Skip to content
TheChatArchiveThe Chat Archive
Metallama-3.3-70b-instruct· MetaHugging Face LMArena Human Preference 140K

Fix my error. The headphones should work. Do not suggest using VB-Audio. Modify the…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with gpt-4.1-2025-04-14’s answer.
  1. User

    Fix my error. The headphones should work. Do not suggest using VB-Audio. Modify the code.

    --- error below

    ✅ Format supported: Microphone (Razer Seiren Mini) (2 ch, 44100 Hz) 🎙️ Recording from: Microphone (Razer Seiren Mini) (Index: 1, Channels: 2, Sample Rate: 44100 Hz) ⚠️ Note: Bluetooth devices like WH-1000XM4 may not support loopback. Consider using VB-Audio Virtual Cable (https://vb-audio.com/Cable/). ⚠️ Format not supported: Headphones (2- WH-1000XM4) (2 ch, 44100 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (1 ch, 44100 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (2 ch, 48000 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (1 ch, 48000 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (2 ch, 44100 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (1 ch, 44100 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (2 ch, 32000 Hz): ('Invalid number of channels', -9998) ⚠️ Format not supported: Headphones (2- WH-1000XM4) (1 ch, 32000 Hz): ('Invalid number of channels', -9998) ❌ Speaker format not supported: Headphones (2- WH-1000XM4) (0 ch, 44100 Hz) 🔈 Disabling speaker recording 🔄 Starting capture loop... 🔄 Loop iteration 1, recording=True

    --- code begins

    import threading import time import os import wave import subprocess import sys import shutil

    import numpy as np import pyaudiowpatch as pyaudio from pystray import Icon, MenuItem, Menu from PIL import Image, ImageDraw

    --- Globals ---

    recording = False mic_chunks = [] sr_mic = None chunk_mic = 8192 # Increased for Bluetooth stability tray_icon = None start_time = None selected_mic = None # Selected microphone device info selected_spk = None # Selected speaker (loopback) device info p = None # PyAudio instance for global access

    --- Get available devices ---

    def get_available_devices(): global p, selected_mic, selected_spk if p is None: p = pyaudio.PyAudio() input_devices = [] output_devices = [] for i in range(p.get_device_count()): dev = p.get_device_info_by_index(i) dev_info = { 'name': dev['name'], 'index': dev['index'], 'input_channels': min(dev['maxInputChannels'], 2) if dev['maxInputChannels'] > 0 else 0, 'output_channels': min(dev['maxOutputChannels'], 2) if dev['maxOutputChannels'] > 0 else 0, 'sample_rate': int(dev['defaultSampleRate']) } if dev['maxInputChannels'] > 0: input_devices.append(dev_info) if 'Razer Seiren Mini' in dev['name'] and not selected_mic: selected_mic = dev_info # Default to Razer Seiren Mini if dev['maxOutputChannels'] > 0: output_devices.append(dev_info) # Validate selected_spk against current devices if selected_spk: if not any(dev['index'] == selected_spk['index'] for dev in output_devices): print(f"⚠️ Previously selected output {selected_spk['name']} no longer available. Resetting to None.") selected_spk = None return input_devices, output_devices

    --- Check if device is selected ---

    def is_input_selected(device): return selected_mic and selected_mic['index'] == device['index']

    def is_output_selected(device): return selected_spk and selected_spk['index'] == device['index'] if device else selected_spk is None

    --- Select device ---

    def select_input_device(device): def inner(icon, item): global selected_mic selected_mic = device print(f"🎙️ Selected input: {selected_mic['name']} (Index: {selected_mic['index']})") icon.title = f"Tray Recorder: {selected_mic['name']}" icon.menu = build_menu() # Rebuild menu with persisted selections return inner

    def select_output_device(device): def inner(icon, item): global selected_spk old_spk = selected_spk['name'] if selected_spk else "None" selected_spk = device new_spk = selected_spk['name'] if selected_spk else "None" print(f"🔈 Output changed from {old_spk} to {new_spk} (Index: {selected_spk['index'] if selected_spk else 'N/A'})") icon.title = f"Tray Recorder: {selected_mic['name'] if selected_mic else 'Idle'}" icon.menu = build_menu() # Rebuild menu with persisted selections return inner

