A small spherical ball falling through a viscous medium of negligible density has…
- User
A small spherical ball falling through a viscous medium of negligible density has terminal velocity v. Another ball of the same mass but of radius twice that of the earlier falling through the same viscous medium will have terminal velocity
Assistant
To determine the terminal velocity of the second ball, we start by noting that terminal velocity occurs when the viscous drag force equals the gravitational force. Using Stokes' Law for the drag force ( F_{\text{drag}} = 6\pi\eta r v ) and equating it to the weight ( mg ), we have:
For the first ball: [ 6\pi\eta r_1 v = mg ]
For the second ball (with radius ( r_2 = 2r_1 )): [ 6\pi\eta r_2 v_2 = mg ]
Since the mass ( m ) and gravitational acceleration ( g ) are the same for both balls, we equate the two equations: [ 6\pi\eta r_1 v = 6\pi\eta r_2 v_2 ]
Canceling the common factors ( 6\pi\eta ) from both sides: [ r_1 v = r_2 v_2 ]
Substituting ( r_2 = 2r_1 ): [ r_1 v = 2r_1 v_2 ]
Solving for ( v_2 ): [ v_2 = \frac{r_1}{2r_1} v = \frac{v}{2} ]
Thus, the terminal velocity of the second ball is \boxed{\dfrac{v}{2}}.
- User
give as ratio?
Assistant
The terminal velocity of the second ball compared to the first is given by the ratio:
[ \frac{v_2}{v} = \frac{1}{2} ]
Thus, the ratio of their terminal velocities is \boxed{\dfrac{1}{2}}.
- User
bro we have direct that v proportional to r^2. if we have double r, then 1:4 gith
Assistant
The confusion arises from the relationship between terminal velocity and radius when mass is held constant. Let's clarify this step-by-step:
Key Concepts:
-
Terminal Velocity (Stokes' Law):
Terminal velocity ( v ) is given by
[ v = \frac{2}{9} \frac{\rho g r^2}{\eta} ]
where ( \rho ) is the density of the sphere, ( r ) is its radius, ( g ) is gravity, and ( \eta ) is the fluid viscosity. -
Mass Constraint:
Both spheres have the same mass ( m ). Since mass ( m = \rho \cdot \frac{4}{3}\pi r^3 ), if the radius doubles (( r_2 = 2r_1 )), the density must decrease to keep the mass constant:
[ \rho_2 = \frac{\rho_1}{8} ]
(because volume increases by ( 2^3 = 8 ), so density must decrease by ( 1/8 ) to maintain ( m = \text{constant} )).
Calculation:
For Sphere 1:
[ v_1 = \frac{2}{9} \frac{\rho_1 g r_1^2}{\eta} ]For Sphere 2 (radius ( 2r_1 ), density ( \rho_2 = \rho_1/8 )):
[ v_2 = \frac{2}{9} \frac{\left(\frac{\rho_1}{8}\right) g (2r_1)^2}{\eta} ]Simplify ( v_2 ):
[ v_2 = \frac{2}{9} \frac{\rho_1 g}{\eta} \cdot \frac{(4r_1^2)}{8} = \frac{2}{9} \frac{\rho_1 g r_1^2}{\eta} \cdot \frac{1}{2} = \frac{v_1}{2} ]
Key Insight:
- Terminal velocity ( v \propto r^2 \times \rho ), but ( \rho \propto 1/r^3 ) (due to constant mass).
- Combining these gives ( v \propto \frac{r^2}{r^3} = \frac{1}{r} ).
Thus, doubling the radius halves the terminal velocity (( v_2 = \frac{v_1}{2} )), not quarters it.
Final Answer:
The ratio of terminal velocities ( \frac{v_2}{v_1} = \boxed{\dfrac{1}{2}} ).
Why Your Initial Thought Was Off:
You likely assumed density remains constant (which would give ( v \propto r^2 )), but the problem specifies same mass, forcing density to decrease with ( r^3 ). This adjustment changes the proportionality to ( v \propto \frac{1}{r} ). Always check if density or volume is constrained!
-
- User
alr alr
Assistant
The confusion arises from whether density or mass is held constant. Here's the step-by-step clarification:
Key Relationship
Terminal velocity ( v ) is determined by balancing weight and viscous drag (Stokes' Law):
[ 6\pi\eta r v = mg \quad \Rightarrow \quad v = \frac{mg}{6\pi\eta r} ]Given Conditions
- Both balls have the same mass (( m )).
- Second ball has double the radius (( r_2 = 2r_1 )).
- Viscous medium (( \eta )) is the same for both.
Critical Insight
Since mass is constant, the density of the second ball must decrease to compensate for its larger volume. However, this doesn’t affect the proportionality because the mass (( m )) cancels out in the terminal velocity formula.
Calculation
For the first ball:
[ v_1 = \frac{mg}{6\pi\eta r_1} ]For the second ball (radius ( 2r_1 )):
[ v_2 = \frac{mg}{6\pi\eta (2r_1)} = \frac{v_1}{2} ]
Why Not ( v \propto r^2 )?
If density were constant (instead of mass), terminal velocity would indeed be proportional to ( r^2 ). However, mass is constant, so:
- Volume ( \propto r^3 \Rightarrow ) density ( \propto 1/r^3 ).
- Combining with ( v \propto r^2 \times \text{(density)} ), we get:
[ v \propto \frac{r^2}{r^3} = \frac{1}{r} ]
Thus, doubling ( r ) halves ( v ).
Final Answer
The ratio of terminal velocities is:
[ \frac{v_2}{v_1} = \boxed{\dfrac{1}{2}} ]
Summary
- Same mass forces density to decrease with radius.
- Terminal velocity depends on ( 1/r ) when mass is constant.
- Key formula: ( v \propto \frac{1}{r} ).
This resolves the confusion between ( v \propto r^2 ) (if density were constant) and ( v \propto 1/r ) (when mass is fixed).
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.