Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash-preview-04-17· GoogleHugging Face LMArena Human Preference 140K

what's a good Vim setup for python. Should I use neovim and tmux. Should I use plain…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Googlegemma-3n-e4b-it’s answer.
  1. User

    what's a good Vim setup for python. Should I use neovim and tmux. Should I use plain vim. How can I have a strong Vim setup for a complete beginner to Vim coming from PyCharm. I at least want good syntax highlighting. i'm also on a Mac. Should I use iTerm or the Terminal app. Just give me a run down. I want debugging is possible, but if it's too complex, leave it out. Be super opinionated, and suggest 1 thing. Don't use things like Neovim if it will only make things complicated and confuse me.

  2. Gemini Assistant

    Okay, ditch everything you know about PyCharm's all-in-one experience for a moment. Vim is a different beast – it's a highly configurable text editor that you build up with plugins and configure with a text file (.vimrc). You're not getting a ready-made IDE; you're getting incredibly powerful core editing, and then you bolt on the features you need.

    Given you're a complete beginner to Vim coming from PyCharm, are on a Mac, want good syntax highlighting, and want to avoid complexity, here is my super opinionated, single-recommendation setup:

    Use Standard Vim, iTerm2, vim-plug, and just Two Essential Plugins.

    Forget Neovim, forget tmux for now, forget built-in debugging until you're comfortable with Vim basics. This setup provides a strong foundation with crucial Python features without overwhelming you.

    Here's the breakdown and how to set it up:

    1. The Editor: Standard Vim (via Homebrew)

      • Why not Neovim? Neovim is the future of Vim and better in many ways (asynchronous operations, Lua scripting), which is great for advanced setups (especially LSP for completion/linting). But its configuration (init.vim instead of .vimrc) and some plugin ecosystems are slightly different. For a complete beginner, sticking with standard Vim's vast, well-documented .vimrc world is simpler. The Vim you get via Homebrew is modern enough for excellent Python development with the right plugins.
      • Action: Install or update Vim via Homebrew.
        • Install Homebrew if you don't have it: /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
        • Install Vim: brew install vim
    2. The Terminal: iTerm2

      • Why not the default Terminal app? iTerm2 is simply better. It offers more customization, better color support (essential for syntax highlighting themes), split panes (useful later, even if you skip tmux), and other developer-friendly features. It's a straightforward app install, not extra complexity you have to configure heavily upfront.
      • Action: Download and install iTerm2 from https://iterm2.com/. Use this as your terminal application from now on.
    3. The Plugin Manager: vim-plug

      • Why not manual installation or other managers? You need plugins for a "strong" Python setup beyond basic syntax. Manually managing plugins is a nightmare. vim-plug is widely used, fast, and easy to configure in your .vimrc. It makes adding, updating, and removing plugins trivial.
      • Action: Follow the simple installation instructions for vim-plug. For Vim, it's usually creating a directory and downloading a file:
        curl -fLo ~/.vim/autoload/plug.vim --create-dirs \
            https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
        
    4. The Crucial Plugins (Just Two to Start):

      • You need more than just Vim's built-in capabilities for a "strong" Python setup like you're used to. These two plugins provide essential Python features that bridge the gap slightly.
      • Plugin 1: dense-analysis/ale (Asynchronous Lint Engine)
        • What it does: Provides "linting" (checking your code for errors, style issues) and "fixing" (auto-formatting) as you type or save, without slowing Vim down. This is huge for catching mistakes early, similar to PyCharm's real-time checks.
        • Requires External Tools: ale itself doesn't do the checking; it runs external tools. For Python, you'll need linters like flake8 and formatters like autopep8 or black. Install these via pip in your Python environment (global or virtualenv): pip install flake8 autopep8
      • Plugin 2: preservim/nerdtree
        • What it does: Provides a file system explorer pane inside Vim. This lets you browse your project directory structure and open files easily, similar to the project view in PyCharm.
      • Action: Add these to your .vimrc file.
    5. Your .vimrc File (The Brains):