    --- Build dynamic menu ---

    def build_menu(): input_devices, output_devices = get_available_devices() input_menu = Menu( *[MenuItem(f"{dev['name']} ({dev['input_channels']} ch, {dev['sample_rate']} Hz)", select_input_device(dev), checked=lambda item, dev=dev: is_input_selected(dev)) for dev in input_devices] ) output_menu = Menu( MenuItem("None", select_output_device(None), checked=lambda item: is_output_selected(None)), *[MenuItem(f"{dev['name']} ({dev['output_channels']} ch, {dev['sample_rate']} Hz)", select_output_device(dev), checked=lambda item, dev=dev: is_output_selected(dev)) for dev in output_devices] ) return Menu( MenuItem("Select Input Device", input_menu), MenuItem("Select Output Device", output_menu), MenuItem("Start Recording", start_record), MenuItem("Stop Recording", stop_record), MenuItem("Quit", quit_app) )

    --- Test device format ---

    def test_device_format(device, sample_rate, channels, is_input=True): sample_rates = [sample_rate, 48000, 44100, 32000] # Try default, then common rates for sr in sample_rates: for ch in [channels, 1]: # Try specified channels, then 1 try: p.is_format_supported( sr, input_device=device['index'] if is_input else None, output_device=device['index'] if not is_input else None, input_channels=ch if is_input else None, output_channels=ch if not is_input else None, input_format=pyaudio.paInt16 if is_input else None, output_format=pyaudio.paInt16 if not is_input else None ) print(f"✅ Format supported: {device['name']} ({ch} ch, {sr} Hz)") return True, ch, sr except ValueError as e: print(f"⚠️ Format not supported: {device['name']} ({ch} ch, {sr} Hz): {e}") return False, 0, sample_rate

    --- Audio capture worker ---

    def record_worker(): global recording, mic_chunks, sr_mic, chunk_mic, selected_mic, selected_spk, p

    if p is None:
        p = pyaudio.PyAudio()
    
    # Log all devices
    print("🔍 Available devices:")
    for i in range(p.get_device_count()):
        dev = p.get_device_info_by_index(i)
        print(f"Device {i}: {dev['name']}, in_ch={dev['maxInputChannels']}, "
              f"out_ch={dev['maxOutputChannels']}, sr={dev['defaultSampleRate']}")
    
    # Validate selected devices
    if not selected_mic:
        print("❌ No microphone selected")
        recording = False
        p.terminate()
        return
    
    # Microphone setup
    sr_mic = selected_mic['sample_rate']
    mic_idx = selected_mic['index']
    mic_ch = selected_mic['input_channels']
    mic_supported, mic_ch, sr_mic = test_device_format(selected_mic, sr_mic, mic_ch, is_input=True)
    if not mic_supported:
        print(f"❌ Microphone format not supported: {selected_mic['name']} ({mic_ch} ch, {sr_mic} Hz)")
        recording = False
        p.terminate()
        return
    
    print(f"🎙️ Recording from: {selected_mic['name']} "
          f"(Index: {mic_idx}, Channels: {mic_ch}, Sample Rate: {sr_mic} Hz)")
    
    mic_stream = None
    try:
        mic_stream = p.open(
            format=pyaudio.paInt16,
            channels=mic_ch,
            rate=sr_mic,
            input=True,
            input_device_index=mic_idx,
            frames_per_buffer=chunk_mic
        )
    except Exception as e:
        print(f"❌ Cannot open microphone {selected_mic['name']}: {e}")
        recording = False
        p.terminate()
        return
    
    # Speaker loopback setup (if selected)
    spk_stream = None
    spk_chunks = []
    sr_spk = None
    spk_ch = None
    if selected_spk:
        print("⚠️ Note: Bluetooth devices like WH-1000XM4 may not support loopback. Consider using VB-Audio Virtual Cable (https://vb-audio.com/Cable/).")
        sr_spk = selected_spk['sample_rate']
        spk_idx = selected_spk['index']
        spk_ch = selected_spk['output_channels']
        spk_supported, spk_ch, sr_spk = test_device_format(selected_spk, sr_spk, spk_ch, is_input=True)
        if not spk_supported:
            print(f"❌ Speaker format not supported: {selected_spk['name']} ({spk_ch} ch, {sr_spk} Hz)")
            print("🔈 Disabling speaker recording")
            selected_spk = None
        else:
            print(f"🔈 Recording from: {selected_spk['name']} "
                  f"(Index: {spk_idx}, Channels: {spk_ch}, Sample Rate: {sr_spk} Hz)")
            for attempt in range(5):  # Retry up to 5 times
                try:
                    spk_stream = p.open(
                        format=pyaudio.paInt16,
                        channels=spk_ch,
                        rate=sr_spk,
                        input=True,
                        input_device_index=spk_idx,
                        frames_per_buffer=chunk_mic
                    )
                    print(f"✅ Speaker stream opened on attempt {attempt + 1}")
                    break
                except Exception as e:
                    print(f"⚠️ Attempt {attempt + 1} failed to open speaker {selected_spk['name']}: {e}")
                    time.sleep(1.0)  # Longer delay for Bluetooth
                    if attempt == 4:
                        print("❌ Cannot open speaker after 5 attempts. Disabling speaker recording.")
                        selected_spk = None
                        break
    
    mic_chunks.clear()
    spk_chunks.clear()
    
    # Capture loop
    loop_count = 0
    timeout = time.time() + 30
    print("🔄 Starting capture loop...")
    while recording and time.time() < timeout:
        loop_count += 1
        print(f"🔄 Loop iteration {loop_count}, recording={recording}")
        try:
            # Check microphone device
            try:
                dev_info = p.get_device_info_by_index(mic_idx)
                if dev_info['maxInputChannels'] <= 0:
                    print(f"⚠️ Microphone {selected_mic['name']} unavailable")
                    recording = False
                    break
            except Exception as e:
                print(f"⚠️ Error checking microphone: {e}")
                recording = False
                break
    
            # Microphone capture
            if mic_stream and mic_stream.is_active():
                for _ in range(5):
                    try:
                        start_read = time.time()
                        data_mic = mic_stream.read(chunk_mic, exception_on_overflow=False)
                        read_time = time.time() - start_read
                        print(f"🎙️ Read {len(data_mic)} bytes from mic in {read_time:.3f}s")
                        if data_mic:
                            arr_mic = np.frombuffer(data_mic, dtype=np.int16).reshape(-1, mic_ch)
                            mono_mic = arr_mic.mean(axis=1).astype(np.int16).tobytes()
                            mic_chunks.append(mono_mic)
                            mic_max = np.max(np.abs(arr_mic)) if arr_mic.size > 0 else 0
                            print(f"🎙️ Mic chunk {len(mic_chunks)}, max amplitude: {mic_max}")
                            break
                        else:
                            print(f"⚠️ Empty data from {selected_mic['name']}")
                            time.sleep(0.2)
                    except Exception as e:
                        print(f"⚠️ Mic read error: {e}")
                        if "Stream closed" in str(e):
                            break
                        time.sleep(0.2)
                else:
                    print(f"⚠️ Mic read failed after retries")
                    try:
                        mic_stream.close()
                        mic_stream = p.open(
                            format=pyaudio.paInt16,
                            channels=mic_ch,
                            rate=sr_mic,
                            input=True,
                            input_device_index=mic_idx,
                            frames_per_buffer=chunk_mic
                        )
                        print(f"🎙️ Mic stream reinitialized")
                    except Exception as e:
                        print(f"❌ Failed to reinitialize mic stream: {e}")
                        recording = False
                        break
    
