Skip to content
TheChatArchiveThe Chat Archive
Amazon Novaamazon-nova-experimental-chat-05-14· AmazonHugging Face LMArena Human Preference 140K

Ok i just wiped my pc and now setting up win 10. I just installed a 5070ti and got no…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-sonnet-4-20250514-thinking-32k’s answer.
  1. User

    Ok i just wiped my pc and now setting up win 10. I just installed a 5070ti and got no display so i swapped back to my 5700xt to wipe my system. How can i get my 5070ti to work now

  2. Amazon Nova Assistant

    Congratulations on setting up Windows 10 and installing your new GPU! Let's get your GeForce RTX 5070 Ti (assuming you meant RTX 4070 Ti, as there is no 5070 Ti) up and running. Here’s a step-by-step guide to troubleshoot and resolve the "no display" issue:

    Step 1: Physical Installation

    1. Ensure Proper Seating:

      • Power off your PC and unplug it.
      • Open your case and ensure the RTX 4070 Ti is properly seated in the PCIe slot.
      • Check that the retention clip is secured.
      • Ensure any required power cables from your power supply are firmly connected to the GPU.
    2. Check Power Supply:

      • The RTX 4070 Ti requires sufficient power. Ensure your power supply (PSU) meets the recommended wattage and has the necessary PCIe power connectors.
      • Typically, the RTX 4070 Ti requires two 8-pin PCIe power connectors. Make sure they are both connected.

    Step 2: BIOS Settings

    1. Enter BIOS:

      • Restart your PC and enter the BIOS/UEFI settings. This is usually done by pressing a key such as Del, F2, or Esc during boot. The correct key is usually displayed on the initial boot screen.
    2. Set Primary Display:

      • In the BIOS, ensure the primary display is set to PCIe or Discrete Graphics. Sometimes it may default to Integrated Graphics if it doesn't detect the GPU properly
      • Save and exit the BIOS.

    Step 3: Install Drivers

    1. Connect to Integrated Graphics (if available):
      • If your CPU has integrated graphics you may need to reinstall the 5700xt temporarily to connect to a display.
    2. Download Drivers:
      • Connect to the internet and go to the NVIDIA Driver Download page.
      • Download the latest drivers for the RTX 4070 Ti. You can either download the “GeForce Game Ready Driver” or use the “NVIDIA GeForce Experience” application to automatically find and install the correct drivers.
    3. Install Drivers:
      • Reinstall the 4070ti
      • Run the downloaded driver installer and follow the on-screen instructions.
      • If you downloaded the offline installer, choose the “Custom (Advanced)” installation option and make sure to check “Perform a clean installation.”
      • Restart your PC if prompted.

    Step 4: Verify Connection

    1. Display Cable:

      • Ensure your monitor is connected to the RTX 4070 Ti and not the motherboard’s integrated graphics port.
      • Try using a different display cable (HDMI, DisplayPort, etc.) to rule out a faulty cable.
    2. Monitor Input:

      • Make sure your monitor is set to the correct input source corresponding to the port you are using on the RTX 4070 Ti.

    Step 5: Troubleshooting

    1. Safe Mode:
      • If you still don't get a display, boot into Safe Mode by holding the Shift key and restarting your PC. Once in Safe Mode, you can try updating or reinstalling the drivers.
    2. DDU (Display Driver Uninstaller):
      • If you had previous drivers installed (e.g., for the 5700 XT), it’s a good idea to use Display Driver Uninstaller (DDU) to completely remove old drivers.
      • Boot into Safe Mode with Networking.
      • Run DDU, select the old drivers, and clean.
      • Restart your PC and then install the new RTX 4070 Ti drivers.
    3. Check for BIOS Updates:
      • Sometimes updating your motherboards BIOS can resolve compatibility issues.
      • Visit your motherboard manufacturer's website and check if there is a BIOS update available. Follow their instructions to update the BIOS if necessary.

    Step 6: Final Check

    1. Reboot:
      • After installing the drivers, reboot your PC.
      • You should now see the display output from your RTX 4070 Ti.

    If you've followed all these steps and still do not have a display, there may be an issue with the GPU itself. In that case, consider testing the GPU in another system if possible, or contact the manufacturer for an RMA (Return Merchandise Authorization).

    Good luck, and I hope you get your RTX 4070 Ti working smoothly!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.