Skip to content
TheChatArchiveThe Chat Archive
Qwenqwen3-235b-a22b-no-thinking· Alibaba (Qwen)Hugging Face LMArena Human Preference 140K

how to calculate chlorophyll content of 100 mg plant sample that is homogenized in 2ml…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash’s answer.
  1. User

    how to calculate chlorophyll content of 100 mg plant sample that is homogenized in 2ml acetone

  2. Qwen Assistant

    To calculate the chlorophyll content of a 100 mg plant sample homogenized in 2 mL acetone, you can use the spectrophotometric method. This involves measuring the absorbance of chlorophyll in the extract at specific wavelengths and applying standard equations to determine the concentration.


    🔬 Materials Required:

    • Acetone (80% or 95% commonly used)
    • Spectrophotometer
    • Centrifuge (if needed to clarify the extract)
    • Balance (to weigh plant tissue)
    • Volumetric glassware

    🧪 Step-by-Step Procedure:

    1. Sample Preparation:

    • Weigh 100 mg (0.1 g) of fresh or frozen plant tissue.
    • Homogenize in 2 mL of 80% or 95% acetone.
    • Centrifuge or filter the homogenate to remove debris if cloudy.
    • Make up the final volume to 2 mL (if any loss occurs during homogenization).

    2. Measure Absorbance:

    Using a spectrophotometer, measure the absorbance of the supernatant at:

    • 663 nm – absorption peak for chlorophyll a
    • 645 nm – absorption peak for chlorophyll b
    • 652 nm – sometimes used for total chlorophyll (especially in some protocols)

    Use acetone as blank.


    📐 Calculations:

    There are several equations in use depending on the solvent and wavelengths chosen.

    ✅ Using Lichtenthaler & Wellburn (1983) protocol with 80% acetone and absorbance at 663 and 645 nm:

    📘 Chlorophyll a (Chl a):

    Chl a=(12.7×A663)−(2.69×A645)\text{Chl a} = (12.7 \times A_{663}) - (2.69 \times A_{645})

    📘 Chlorophyll b (Chl b):

    Chl b=(22.9×A645)−(4.68×A663)\text{Chl b} = (22.9 \times A_{645}) - (4.68 \times A_{663})

    📘 Total Chlorophyll:

    Total Chl=Chl a+Chl b\text{Total Chl} = \text{Chl a} + \text{Chl b}

    Units from this formula give mg of chlorophyll per liter of extract (mg/L)


    🔁 Convert to mg/g fresh weight (FW):

    Since your original sample was 100 mg (0.1 g) in 2 mL acetone, and assuming all chlorophyll is extracted into the 2 mL:

    Chlorophyll (mg/g FW)=Concentration from formula (mg/L)×Extract volume (L)Fresh weight (g)\text{Chlorophyll (mg/g FW)} = \frac{\text{Concentration from formula (mg/L)} \times \text{Extract volume (L)}}{\text{Fresh weight (g)}}

    In your case:

    • Extract volume = 2 mL = 0.002 L
    • Fresh weight = 0.1 g

    So:

    Chl a (mg/g FW)=(Chla in mg/L)×0.0020.1\text{Chl a (mg/g FW)} = \frac{(Chl a \text{ in mg/L}) \times 0.002}{0.1} Chl b (mg/g FW)=(Chlb in mg/L)×0.0020.1\text{Chl b (mg/g FW)} = \frac{(Chl b \text{ in mg/L}) \times 0.002}{0.1}

    Or simplified:

    Chl a/b (mg/g FW)=(mg/L)×0.02\text{Chl a/b (mg/g FW)} = (\text{mg/L}) \times 0.02

    📌 Example:

    Suppose your absorbance values are:

    • A₆₆₃ = 0.8
    • A₆₄₅ = 0.4

    Then:

    • Chl a = (12.7 × 0.8) − (2.69 × 0.4) = 10.16 − 1.076 = 9.084 mg/L
    • Chl b = (22.9 × 0.4) − (4.68 × 0.8) = 9.16 − 3.744 = 5.416 mg/L

    Convert to mg/g FW:

    • Chl a = 9.084 × 0.02 = 0.182 mg/g FW
    • Chl b = 5.416 × 0.02 = 0.108 mg/g FW
    • Total Chl = 0.182 + 0.108 = 0.290 mg/g FW

    ✅ Final Answer Format:

    The chlorophyll content of the 100 mg plant sample extracted in 2 mL acetone was found to be:

    • Chlorophyll a: X mg/g fresh weight
    • Chlorophyll b: Y mg/g fresh weight
    • Total chlorophyll: Z mg/g fresh weight

    (Replace X, Y, Z with your calculated values.)


    Let me know if you need help adapting this for different solvents, like ethanol, or if you're using different wavelengths!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.