Skip to content
TheChatArchiveThe Chat Archive
Claudeclaude-opus-4-20250514· AnthropicHugging Face LMArena Human Preference 140K

which energy has higher PDD surface dose? 6X or 10X? why

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Qwenqwq-32b’s answer.
  1. User

    which energy has higher PDD surface dose? 6X or 10X? why

  2. Claude Assistant

    6X photon beams have a higher surface dose (higher PDD at the surface) than 10X photon beams.

    This occurs because lower energy photon beams have:

    1. More low-energy photons - 6X beams contain a higher proportion of low-energy photons compared to 10X beams. These low-energy photons are more likely to interact near the surface through photoelectric and Compton interactions.

    2. Shorter buildup region - The depth of maximum dose (dmax) for 6X is typically around 1.5 cm, while for 10X it's around 2.5 cm. This shorter buildup distance means the dose rises more steeply from the surface to dmax.

    3. More scatter contribution at shallow depths - Lower energy beams produce more scatter radiation that deposits dose at shallow depths, contributing to higher surface dose.

    4. Less penetrating power - The lower energy photons in 6X beams are absorbed more readily in the first few millimeters of tissue.

    Typical surface dose values (as percentage of maximum dose):

    • 6X: approximately 15-20%
    • 10X: approximately 10-15%

    This difference in surface dose is clinically significant - the lower surface dose of higher energy beams is often preferred when treating deeper tumors to spare skin and superficial tissues, while lower energies might be chosen for more superficial targets where skin dose is less of a concern.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt