Skip to content
TheChatArchiveThe Chat Archive
gpt-4.1-mini-2025-04-14· OpenAIHugging Face LMArena Human Preference 140K

I am having trouble using ssh from my windows computer into my ubuntu machine. Ubuntu…

  1. User

    I am having trouble using ssh from my windows computer into my ubuntu machine. Ubuntu has ssh running and allowed through the ufw firewall. Both computers are on my home network, but the windows computer is wired and the other is on wifi, could that be the problem?

  2. Assistant

    The fact that your Windows computer is wired and your Ubuntu machine is on Wi-Fi should not inherently be a problem for SSH connectivity, as long as both devices are on the same local network and can communicate with each other.

    Here are some steps and checks to help you troubleshoot the SSH connection issue:

    1. Verify Both Devices Are on the Same Network

    • Check the IP address of your Ubuntu machine:
      ip a
      
      or
      ifconfig
      
    • Check the IP address of your Windows machine:
      • Open Command Prompt and run:
        ipconfig
        
    • Make sure both IP addresses are in the same subnet (e.g., both start with 192.168.1.x or 10.0.0.x).

    2. Test Network Connectivity

    • From your Windows machine, try to ping the Ubuntu machine’s IP address:
      ping <ubuntu-ip-address>
      
    • If ping fails, there might be a network isolation issue (some routers isolate wired and wireless clients).

    3. Check SSH Service on Ubuntu

    • Confirm SSH is running:
      sudo systemctl status ssh
      
    • If it’s not running, start it:
      sudo systemctl start ssh
      

    4. Confirm UFW Rules

    • Check UFW status and rules:
      sudo ufw status
      
    • Make sure SSH (port 22) is allowed:
      To                         Action      From
      --                         ------      ----
      22/tcp                     ALLOW       Anywhere
      

    5. Try Connecting with SSH from Windows

    • Use PowerShell or Command Prompt:
      ssh username@<ubuntu-ip-address>
      
    • If you get a timeout or connection refused, note the error message.

    6. Router Settings

    • Some routers have "AP isolation" or "Client isolation" enabled, which prevents devices on Wi-Fi from communicating with wired devices.
    • Log into your router’s admin interface and check if such a setting is enabled. Disable it if necessary.

    7. Firewall on Windows

    • Make sure Windows Firewall or any security software is not blocking outbound SSH connections.

    Summary:

    • Wired vs Wi-Fi is usually not a problem.
    • Ensure both devices are on the same subnet.
    • Check SSH service and firewall on Ubuntu.
    • Test network connectivity (ping).
    • Check router settings for client isolation.

    If you want, you can share the exact error message you get when trying to SSH, and I can help diagnose further!

  3. User

    "hostname -I" returns an ip address that looks like 10.0.0.x, could this be right?

  4. Assistant

    Yes, an IP address in the 10.0.0.x range is perfectly normal for a private home network. The 10.x.x.x range is one of the private IP address ranges defined by RFC 1918, commonly used in local networks.

    What this means:

    • Your Ubuntu machine’s IP address being 10.0.0.x means it’s on a private network.
    • Your Windows machine should also have an IP address in the same subnet, something like 10.0.0.y (where y is a different number).
    • If both devices have IPs in the 10.0.0.x range and the subnet mask is the same (usually 255.255.255.0), they are on the same local network and should be able to communicate.

    Next steps:

    1. On your Windows machine, open Command Prompt and run:

      ipconfig
      

      Look for the IPv4 address and check if it’s also in the 10.0.0.x range.

    2. If both are in the same range, try pinging the Ubuntu machine from Windows:

      ping 10.0.0.x
      

      (replace 10.0.0.x with your Ubuntu IP)

    3. If ping works, try SSH again:

      ssh username@10.0.0.x
      

    If ping doesn’t work or SSH still fails, the problem might be firewall, SSH service, or router settings (like client isolation).

    Let me know what you find!

  5. User

    My windows ip is 192.168.x.x

  6. Assistant

    Ah, that explains the problem!

    Your Windows machine is on the 192.168.x.x subnet, while your Ubuntu machine is on the 10.0.0.x subnet. These are two different private IP address ranges, which means your devices are on different networks and likely cannot communicate directly.


    Why this happens:

    • Your router (or possibly two different routers/access points) is assigning IP addresses from two different subnets.
    • Devices on different subnets usually cannot see each other unless routing is explicitly set up between them.

    How to fix this:

    Option 1: Put both devices on the same subnet

    • Connect both devices to the same network segment so they get IPs in the same range.
    • For example, connect your Windows PC to the Wi-Fi network (instead of wired) or connect your Ubuntu machine to the wired network.
    • Or configure your router so that both wired and wireless clients get IPs from the same subnet (usually the default behavior).

    Option 2: Check your network setup

    • You might have two routers or a router + access point that are creating two separate networks:
      • One network: 192.168.x.x (Windows wired)
      • Another network: 10.0.0.x (Ubuntu Wi-Fi)
    • If so, you can:
      • Disable one router’s DHCP and use it as a simple access point.
      • Or configure routing between the two subnets (more advanced).

    Quick test:

    • Try connecting your Windows PC to the same Wi-Fi network as your Ubuntu machine and see if it gets a 10.0.0.x IP.
    • Then try SSH again using the 10.0.0.x IP.

    If you want, I can help you figure out your router setup or how to unify your network! Just let me know.