            # Speaker capture (if selected)
            if selected_spk and spk_stream and spk_stream.is_active():
                for _ in range(5):
                    try:
                        start_read = time.time()
                        data_spk = spk_stream.read(chunk_mic, exception_on_overflow=False)
                        read_time = time.time() - start_read
                        print(f"🔈 Read {len(data_spk)} bytes from speaker in {read_time:.3f}s")
                        if data_spk:
                            arr_spk = np.frombuffer(data_spk, dtype=np.int16).reshape(-1, spk_ch)
                            mono_spk = arr_spk.mean(axis=1).astype(np.int16).tobytes()
                            spk_chunks.append(mono_spk)
                            spk_max = np.max(np.abs(arr_spk)) if arr_spk.size > 0 else 0
                            print(f"🔈 Speaker chunk {len(spk_chunks)}, max amplitude: {spk_max}")
                            break
                        else:
                            print(f"⚠️ Empty data from {selected_spk['name']}")
                            time.sleep(0.2)
                    except Exception as e:
                        print(f"⚠️ Speaker read error: {e}")
                        if "Stream closed" in str(e):
                            break
                        time.sleep(0.2)
                else:
                    print(f"⚠️ Speaker read failed after retries")
                    try:
                        spk_stream.close()
                        spk_stream = p.open(
                            format=pyaudio.paInt16,
                            channels=spk_ch,
                            rate=sr_spk,
                            input=True,
                            input_device_index=selected_spk['index'],
                            frames_per_buffer=chunk_mic
                        )
                        print(f"🔈 Speaker stream reinitialized")
                    except Exception as e:
                        print(f"❌ Failed to reinitialize speaker stream: {e}")
                        selected_spk = None
                        break
    
        except Exception as e:
            print(f"⚠️ Error in capture loop: {e}")
            recording = False
            break
    
        time.sleep(0.01)
    
    print(f"🛑 Capture loop exited (reason: {'recording=False' if not recording else 'timeout'}, "
          f"mic_chunks: {len(mic_chunks)}, spk_chunks: {len(spk_chunks) if selected_spk else 0}, loops: {loop_count})")
    
    # Cleanup
    if mic_stream:
        try:
            if mic_stream.is_active():
                mic_stream.stop_stream()
            mic_stream.close()
        except Exception as e:
            print(f"⚠️ Error closing mic stream: {e}")
    if spk_stream:
        try:
            if spk_stream.is_active():
                spk_stream.stop_stream()
            spk_stream.close()
        except Exception as e:
            print(f"⚠️ Error closing speaker stream: {e}")
    p.terminate()
    p = None
    

    --- Save & mix via ffmpeg ---

    def save_recording(): global mic_chunks, sr_mic, selected_mic, selected_spk

    print(f"💾 Saving: {len(mic_chunks)} mic chunks from {selected_mic['name']}")
    spk_chunks = []
    if selected_spk:
        print(f"💾 Saving: {len(spk_chunks)} speaker chunks from {selected_spk['name']}")
    
    if not mic_chunks and not spk_chunks:
        print("❌ No audio recorded—skipping save.")
        return
    
    mic_silent = True
    if mic_chunks:
        mic_data = np.frombuffer(b"".join(mic_chunks), dtype=np.int16)
        mic_max = np.max(np.abs(mic_data)) if mic_data.size > 0 else 0
        mic_silent = mic_max < 10
        print(f"🎙️ Mic audio max amplitude: {mic_max}")
    
    spk_silent = True
    if selected_spk and spk_chunks:
        spk_data = np.frombuffer(b"".join(spk_chunks), dtype=np.int16)
        spk_max = np.max(np.abs(spk_data)) if spk_data.size > 0 else 0
        spk_silent = spk_max < 10
        print(f"🔈 Speaker audio max amplitude: {spk_max}")
    
    if mic_silent and spk_silent:
        print("❌ Audio is silent—skipping save.")
        return
    
    ts = int(time.time())
    wav_files = []
    
    # Save microphone audio
    if mic_chunks and not mic_silent:
        wav_mic = f"recording_mic_{time.strftime('%Y%m%d_%H%M%S')}.wav"
        with wave.open(wav_mic, "wb") as wf:
            wf.setnchannels(1)
            wf.setsampwidth(2)
            wf.setframerate(sr_mic)
            wf.writeframes(b"".join(mic_chunks))
        wav_files.append(wav_mic)
    
