A constant-value resistor is connected in series with a sliding varistor (whose…
- User
A constant-value resistor is connected in series with a sliding varistor (whose resistance is proportional to its length). Its electric power is 0.8 W when the resistance of the sliding varistor is half its maximum resistance, and 0.9 W when the resistance of the sliding varistor is at its maximum resistance.What is the electric power of the constant-value resistor in the first case?
(Circuit environment is ideal) (Translated, some description may be inaccurate) (The answer cannot be given directly, and there must be a process of calculation)
- Assistant
Step 1 – decide what stays constant
If the supply were a constant-voltage source, raising the total resistance (from R+Rm/2 to R+Rm) would make the total power fall, not rise from 0.8 W to 0.9 W.
Therefore the circuit must be fed by a constant-current source I, so thatP = I² · RtotalStep 2 – write the two power equations
Call the fixed resistance R and let Rm be the maximum value of the sliding resistor.Case 1 (slider at ½ Rm) Rtotal,1 = R + Rm/2
I² ( R + Rm/2 ) = 0.8 (1)Case 2 (slider at Rm) Rtotal,2 = R + Rm
I² ( R + Rm ) = 0.9 (2)Step 3 – eliminate I² and Rm
Subtract (1) from (2):I² ( R + Rm ) – I² ( R + Rm/2 ) = 0.9 – 0.8 I² ( Rm/2 ) = 0.1 → I² Rm = 0.2 (3)Insert (3) into (2):
I² ( R + Rm ) = 0.9 I² R + I² Rm = 0.9 I² R + 0.2 = 0.9 (from 3) I² R = 0.7 (4)Step 4 – power in the fixed resistor in case 1
Power in R is always PR = I²R, and from (4)PR = 0.7 WAnswer: the constant-value resistor dissipates 0.7 watts when the sliding resistor is set to half of its maximum value.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.