Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

What do you call it on cnc machines when you zero in the angles so that, eg,…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwen3-30b-a3b’s answer.
  1. User

    What do you call it on cnc machines when you zero in the angles so that, eg, surfacing/planing doesn't leave ridges?

  2. Claude Assistant

    That's called "tramming" or "squaring" the machine. When you tram a CNC machine, you're adjusting the spindle to be perfectly perpendicular to the table or work surface. This ensures that when you do operations like face milling or surfacing, the cutting tool moves in a plane that's exactly parallel to the table, preventing those telltale ridges or steps that appear when the spindle is tilted even slightly.

    The process typically involves using a dial indicator mounted in the spindle to check runout at various points on the table, then making fine adjustments to the head or column until the readings are consistent all around. Some people also refer to this as "indicating in" the head or checking the "nod" and "tilt" of the spindle.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.