      • This file lives in your home directory (~/.vimrc). This is where you configure everything about Vim.
      • Action: Create or edit ~/.vimrc and add the following lines. Read the comments to understand what each part does.
      " --- Plugin Setup (with vim-plug) ---
      " Specify a directory for plugins
      call plug#begin('~/.vim/plugged')
      
      " List your plugins here:
      Plug 'dense-analysis/ale'      " Asynchronous Lint Engine for checks/fixes
      Plug 'preservim/nerdtree'       " File system explorer
      
      " All of your Plug calls go above this line
      call plug#end()
      
      " --- Basic Vim Settings (Quality of Life) ---
      syntax enable              " Turn on syntax highlighting
      filetype plugin indent on  " Enable file type detection, plugins, and indentation
      
      " Basic Indentation for Python (use 4 spaces, not tabs)
      set expandtab
      set tabstop=4
      set shiftwidth=4
      
      " Display line numbers
      set number
      " Display relative line numbers (useful for motion commands)
      set relativenumber
      
      " Enable mouse support (useful for clicking and scrolling in iTerm2)
      set mouse=a
      
      " Set highlight colors (optional, but nice)
      " Try installing a colorscheme plugin later, for now built-in ones are okay
      " Example: set colorscheme industry
      
      " --- Plugin Specific Settings ---
      " ALE settings
      let g:ale_fix_on_save = 1     " Auto-fix (format) code when you save using configured fixers (like autopep8/black)
      " Configure which linters/fixers ALE should use (ALE auto-detects some)
      " This explicitly tells ALE to use flake8 for linting and autopep8 for fixing Python files
      let g:ale_linters = {'python': ['flake8']}
      let g:ale_fixers = {'python': ['autopep8']}
      
      " NERDTree settings
      " Open NERDTree automatically when Vim starts without arguments (e.g., just 'vim')
      autocmd VimEnter * if !argc() | NERDTree | endif
      " Close Vim if the only window remaining is NERDTree
      autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | quit | endif
      
      " --- End of .vimrc ---
      
    6. Install the Plugins:

      • Open iTerm2.
      • Start Vim: vim
      • Type this command inside Vim and press Enter: :PlugInstall
      • Vim will download and install the plugins. Once done, close Vim (:q).
    7. Running Python Code:

      • Remember, Vim is an editor. You write code in Vim, save it (:w), but you run it from the terminal.
      • You will need two iTerm2 tabs/panes: one running Vim for editing, and one for running your Python script (python your_script.py), using pip install for libraries, etc.

    How to Use This Setup (Basic Workflow):

    1. Open iTerm2.
    2. Navigate to your project directory (cd your/project/path).
    3. Start Vim: vim your_script.py. (If you just type vim, NERDTree should open automatically).
    4. Use NERDTreeToggle (:NERDTreeToggle) to open/close the file explorer pane. Navigate with arrow keys and press o to open files.
    5. Edit your code. ale will show linting errors/warnings as you type or on saving.
    6. Save your file: Press Esc, type :w, press Enter.
    7. Switch to your other iTerm2 tab/pane (or split the current one using Cmd+D in iTerm2) in the same directory.
    8. Run your script: python your_script.py.
    9. Switch back to your Vim tab/pane to continue editing.

    Why this is good for a beginner:

    • Minimal Cognitive Load: You're learning Vim commands (i for insert, Esc for normal mode, :w save, :q quit, basic movement) and how .vimrc works. You're not simultaneously figuring out Neovim differences, tmux sessions, or complex debugger configurations.
    • Immediate Benefit: You get usable syntax highlighting, a file tree (like PyCharm), and real-time code checking/basic formatting (ale), which directly replaces some core PyCharm feedback loops.
    • Clear Path Forward: This setup provides a solid foundation. Once you're comfortable with Vim basics, you can then explore things like better autocompletion (LSP, which might eventually lead you to Neovim), advanced code navigation, snippets, tmux for terminal management, and eventually debugging tools.

    This setup gives you the essential power-editing core of Vim plus critical Python development feedback, while keeping the initial learning curve as gentle as possible compared to jumping headfirst into a fully-decked-out Neovim/LSP/tmux configuration. Good luck! It's a journey, but a rewarding one.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.