gpt-4.1-2025-04-14· OpenAI
LMArena Human Preference 140K
no floor clamps?
- User
no floor clamps?
- Assistant
Great question! Floor clamps (also called bottom brackets or floor U-clamps) are sometimes used for extra stability, especially for tall or wide fixed glass panels. Whether you need them depends on a few factors:
For Your Setup (50 cm wide, 2 m high fixed panels, 10 mm glass):
- If the fixed glass panels are only clamped to the wall at the sides (no U-channel or silicone at the bottom), then adding a floor clamp at the bottom of each fixed panel is highly recommended for stability and to prevent movement.
- If you are using a continuous U-channel at the bottom (with silicone), sometimes floor clamps are not strictly necessary, but they do add extra security.
- If you want maximum rigidity (especially with 2 m high glass), floor clamps are a good idea.
Typical Recommendation:
- 1 floor clamp per fixed panel (so, 2 total: one for each 50 cm panel at the bottom).
- These are usually placed about 5–10 cm from the edge (not right at the corner).
Revised Parts List:
Component Qty Remarks Glass-to-glass hinges 2 Top & bottom, door ↔ panel Glass-to-wall clamps 4 2 per fixed panel, at sides Glass-to-floor clamps 2 1 per fixed panel, at bottom (Optional) Stabilizing bar 1 For extra stiffness Total:
- 2 hinges
- 4 wall clamps
- 2 floor clamps
- (Optional) 1 stabilizing bar
Summary:
Yes, you should order 2 floor clamps (one for each fixed panel) for best practice and stability.If you have more details about your installation method (U-channel, silicone, etc.), let me know and I can tailor the advice further!
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.