    # Save speaker audio
    if selected_spk and spk_chunks and not spk_silent:
        wav_spk = f"recording_spk_{time.strftime('%Y%m%d_%H%M%S')}.wav"
        with wave.open(wav_spk, "wb") as wf:
            wf.setnchannels(1)
            wf.setsampwidth(2)
            wf.setframerate(sr_spk if sr_spk else sr_mic)
            wf.writeframes(b"".join(spk_chunks))
        wav_files.append(wav_spk)
    
    if not wav_files:
        print("❌ No valid audio to save.")
        return
    
    # Check for ffmpeg
    ffmpeg_path = shutil.which("ffmpeg")
    if ffmpeg_path is None:
        # Try local ffmpeg.exe in script directory
        script_dir = os.path.dirname(os.path.abspath(__file__))
        local_ffmpeg = os.path.join(script_dir, "ffmpeg.exe")
        if os.path.exists(local_ffmpeg):
            ffmpeg_path = local_ffmpeg
        else:
            print("❌ FFmpeg not found. Please install FFmpeg and add it to your system PATH, or place ffmpeg.exe in the script directory (C:\\Users\\Radek\\Desktop\\audio).")
            print(f"✅ Audio saved as WAV: {wav_files[0]}")
            return
    
    out_mp3 = time.strftime("recording_%Y%m%d_%H%M%S.mp3")
    
    # Mix or save single file
    try:
        if len(wav_files) == 1:
            cmd = [ffmpeg_path, "-y", "-i", wav_files[0], "-codec:a", "libmp3lame", "-qscale:a", "2", out_mp3]
        else:
            cmd = [ffmpeg_path, "-y"]
            for wav in wav_files:
                cmd.extend(["-i", wav])
            cmd.extend(["-filter_complex", "amix=inputs=2:duration=longest", "-codec:a", "libmp3lame", "-qscale:a", "2", out_mp3])
    
        subprocess.run(cmd, check=True)
        print(f"✅ Saved: {out_mp3}")
    
        # Clean up WAV files after successful MP3 conversion
        for wf in wav_files:
            try:
                os.remove(wf)
            except OSError:
                print(f"⚠️ Could not delete temporary WAV file: {wf}")
    except (subprocess.CalledProcessError, FileNotFoundError) as e:
        print(f"❌ FFmpeg failed: {e}")
        print(f"✅ Audio saved as WAV: {wav_files[0]}")
    

    --- Tray & Ctrl+C handling ---

    def make_icon_image(is_rec=False): img = Image.new("RGB", (64, 64), "black") d = ImageDraw.Draw(img) d.ellipse((16, 16, 48, 48), fill="red" if is_rec else "grey") return img

    def start_record(icon, item): global recording, start_time if recording: return if not selected_mic: print("❌ Please select a microphone first") return recording = True start_time = time.time() print("▶ Recording started.") threading.Thread(target=record_worker, daemon=True).start() icon.icon = make_icon_image(True) icon.title = f"Recording: {selected_mic['name']}" icon.menu = build_menu() # Update menu with persisted selections

    def stop_record(icon=None, item=None): global recording, start_time if not recording: return elapsed = time.time() - start_time if start_time else 0 if elapsed < 5: print("⚠️ Stop ignored: recording too short (< 5s)") return print(f"🛑 Stop record called (elapsed: {elapsed:.1f}s)") recording = False if icon: icon.icon = make_icon_image(False) icon.title = "Saving..." time.sleep(1.0) save_recording() if icon: icon.title = f"Tray Recorder: {selected_mic['name'] if selected_mic else 'Idle'}" icon.menu = build_menu() # Update menu with persisted selections

    def quit_app(icon, item): stop_record(icon, item) icon.stop()

    --- Main ---

    if name == "main": # Initialize tray icon tray_icon = Icon( "TrayRecorder", icon=make_icon_image(False), title="Tray Recorder: Idle" )

    # Set initial menu
    tray_icon.menu = build_menu()
    
    tray_icon.run_detached()
    print("Tray recorder running. Use tray menu to select devices and Start/Stop, or Ctrl+C to quit.")
    try:
        while True:
            time.sleep(1)
    except KeyboardInterrupt:
        print("\nInterrupted; stopping...")
        stop_record()
        tray_icon.stop()
        sys.exit(0)
    
  2. Meta Assistant

    The issue lies in the way you're handling the speaker loopback setup. The test_device_format function is checking if the speaker device supports the specified format, but it's doing so as an input device, not an output device.

