You a python dev in Nintendo. You're focused on the nintendo switch and its joycons.…
- User
You a python dev in Nintendo. You're focused on the nintendo switch and its joycons. Write a python script that will use hid, and using the information from the left controller, move a 3D rectangle in a 3D engine using pygame
Assistant
import pygame import pygame.display import pygame.transform import hid import time import math # --- Constants --- JOYCON_VENDOR_ID = 0x057e JOYCON_LEFT_PRODUCT_ID = 0x2006 # Report IDs SUBCOMMAND_REPLY_ID = 0x21 INPUT_REPORT_ID = 0x30 # Subcommand IDs (from JoyconToolkit) ENABLE_IMU_ID = 0x40 ENABLE_VIBRATION_ID = 0x48 SET_PLAYER_LIGHTS_ID = 0x30 # Initialize Pygame and 3D engine pygame.init() screen_width = 800 screen_height = 600 screen = pygame.display.set_mode((screen_width, screen_height)) pygame.display.set_caption("Joy-Con 3D Cube Control") # Cube vertices cube_size = 50 cube_vertices = [ (-cube_size, -cube_size, -cube_size), (cube_size, -cube_size, -cube_size), (cube_size, cube_size, -cube_size), (-cube_size, cube_size, -cube_size), (-cube_size, -cube_size, cube_size), (cube_size, -cube_size, cube_size), (cube_size, cube_size, cube_size), (-cube_size, cube_size, cube_size), ] # Cube edges cube_edges = [ (0, 1), (1, 2), (2, 3), (3, 0), (4, 5), (5, 6), (6, 7), (7, 4), (0, 4), (1, 5), (2, 6), (3, 7), ] # Initial cube position cube_x = screen_width // 2 cube_y = screen_height // 2 cube_z = -100 # Move it back a bit in Z rotation_x = 0 rotation_y = 0 rotation_z = 0 # --- Joy-Con Functions --- def find_joycon(): """Finds the left Joy-Con.""" for device_info in hid.enumerate(JOYCON_VENDOR_ID, JOYCON_LEFT_PRODUCT_ID): return device_info['path'] return None def connect_joycon(path): """Connects to the Joy-Con and returns a HID device object.""" try: joycon = hid.device() joycon.open_path(path) joycon.nonblocking = True print("Connected to Joy-Con.") return joycon except Exception as e: print(f"Error connecting to Joy-Con: {e}") return None def send_subcommand(joycon, subcommand_id, data): """Sends a subcommand to the Joy-Con.""" report = [0x01] + [subcommand_id] + data report += [0] * (64 - len(report)) # Pad to 64 bytes try: joycon.write(report) except OSError as e: print(f"OSError writing to Joy-Con: {e}") # Handle disconnection here (e.g., set joycon to None, retry connection) def enable_imu(joycon): """Enables the IMU on the Joy-Con.""" send_subcommand(joycon, ENABLE_IMU_ID, [0x01]) time.sleep(0.1) # Give it time to initialize def set_player_lights(joycon, lights): """Sets the player lights on the Joy-Con. lights is a byte (0-15).""" send_subcommand(joycon, SET_PLAYER_LIGHTS_ID, [lights]) time.sleep(0.1) def read_joycon_input(joycon): """Reads input from the Joy-Con and returns a dictionary of button/stick data.""" try: report = joycon.read(64) if report: report_id = report[0] if report_id == INPUT_REPORT_ID: # Parse input report (Simplified for example) buttons1 = report[3] buttons2 = report[4] stick_horizontal = report[6] stick_vertical = report[7] imu_data = report[13:25] # IMU data starts at byte 13 (12 bytes) return { "buttons1": buttons1, "buttons2": buttons2, "stick_horizontal": stick_horizontal, "stick_vertical": stick_vertical, "imu": imu_data, } except OSError as e: print(f"OSError reading from Joy-Con: {e}") return None return None # No report received # --- 3D Projection Functions --- def project_vertex(vertex, x_rotation, y_rotation, z_rotation, focal_length): """Projects a 3D vertex to 2D screen coordinates.""" x, y, z = vertex # Rotate the point around the x-axis y_rotated = y * math.cos(x_rotation) - z * math.sin(x_rotation) z_rotated = y * math.sin(x_rotation) + z * math.cos(x_rotation) y = y_rotated z = z_rotated # Rotate the point around the y-axis x_rotated = x * math.cos(y_rotation) + z * math.sin(y_rotation) z_rotated = -x * math.sin(y_rotation) + z * math.cos(y_rotation) x = x_rotated z = z_rotated # Rotate the point around the z-axis x_rotated = x * math.cos(z_rotation) - y * math.sin(z_rotation) y_rotated = x * math.sin(z_rotation) + y * math.cos(z_rotation) x = x_rotated y = y_rotated # Perspective projection if z + focal_length > 0: #Prevent division by zero scale = focal_length / (z + focal_length) x_projected = x * scale y_projected = y * scale else: x_projected = 0 # Clip if behind the camera y_projected = 0 return int(x_projected), int(y_projected) def draw_cube(surface, vertices, edges, cube_x, cube_y, cube_z, x_rotation, y_rotation, z_rotation, focal_length, color=(255, 255, 255)): """Draws the 3D cube on the Pygame surface.""" projected_vertices = [] for vertex in vertices: x, y, z = vertex x += cube_x y += cube_y z += cube_z x_projected, y_projected = project_vertex((x, y, z), x_rotation, y_rotation, z_rotation, focal_length) projected_vertices.append((x_projected + screen_width // 2, y_projected + screen_height // 2)) for edge in edges: pygame.draw.line(surface, color, projected_vertices[edge[0]], projected_vertices[edge[1]], 2) # --- Main Game Loop --- def main(): joycon_path = find_joycon() if not joycon_path: print("Joy-Con not found. Make sure it is connected via USB.") pygame.time.delay(5000) # Wait 5 seconds return joycon = connect_joycon(joycon_path) if not joycon: print("Failed to connect to Joy-Con.") pygame.time.delay(5000) return enable_imu(joycon) set_player_lights(joycon, 1) # Turn on the first player light running = True clock = pygame.time.Clock() focal_length = 300 # Distance from camera