more performant to just have a Blueprint function that directly sets those properties when triggered. This avoids the overhead of the sequencer system entirely if animation isn't needed.
    3. Stop and Restore Pre-Animated State (if applicable):

      • If you're only trying to reset from an animated state, Stop followed by Restore Pre-Animated State (or setting Auto Restore State on the sequence) is the correct way to revert to the pre-sequence configuration.

    In conclusion: While "increasing the speed to practically infinite" will technically jump to the end state, it's a brute-force method that introduces issues with events, audio, and physics. For achieving an instant transition to a sequence's end state, Set Playback Position is generally the more robust and understandable approach.

  5. User

    For the sequence in question, I usually have it change several things at the beginning of the sequence and slowly restore them to their original values by the end using keyframing and event triggering. What is the best way to abort the sequence in the middle and ensure it returns to it's original state?

  6. Gemini Assistant

    You've perfectly described a common scenario where Restore Pre-Animated State is precisely what you need!

    The best and most reliable way to achieve this is to use the Restore Pre-Animated State function on your Level Sequence Player. This function tells the engine to revert all properties (transforms, material parameters, visibility, etc.) of actors that were affected by the sequence back to the values they had before the sequence began playing.

    Here's the breakdown of the best approaches:


    Method 1: Using Auto Restore State (Recommended for Simplicity)

    This is the easiest way if you want this behavior consistently for a given sequence.

    1. Open your Level Sequence Asset: Double-click your .uasset Level Sequence in the Content Browser to open the Sequencer editor.
    2. Go to Details Panel: In the Sequencer editor, find the Details panel (usually on the right).
    3. Find Auto Restore State: Under the Playback section, you'll see the Auto Restore State dropdown.
    4. Set to Stop:
      • Disable: Never restores automatically.
      • Stop: Restores the pre-animated state when the sequence finishes playing naturally or when the Stop() function is called on the Level Sequence Player. This is the setting you want.
      • Complete: Only restores state if the sequence plays through to its absolute end.
      • Play: Restores state just before the sequence starts playing.

    Blueprint Implementation if Auto Restore State is Stop:

    If you've set Auto Restore State to Stop on your Level Sequence Asset, your Blueprint simply needs to call Stop():

    // --- PART 1: Playing the Sequence and Storing the Player ---
    // (You'll already have this setup)
    (Any Trigger Event, e.g., "PlaySequenceEvent")
        |
        V
    [Play Sequence (Target: Level Sequence Asset)] --> [Set CurrentSequencePlayer (Variable)]
    
    // --- PART 2: Stopping and Resetting the Sequence ---
    // (When you want to abort and reset)
    (Any Stop Trigger Event, e.g., "AbortSequenceEvent")
        |
        V
    [CurrentSequencePlayer (GET Node)]
        |
        V
    [IsValid? (Optional, good practice)]
        |  (If True)
        V
    [Stop (Target: CurrentSequencePlayer)] // This will automatically trigger "Restore Pre-Animated State"
    

    Method 2: Manual Blueprint Control (For Fine-Grained Control or Overriding Defaults)

    If you prefer to explicitly control the restoration in Blueprint, or if you can't modify the Level Sequence Asset's Auto Restore State for some reason, you can call Restore Pre-Animated State directly.

    Blueprint Implementation:

    // --- PART 1: Playing the Sequence and Storing the Player ---
    // (Same as above)
    (Any Trigger Event, e.g., "PlaySequenceEvent")
        |
        V
    [Play Sequence (Target: Level Sequence Asset)] --> [Set CurrentSequencePlayer (Variable)]
    
    // --- PART 2: Stopping and Resetting the Sequence ---
    // (When you want to abort and reset)
    (Any Stop Trigger Event, e.g., "AbortSequenceEvent")
        |
        V
    [CurrentSequencePlayer (GET Node)]
        |
        V
    [IsValid? (Optional, good practice)]
        |  (If True)
        V
    [Stop (Target: CurrentSequencePlayer)]
        |
        V
    [Restore Pre-Animated State (Target: CurrentSequencePlayer)]
        |   (Type: ESequenceRestoreState, set to "All")
        V
    [Optional: Set CurrentSequencePlayer to Null/None] // Clear the variable if it's no longer needed
    

    Explanation of Restore Pre-Animated State Node:

    • Target: Your Level Sequence Player variable.
    • Type (Enum: ESequenceRestoreState):
      • All: This is what you almost always want for a full reset. It intelligently reverts all animated properties (transforms, material parameters, visibility, etc.) back to their original values before the sequence took control.
      • AnimationOnly: Less common for a full reset; only restores explicitly animated properties.

    Important Considerations / Edge Cases:

    1. Spawned Actors: If your sequence uses a "Spawn Track" to spawn actors, Restore Pre-Animated State will not automatically destroy those spawned actors. They will remain in the world.

      • Solution: After calling Restore Pre-Animated State, you'll need to explicitly destroy any actors that were spawned by the sequence if you want them gone. You can typically get a list of bound objects from the Level Sequence Player:
        // ... after Restore Pre-Animated State
        [CurrentSequencePlayer (GET)] --> [Get Bound Objects] --> (For Each Loop)
                                                                 |
                                                                 V
                                                                [Destroy Actor]
        
        • Caution: Get Bound Objects will return all objects bound in the sequence (even pre-existing ones). You might need additional logic to identify only the spawned ones if you don't want to destroy everything the sequence touched. A common way is to tag spawned actors and only destroy those with the specific tag.
    2. Destroyed Actors: Conversely, if your sequence contains a track that destroys actors, Restore Pre-Animated State will not respawn them. They will remain destroyed.

      • Solution: If you need these actors back, you would have to implement custom Blueprint logic to respawn them after the reset. This is less common for a "return to original state" use case but good to be aware of.
    3. Event Triggers and Game State: If your sequence's "Event Track" or other parts trigger gameplay logic that modifies persistent game state (e.g., changes a player's health, updates a score, toggles a global variable, calls a custom event on another system), Restore Pre-Animated State will not undo those changes. It only reverts actor properties that were directly animated by the sequence.

      • Solution: For these types of changes, you need to implement your own "undo" or "reset" logic within your game's Blueprint systems that are called when the sequence is aborted. This often involves saving the relevant game state before the sequence starts and then restoring it manually.
    4. Physics Interaction: If your sequence animates an object and then physics takes over (e.g., an animated object pushes another, or animated object falls off a ledge), Restore Pre-Animated State will revert the animated properties, but it might not perfectly undo all physics consequences if those physics interactions led to a very different state.


    By prioritizing Auto Restore State set to Stop on your Level Sequence Asset, or by explicitly calling Stop() followed by Restore Pre-Animated State() in Blueprint, you'll effectively handle the core requirement of reverting your scene to its pre-sequence configuration. Remember to consider spawned actors and external game state changes for a complete reset!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.