Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash-preview-04-17· GoogleHugging Face LMArena Human Preference 140K

Untitled conversation

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-preview-04-17’s answer.
  1. User
    #!/usr/bin/env bash
    set -euo pipefail
    
    PRETOKENIZERS=(bytes_gpt4_cb bytes_gpt4o_cb scriptenc_cb scriptenc_gpt4o_cb)
    corpora=(CulturaX-subsample-100-bal2)
    N=256000
    N_CPUS=64
    
    for corpus in "${corpora[@]}"; do
      for pretokenizer in "${PRETOKENIZERS[@]}"; do
        uv run script_bpe/train.py --report \
          -n             "$N" \
          --corpus       "$corpus" \
          --pretokenizer "$pretokenizer" \
          --parallel     "$N_CPUS" | tee log_multilingual.txt
      done
    done
    
    echo "Done training on: ${corpora[*]} with pretokenizers: ${PRETOKENIZERS[*]}"
    

    adapt script to time on 128,64,32,16,8 cpus

  2. Gemini Assistant

    Okay, here's the adapted bash script that will run your training command for each specified number of CPUs and use the time command to measure how long each run takes.

    The output will be appended to a log file (log_timing.txt by default), with clear separators and timestamps indicating the start and end of each specific training run (for a given CPU count, corpus, and pretokenizer). The output from the time command will also be captured in the log file for each run.

    #!/usr/bin/env bash
    set -euo pipefail
    
    # --- Configuration ---
    PRETOKENIZERS=(bytes_gpt4_cb bytes_gpt4o_cb scriptenc_cb scriptenc_gpt4o_cb)
    corpora=(CulturaX-subsample-100-bal2)
    N=256000
    CPU_COUNTS=(128 64 32 16 8) # CPU counts to test
    LOG_FILE="log_timing.txt"   # File to append all output to
    
    # --- Script ---
    
    echo "--- Starting timing runs ---" | tee -a "$LOG_FILE"
    echo "Corpora: ${corpora[*]}" | tee -a "$LOG_FILE"
    echo "Pretokenizers: ${PRETOKENIZERS[*]}" | tee -a "$LOG_FILE"
    echo "Sample Size (-n): $N" | tee -a "$LOG_FILE"
    echo "CPU counts to test: ${CPU_COUNTS[*]}" | tee -a "$LOG_FILE"
    echo "Log file: $LOG_FILE" | tee -a "$LOG_FILE"
    echo "------------------------------" | tee -a "$LOG_FILE"
    echo "" | tee -a "$LOG_FILE"
    
    # Loop through each CPU count
    for cpu_count in "${CPU_COUNTS[@]}"; do
      echo "--- Testing with N_CPUS = ${cpu_count} ---" | tee -a "$LOG_FILE"
    
      # Loop through each corpus
      for corpus in "${corpora[@]}"; do
    
        # Loop through each pretokenizer
        for pretokenizer in "${PRETOKENIZERS[@]}"; do
    
          # --- Run Configuration Header ---
          echo "" | tee -a "$LOG_FILE"
          echo "--- Running corpus='${corpus}', pretokenizer='${pretokenizer}', parallel='${cpu_count}' ---" | tee -a "$LOG_FILE"
          echo "Start time: $(date +%Y-%m-%d_%H:%M:%S)" | tee -a "$LOG_FILE"
          echo "" | tee -a "$LOG_FILE"
          # ----------------------------------
    
          # Construct the command
          COMMAND_TO_RUN="uv run script_bpe/train.py --report -n $N --corpus $corpus --pretokenizer $pretokenizer --parallel $cpu_count"
    
          # Execute the command and time it.
          # `time` output goes to stderr, which is then redirected to stdout (2>&1)
          # and piped to tee, which sends it to both stdout and the log file.
          # The output of the command itself also goes through the pipe.
          { time $COMMAND_TO_RUN; } 2>&1 | tee -a "$LOG_FILE"
    
          # --- Run Configuration Footer ---
          echo "" | tee -a "$LOG_FILE"
          echo "End time: $(date +%Y-%m-%d_%H:%M:%S)" | tee -a "$LOG_FILE"
          echo "--- Finished corpus='${corpus}', pretokenizer='${pretokenizer}', parallel='${cpu_count}' ---" | tee -a "$LOG_FILE"
          echo "" | tee -a "$LOG_FILE"
          # ----------------------------------
    
        done # End pretokenizer loop
      done # End corpus loop
      echo "--- Finished testing with N_CPUS = ${cpu_count} ---" | tee -a "$LOG_FILE"
      echo "" | tee -a "$LOG_FILE"
    done # End cpu_count loop
    
    echo "--- All timing runs completed ---" | tee -a "$LOG_FILE"
    

    Explanation:

    1. CPU_COUNTS=(128 64 32 16 8): This new array holds the different values you want to use for the --parallel argument.
    2. LOG_FILE="log_timing.txt": Defines the name of the file where all output will be collected. tee -a ensures output is appended, not overwritten.
    3. Outer Loop: A new for cpu_count in "${CPU_COUNTS[@]}"; do ... done loop is added around your existing loops. This means the entire set of corpus/pretokenizer combinations will be run for each CPU count.
    4. time { COMMAND; } 2>&1 | tee -a "$LOG_FILE":
      • time: This built-in bash command (or sometimes an external utility /usr/bin/time) measures the execution time of the following command.
      • { COMMAND; }: Groups the command uv run .... This is sometimes useful with time.
      • 2>&1: Redirects the standard error of the time command (where it prints its timing information) and the uv run command to standard output.
      • | tee -a "$LOG_FILE": Pipes all standard output (which now includes stderr) to the tee command. tee -a writes it to both standard output (so you see it in the terminal as it runs) and appends it to the specified log file (log_timing.txt).
    5. Header/Footer Lines: echo "--- Running ... ---" and echo "Start/End time: ..." lines are added before and after each individual run within the loops. This makes it much easier to locate and analyze the results for a specific configuration within the combined log file. The | tee -a "$LOG_FILE" ensures these markers also appear in the log file.
    6. Variable Usage: The --parallel argument now uses the loop variable "$cpu_count".

    After running this script, you can examine log_timing.txt. For each run, you'll see:

    • The header line indicating the parameters (corpus, pretokenizer, parallel count).
    • The start timestamp.
    • The standard output/error of the uv run command.
    • The output from the time command (usually showing real, user, and sys time).
    • The end timestamp.
    • The footer line.

    The real time is typically the wall-clock time, which is what you're likely most interested in for performance comparisons.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.