    To fix this, you should modify the test_device_format function to check the speaker device as an output device. Here's the modified code:

    # --- Test device format ---
    def test_device_format(device, sample_rate, channels, is_input=True):
        sample_rates = [sample_rate, 48000, 44100, 32000]  # Try default, then common rates
        for sr in sample_rates:
            for ch in [channels, 1]:  # Try specified channels, then 1
                try:
                    if is_input:
                        p.is_format_supported(
                            sr,
                            input_device=device['index'],
                            input_channels=ch,
                            input_format=pyaudio.paInt16
                        )
                    else:
                        p.is_format_supported(
                            sr,
                            output_device=device['index'],
                            output_channels=ch,
                            output_format=pyaudio.paInt16
                        )
                    print(f"✅ Format supported: {device['name']} ({ch} ch, {sr} Hz)")
                    return True, ch, sr
                except ValueError as e:
                    print(f"⚠️ Format not supported: {device['name']} ({ch} ch, {sr} Hz): {e}")
        return False, 0, sample_rate
    

    Then, when calling test_device_format for the speaker device, pass is_input=False:

    # Speaker loopback setup (if selected)
    spk_stream = None
    spk_chunks = []
    sr_spk = None
    spk_ch = None
    if selected_spk:
        print("⚠️ Note: Bluetooth devices like WH-1000XM4 may not support loopback.")
        sr_spk = selected_spk['sample_rate']
        spk_idx = selected_spk['index']
        spk_ch = selected_spk['output_channels']
        spk_supported, spk_ch, sr_spk = test_device_format(selected_spk, sr_spk, spk_ch, is_input=False)
        if not spk_supported:
            print(f"❌ Speaker format not supported: {selected_spk['name']} ({spk_ch} ch, {sr_spk} Hz)")
            print("🔈 Disabling speaker recording")
            selected_spk = None
        else:
            print(f"🔈 Recording from: {selected_spk['name']} "
                  f"(Index: {spk_idx}, Channels: {spk_ch}, Sample Rate: {sr_spk} Hz)")
            for attempt in range(5):  # Retry up to 5 times
                try:
                    spk_stream = p.open(
                        format=pyaudio.paInt16,
                        channels=spk_ch,
                        rate=sr_spk,
                        input=True,
                        input_device_index=spk_idx,
                        frames_per_buffer=chunk_mic
                    )
                    print(f"✅ Speaker stream opened on attempt {attempt + 1}")
                    break
                except Exception as e:
                    print(f"⚠️ Attempt {attempt + 1} failed to open speaker {selected_spk['name']}: {e}")
                    time.sleep(1.0)  # Longer delay for Bluetooth
                    if attempt == 4:
                        print("❌ Cannot open speaker after 5 attempts. Disabling speaker recording.")
                        selected_spk = None
                        break
    

    Additionally, when opening the speaker stream, you should use the output_device_index parameter instead of input_device_index:

    spk_stream = p.open(
        format=pyaudio.paInt16,
        channels=spk_ch,
        rate=sr_spk,
        output=True,
        output_device_index=spk_idx,
        frames_per_buffer=chunk_mic
    )
    

    However, PyAudio does not support opening a stream as an output device and then reading from it. This is because the read method is used to read audio data from an input stream, not an output stream.

    To capture the audio output, you would need to use a different approach, such as using the pyaudio.Stream object's write method to write the audio data to a file, or using a library that supports audio loopback, such as pyaudio with the wasapi backend on Windows.

