Skip to content
TheChatArchiveThe Chat Archive
o4-mini-2025-04-16· OpenAIHugging Face LMArena Human Preference 140K

Is the following statement true? "A common estimate for Transformer-based models is that…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with grok-3-mini-beta’s answer.
  1. User

    Is the following statement true? "A common estimate for Transformer-based models is that activations require about 2-4 times the memory of the model weights. Let's assume an average of 3 × model weights for activations (a rough estimate, as it varies with model depth and architecture)"

  2. Assistant

    That 2–4× rule of thumb is not a hard “law”, but it’s a reasonable rough estimate for full-precision (FP32/FP16) Transformer training when you pick typical batch sizes and sequence lengths. Here’s why:

    1. Memory breakdown in a vanilla Transformer training run

      • Weights (model parameters): #Params × 4 bytes (FP32) or 2 bytes (FP16)
      • Gradients + optimizer states (e.g. Adam): roughly 2 × weights
      • Activations (hidden‐states, attention maps, etc.): ∼ batch_size × seq_len × hidden_size × depth × 4 bytes
      • Others (buffers, workspace): usually small in comparison
    2. Why activations often ≈ 3× weights

      • For a big model (say 1 B parameters in FP16 ≈ 2 GB of weights) and a realistic training mini‐batch (e.g. batch=8, seq_len=1024), the layer‐by‐layer activations (and intermediate attention caches) can sum up to ~~6 GB.
      • That gives a ratio:
        activations / weights ≈ 6 GB / 2 GB = 3.
    3. What makes it vary?

      • Batch size & sequence length: larger → more activations
      • Depth & hidden size: more layers or wider layers → more activations
      • Precision: FP16 halves activation storage vs. FP32
      • Checkpointing / recomputation: trades compute for memory and can cut peak activations by ~2× at the cost of extra passes

    —
    Example memory breakdown for a hypothetical 1 B-param model (FP16):

    ComponentSize (GB)Relative to weights
    Weights2.01×
    Gradients + optimizer4.02×
    Activations (peak)~6.0~3×
    Other buffers~0.50.25×
    Total12.5—

    Bottom line:
    • If you’re sizing GPU/TPU memory for training, budgeting 2×–4× the model’s weight footprint for activations is a useful rule of thumb.
    • But your actual ratio can easily fall outside that window if you tweak batch size, seq length, precision mode, or introduce memory‐saving tricks.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.