Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-pro-preview-05-06· GoogleHugging Face LMArena Human Preference 140K

The background scrolls in the direction given in the angle argument. Also, this version…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with chatgpt-4o-latest-20250326’s answer.
  1. User

    The background scrolls in the direction given in the angle argument. Also, this version ends up being slower than the original. Do you know why, or is thta just the limit of this approach

  2. Gemini Assistant

    Okay, you're absolutely right! My previous attempt to adjust loop boundaries based on cos * speed was flawed, especially the part that could lead to 3 * width loop spans. That would explain the slowdown. My apologies!

    The key is indeed simpler: the angle dictates the direction of scroll, and speed dictates the magnitude along that direction. The bgScrollOffset increases, and its components bgScrollOffset * cos and bgScrollOffset * sin determine the shift.

    Let's correct the logic for the loop boundaries. We need to ensure we draw enough to cover the canvas (0 to width, 0 to height) considering the maximum possible shift caused by bgScrollOffset (which is 300).

    1. Maximum shift:

      • Maximum horizontal shift component: 300 * cos(radBgAngle)
      • Maximum vertical shift component: 300 * sin(radBgAngle)
    2. Determining loop range for x (and y similarly):

      • The values x and y in your loop are the base positions for the grid elements.
      • The actual drawing position on canvas for an element's origin is xOffset = x + 20 + (bgScrollOffset * cos) and yOffset = y + 20 + (bgScrollOffset * sin).
      • We need these xOffset and yOffset to cover the canvas area.

      Let's analyze the range needed for x + 20 (let's call it XPrime):

      • If cos > 0: The pattern scrolls right. bgScrollOffset * cos is positive. XPrime needs to start from -(300 * cos) (so when fully scrolled, it starts at 0 on canvas) and go up to width (so it covers the right edge before scrolling off). The span for XPrime is width + (300 * cos).
      • If cos < 0: The pattern scrolls left. bgScrollOffset * cos is negative. XPrime needs to start from 0 (to cover the left edge as pattern scrolls onto it) and go up to width - (300 * cos) (which is width + 300 * |cos|, so it covers the right edge when fully scrolled left). The span for XPrime is width - (300 * cos).

      In both cases, the span of XPrime values needed is width + 300 * Math.abs(cos). Similarly, the span for YPrime (which is y + 20) is height + 300 * Math.abs(sin).

    3. Setting loop start and end for x:

      • If cos >= 0 (scrolling right or no horizontal scroll): x_iter_start = -(300 * cos) - 20; // Start for the x loop variable x_iter_end = width - 20;
      • If cos < 0 (scrolling left): x_iter_start = -20; x_iter_end = width - (300 * cos) - 20; // -(300*cos) is positive here

      This can be written more compactly. And we add a little margin (e.g., one grid step 40) to ensure items are drawn just outside the bounds before they scroll in.

    Here's the revised and hopefully correct (and faster) version:

    // Assuming these are defined globally or passed in:
    // let bgCtx, bgCanvas, width, height, trigFnValues = {}, bgScrollOffset = 0;
    
    function drawBackground(angle, speed) {
        // console.time("background"); // Consider enabling if you want to measure this specific version
    
        // Clear the canvas
        bgCtx.clearRect(0, 0, bgCanvas.width, bgCanvas.height);
    
        // Draw the background color
        bgCtx.fillStyle = "black";
        bgCtx.fillRect(0, 0, width, height); // Use actual canvas width/height if different
    
        // Set up styles
        bgCtx.fillStyle = "#181818";
        bgCtx.font = "20px monospace";
    
        // Precompute constants
        const radBgAngle = angle * Math.PI / 180;
        trigFnValues[radBgAngle] ??= {
            cos: Math.cos(radBgAngle),
            sin: Math.sin(radBgAngle)
        };
        const { sin, cos } = trigFnValues[radBgAngle];
        bgScrollOffset = (bgScrollOffset + speed) % 300;
    
        const gridStep = 40;
        const charOffset = 20; // The "+ 20" used to center characters
        const maxScroll = 300;
    
        // Determine the range of base coordinates needed for x
        let xStart, xEnd;
        if (cos >= 0) {
            // Scrolls right or vertically: content appears from left
            xStart = -(maxScroll * cos) - charOffset;
            xEnd = width - charOffset;
        } else {
            // Scrolls left: content appears from right
            xStart = -charOffset;
            xEnd = width - (maxScroll * cos) - charOffset; // cos is negative, so this adds to width
        }
        // Add margin for grid steps
        xStart -= gridStep;
        xEnd += gridStep;
    
        // Determine the range of base coordinates needed for y
        let yStart, yEnd;
        if (sin >= 0) {
            // Scrolls down or horizontally: content appears from top
            yStart = -(maxScroll * sin) - charOffset;
            yEnd = height - charOffset;
        } else {
            // Scrolls up: content appears from bottom
            yStart = -charOffset;
            yEnd = height - (maxScroll * sin) - charOffset; // sin is negative, so this adds to height
        }
        // Add margin for grid steps
        yStart -= gridStep;
        yEnd += gridStep;
    
        // Save the context state once
        bgCtx.save();
    
        // Outer loop for y-axis
        for (let y = yStart; y < yEnd; y += gridStep) {
            const yCanvasPos = y + charOffset + (bgScrollOffset * sin);
    
            // Inner loop for x-axis
            for (let x = xStart; x < xEnd; x += gridStep) {
                const xCanvasPos = x + charOffset + (bgScrollOffset * cos);
    
                // Apply transformation
                bgCtx.setTransform(cos, sin, -sin, cos, xCanvasPos, yCanvasPos);
    
                // Draw the text
                bgCtx.fillText(">", 0, 0);
            }
        }
    
        // Restore the context state once
        bgCtx.restore();
    
        // console.timeEnd("background");
    }
    
    // Example usage (ensure canvas, width, height are set up)
    // Assuming:
    // const bgCanvas = document.getElementById('bgCanvas');
    // const bgCtx = bgCanvas.getContext('2d');
    // const width = bgCanvas.width;
    // const height = bgCanvas.height;
    // let trigFnValues = {};
    // let bgScrollOffset = 0;
    // let currentAngle = 0;
    // function gameLoop() {
    //     currentAngle = (currentAngle + 0.1) % 360;
    //     drawBackground(currentAngle, 1);
    //     requestAnimationFrame(gameLoop);
    // }
    // gameLoop();
    

    Explanation of the boundary logic:

    1. charOffset = 20: This is the offset you add (x + 20, y + 20) before applying the scroll and transform.
    2. maxScroll = 300: The maximum value bgScrollOffset contributes.
    3. For x (Horizontal):
      • xActual = x + charOffset: This is the base position of the character before scroll.
      • xCanvasPos = xActual + bgScrollOffset * cos.
      • If cos >= 0 (pattern scrolls right or only vertically):
        • New characters appear from the left.
        • The leftmost xActual needs to be -(maxScroll * cos) so that when bgScrollOffset is max, xCanvasPos starts near 0.
        • The rightmost xActual needs to be width so that it covers the canvas width.
        • So, x (loop variable) ranges from -(maxScroll * cos) - charOffset to width - charOffset.
      • If cos < 0 (pattern scrolls left):
        • New characters appear from the right.
        • The leftmost xActual needs to be 0.
        • The rightmost xActual needs to be width - (maxScroll * cos) (since cos is negative, -(maxScroll * cos) is positive, effectively width + max_shift_amount).
        • So, x ranges from -charOffset to width - (maxScroll * cos) - charOffset.
    4. