Skip to content
TheChatArchiveThe Chat Archive
Qwenqwq-32b· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

I am looking for some device with a screen/display capably of displaying numbers (i.e.…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-opus-4-20250514’s answer.
  1. User

    I am looking for some device with a screen/display capably of displaying numbers (i.e. primitive display is enough). That device must be able to connect to computer or phone or wireless network. What such devices are commonly found in a big corporate offices or datacenters or network labs? I.e. I cannot just buy something, I need some existing device (may be repurposed). Please make a list

  2. Qwen Assistant

    Here’s a list of commonly found devices in big corporate offices, data centers, or network labs that have screens/displays capable of showing numbers and can connect to computers, phones, or wireless networks. These devices can often be repurposed with minimal setup:


    1. Digital Signage Displays

    • Description: Used for displaying information (e.g., schedules, messages, ads).
    • Connection: Typically connected to a network via Ethernet or Wi-Fi.
    • Repurpose: Install signage software (e.g., Crestron, Samsung MagicInfo) to display numerical data (e.g., metrics, counters).
    • Common Use: Found in lobbies, meeting rooms, or break areas.

    2. IP Phones (e.g., Cisco, Yealink, Polycom)

    • Description: Office phones with LCD screens.
    • Connection: Network-connected via Ethernet or Wi-Fi.
    • Repurpose: Use third-party apps or firmware modifications to display custom numbers (e.g., incoming alerts, sensor data).
    • Note: Some models (e.g., Yealink’s T58A) support text messaging or third-party integrations.

    3. Digital Whiteboards/Interactive Displays (e.g., SMART Board, Microsoft Surface Hub)

    • Description: Large touchscreen displays for meetings.
    • Connection: Often connected to Wi-Fi/LAN and can pair with devices.
    • Repurpose: Use apps like PowerPoint, Excel, or custom dashboards to display numerical data.
    • Common Use: Conference rooms or collaborative spaces.

    4. Networked Environmental Sensors

    • Description: Monitors temperature, humidity, or air quality in data centers.
    • Connection: May have Wi-Fi or Ethernet for remote monitoring.
    • Repurpose: Displays real-time metrics on their built-in LCD screens (e.g., Extech or Testo devices).
    • Note: Some models allow data streaming to external systems.

    5. Industrial Monitoring Displays

    • Description: Small LCD screens used for server rack monitoring or UPS status.
    • Connection: Often connected via LAN or RS-232 (with a network adapter).
    • Repurpose: Display metrics like power usage, temperature, or fault codes.
    • Common Use: Data center server rooms.

    6. Kiosks or Tablet Stands

    • Description: Mounted tablets (e.g., Samsung Galaxy Tab, iPad) used for wayfinding or information.
    • Connection: Wi-Fi-enabled and often managed via MDM software.
    • Repurpose: Install apps to display numbers (e.g., stock tickers, IoT sensor data).
    • Note: Common in lobbies or high-traffic areas.

    7. UPS Units with Network Interfaces

    • Description: Uninterruptible Power Supplies with LCD screens (e.g., APC, Eaton).
    • Connection: Some models have USB, Ethernet, or Wi-Fi for remote monitoring.
    • Repurpose: Their built-in screens can show battery status, voltage, or load percentages.
    • Note: Requires software like APC’s PowerChute to interface with networks.

    8. Protocol Analyzers or Network Monitors

    • Description: Devices like Wireshark hardware or Spirent testers with built-in screens.
    • Connection: Often Ethernet or USB.
    • Repurpose: Display packet loss, latency, or bandwidth usage metrics.
    • Common Use: Network labs for troubleshooting.

    9. Digital Clocks with Network Sync

    • Description: Network time protocol (NTP)-connected clocks with LCD/LED displays.
    • Connection: Ethernet or Wi-Fi for time sync.
    • Repurpose: Modify firmware (if possible) to display custom numerical data instead of time.
    • Note: Basic clocks may not be programmable, but IP-based models (e.g., GrandSeiko) might allow customization.

    10. Digital Photo Frames

    • Description: Wi-Fi-enabled frames for displaying images.
    • Repurpose: Use text overlays or apps to show numbers (e.g., stock prices, counters).
    • Connection: Wi-Fi or Ethernet via networked storage.
    • Common Use: Break rooms or common areas.

    11. Rack-Mounted KVM Displays

    • Description: Monitors connected to KVM switches for server management.
    • Connection: Often via VGA/USB, but some KVMs support IP access (e.g., Raritan, Avocent).
    • Repurpose: Use IP KVM features to display server metrics on a connected screen.
    • Note: Requires a network connection for remote access.

    12. IoT-enabled Smart Displays

    • Description: Devices like Amazon Echo Show or Google Nest Hub.
    • Connection: Wi-Fi-enabled and voice-controlled.
    • Repurpose: Use third-party apps to display numerical data (e.g., weather, stock prices).
    • Note: May require approval for corporate use.

    13. Industrial HMI (Human Machine Interface) Panels

    • Description: Touchscreens used in industrial settings for process control.
    • Connection: Ethernet or serial interfaces.
    • Repurpose: Program to display numerical sensor data (e.g., pressure, flow rates).
    • Common Use: Data center HVAC systems or lab equipment.

    14. VoIP Annunciators

    • Description: Annunciator panels for phone systems with LCD screens.
    • Connection: Connected to the phone system’s network.
    • Repurpose: Display call queues, extensions, or other numerical data.
    • Note: Requires integration with PBX systems (e.g., Asterisk).

    15. Test Equipment Monitors

    • Description: Devices like oscilloscopes, multimeters, or spectrum analyzers.
    • Connection: Often USB or Wi-Fi for PC connectivity.
    • Repurpose: Use their screens to display test results numerically.
    • Common Use: Network labs or engineering departments.

    Considerations for Repurposing:

    • Network Access: Ensure the device can connect to the corporate network (Wi-Fi/Ethernet).
    • Software/Hardware Limits: Some devices may need firmware modifications or third-party apps.
    • Permissions: Verify IT policies before repurposing devices (e.g., IP phones may be managed centrally).

    These devices are often overlooked but can be creatively repurposed to display numerical data without purchasing new hardware.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.