say I want to pay a manufacturer to create an acrylic shell that is basically a box for…
- User
say I want to pay a manufacturer to create an acrylic shell that is basically a box for holding/protecting PSA slabs. how thin can the acrylic feasibly be? Say that I want to add a female t rail slot at the top of this shell, on the "thin" side as well. (so the box needs to be thick enough to realistically have a t rail shape cut into it but thin enough to not be too bulky.
Assistant
For an acrylic shell protecting PSA slabs, you'll want to balance durability with minimal bulk. Here's what's feasible:
Minimum wall thickness: 2-3mm (0.08-0.12") is typically the thinnest practical thickness for a protective box. This provides adequate impact resistance while keeping the profile slim. Going thinner risks cracking from normal handling.
For the T-rail slot: You'll need at least 4-5mm (0.16-0.20") thickness on the side where you're cutting the female T-rail. A standard T-rail profile requires about 3-4mm depth for the slot itself, plus you need at least 1mm of material remaining for structural integrity.
Practical approach: Consider making the main body walls 2.5-3mm thick, but increase the thickness to 5mm only on the edge where the T-rail slot will be machined. This gives you a clean T-rail cut while keeping the overall profile minimal.
The manufacturer can easily achieve this with CNC machining or laser cutting, and the slight thickness variation won't be visually obvious. Most acrylic fabricators work comfortably in these dimensions - it's thick enough to machine cleanly but thin enough to avoid the "chunky" look you're trying to avoid.
What size PSA slabs are you looking to protect? That might influence the optimal thickness choice.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.