    Here is an example of how you can modify the record_worker function to capture the audio output using the wasapi backend:

    # --- Audio capture worker ---
    def record_worker():
        global recording, mic_chunks, sr_mic, chunk_mic, selected_mic, selected_spk, p
    
        if p is None:
            p = pyaudio.PyAudio()
    
        # Log all devices
        print("🔍 Available devices:")
        for i in range(p.get_device_count()):
            dev = p.get_device_info_by_index(i)
            print(f"Device {i}: {dev['name']}, in_ch={dev['maxInputChannels']}, "
                  f"out_ch={dev['maxOutputChannels']}, sr={dev['defaultSampleRate']}")
    
        # Validate selected devices
        if not selected_mic:
            print("❌ No microphone selected")
            recording = False
            p.terminate()
            return
    
        # Microphone setup
        sr_mic = selected_mic['sample_rate']
        mic_idx = selected_mic['index']
        mic_ch = selected_mic['input_channels']
        mic_supported, mic_ch, sr_mic = test_device_format(selected_mic, sr_mic, mic_ch, is_input=True)
        if not mic_supported:
            print(f"❌ Microphone format not supported: {selected_mic['name']} ({mic_ch} ch, {sr_mic} Hz)")
            recording = False
            p.terminate()
            return
    
        print(f"🎙️ Recording from: {selected_mic['name']} "
              f"(Index: {mic_idx}, Channels: {mic_ch}, Sample Rate: {sr_mic} Hz)")
    
        mic_stream = None
        try:
            mic_stream = p.open(
                format=pyaudio.paInt16,
                channels=mic_ch,
                rate=sr_mic,
                input=True,
                input_device_index=mic_idx,
                frames_per_buffer=chunk_mic
            )
        except Exception as e:
            print(f"❌ Cannot open microphone {selected_mic['name']}: {e}")
            recording = False
            p.terminate()
            return
    
        # Speaker loopback setup (if selected)
        spk_stream = None
        spk_chunks = []
        sr_spk = None
        spk_ch = None
        if selected_spk:
            print("⚠️ Note: Bluetooth devices like WH-1000XM4 may not support loopback.")
            sr_spk = selected_spk['sample_rate']
            spk_idx = selected_spk['index']
            spk_ch = selected_spk['output_channels']
            spk_supported, spk_ch, sr_spk = test_device_format(selected_spk, sr_spk, spk_ch, is_input=False)
            if not spk_supported:
                print(f"❌ Speaker format not supported: {selected_spk['name']} ({spk_ch} ch, {sr_spk} Hz)")
                print("🔈 Disabling speaker recording")
                selected_spk = None
            else:
                print(f"🔈 Recording from: {selected_spk['name']} "
                      f"(Index: {spk_idx}, Channels: {spk_ch}, Sample Rate: {sr_spk} Hz)")
                try:
                    spk_stream = p.open(
                        format=pyaudio.paInt16,
                        channels=spk_ch,
                        rate=sr_spk,
                        input=True,
                        input_device_index=spk_idx,
                        frames_per_buffer=chunk_mic,
                        as_loopback=True
                    )
                except Exception as e:
                    print(f"❌ Cannot open speaker {selected_spk['name']}: {e}")
                    recording = False
                    p.terminate()
                    return
    
        mic_chunks.clear()
        spk_chunks.clear()
    
        # Capture loop
        loop_count = 0
        timeout = time.time() + 30
        print("🔄 Starting capture loop...")
        while recording and time.time() < timeout:
            loop_count += 1
            print(f"🔄 Loop iteration {loop_count}, recording={recording}")
            try:
                # Check microphone device
                try:
                    dev_info = p.get_device_info_by_index(mic_idx)
                    if dev_info['maxInputChannels'] <= 0:
                        print(f"⚠️ Microphone {selected_mic['name']} unavailable")
                        recording = False
                        break
                except Exception as e:
                    print(f"⚠️ Error checking microphone: {e}")
                    recording = False
                    break
    
                # Microphone capture
                if mic_stream and mic_stream.is_active():
                    for _ in range(5):
                        try:
                            start_read = time.time()
                            data_mic = mic_stream.read(chunk_mic, exception_on_overflow=False)
                            read_time = time.time() - start_read
                            print(f"🎙️ Read {len(data_mic)} bytes from mic in {read_time:.3f}s")
                            if data_mic:
                                arr_mic = np.frombuffer(data_mic, dtype=np.int16).reshape(-1, mic_ch)
                                mono_mic = arr_mic
    

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.