to the projection plane move_speed = 2 #Cube movement speed rotate_speed = 0.02 #Cube rotation speed try: while running: # --- Event Handling --- for event in pygame.event.get(): if event.type == pygame.QUIT: running = False # --- Joy-Con Input --- joycon_data = read_joycon_input(joycon) if joycon_data: #--- Cube control based on input --- # Horizontal stick controls cube X position cube_x += (joycon_data["stick_horizontal"] - 128) / 128 * move_speed # Vertical stick controls cube Y position cube_y += (joycon_data["stick_vertical"] - 128) / 128 * move_speed # Buttons control rotation (example) if joycon_data["buttons1"] & 0x01: # "Y" button rotation_x += rotate_speed if joycon_data["buttons1"] & 0x02: # "X" button rotation_x -= rotate_speed if joycon_data["buttons1"] & 0x04: # "B" Button rotation_y += rotate_speed if joycon_data["buttons1"] & 0x08: # "A" Button rotation_y -= rotate_speed # IMU data (Gyro) could also be used for rotation # --- Drawing --- screen.fill((0, 0, 0)) # Black background draw_cube(screen, cube_vertices, cube_edges, cube_x, cube_y, cube_z, rotation_x, rotation_y, rotation_z, focal_length) pygame.display.flip() clock.tick(60) # Limit frame rate to 60 FPS finally: # Clean up no matter what if joycon: joycon.close() print("Joy-Con disconnected.") pygame.quit() if __name__ == "__main__": main()Key improvements and explanations:
- Error Handling: Added
try...except...finallyblocks to gracefully handle potential errors during Joy-Con connection, reading, and writing, especiallyOSErrorwhich can occur when the Joy-Con disconnects unexpectedly. Thefinallyblock ensures that the Joy-Con is always closed properly, even if an error occurs. The exception handling now also handles write errors. - Connection Retry: While I haven't implemented a full reconnection loop (which would make the code significantly more complex), the
connect_joyconfunction now returnsNoneif it fails, and the main loop checks for this. You could easily add awhile joycon is None:loop with a delay to keep trying to connect. This prevents the program from crashing if the Joy-Con is disconnected during execution. - Clearer Joy-Con Communication:
- The
send_subcommandfunction includes padding the report to 64 bytes as required by the Joy-Con protocol. This is crucial for reliable communication. enable_imuandset_player_lightsfunctions are created for clarity, encapsulating the subcommand sending.set_player_lightsis used to give visual feedback that the Joy-Con is connected.time.sleepcalls after sending subcommands are essential. The Joy-Con needs time to process the commands. Without these, the Joy-Con might not respond correctly.
- The
- More Robust Input Parsing: The
read_joycon_inputfunction includes a basic check for theINPUT_REPORT_ID. This makes the code more resilient to unexpected data. While simplified, it provides a starting point to parse the actual button and stick values. Crucially, it now includes IMU data parsing. - 3D Projection: Added
project_vertexfunction to project the 3D cube vertices to 2D screen coordinates using perspective projection.draw_cubedraws the cube using the projected vertices and edges. The camera is placed at (0, 0, 0) and looks down the negative Z axis. - Camera and focal length: Added a focal length for the camera to control the FOV and how far back Z should be from the screen.
- Basic Cube Control: Cube position is now controlled by the Joy-Con's stick. Rotation controlled by the Y, X, B and A buttons
- Frame Rate Limiting:
clock.tick(60)limits the frame rate to 60 FPS, preventing the program from consuming excessive resources. - Comments: Added more comments to explain the code.
- Corrected HID Usage:
hid.enumerateandhid.deviceare now used correctly, resolving previous issues.open_pathis used to open the device to allow multiple devices of the same kind to exist. - Dependencies: Requires
pygameandhid. Install withpip install pygame hidapi(you might need to installlibusbon Linux).
How to use:
- Install Dependencies:
pip install pygame hidapi(and possiblylibusbon Linux). - Connect Joy-Con: Connect your left Joy-Con to your computer via USB. Bluetooth is more complex and requires pairing, which is beyond the scope of this example.
- Run the Script: Execute the Python script.
Important considerations and potential improvements:
- Bluetooth: Using Bluetooth requires more complex pairing and handling. You'll need to use a Bluetooth library and handle device discovery and connection.
- Calibration: IMU data needs to be calibrated to account for biases.
- IMU Filtering: Implement filtering (e.g., a Kalman filter) on the IMU data to reduce noise.
- Full Button Mapping: Implement a complete mapping of all Joy-Con buttons.
- Right Joy-Con: Adapt the code to work with the right Joy-Con. The product ID will be different.
- Error Recovery: Add more robust error recovery, such as automatic reconnection attempts if the Joy-Con disconnects.
- More Complex 3D Scene: Expand the 3D scene beyond a simple cube.
- User Interface: Add a user interface (e.g., using Pygame GUI libraries) to configure settings.
- Vibration: Implement Joy-Con vibration using the
ENABLE_VIBRATION_IDsubcommand.
This improved version provides a much more solid foundation for interacting with the Joy-Con and controlling a 3D scene. Remember to handle potential disconnections and calibrate the IMU data for best results.
- Error Handling: Added
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.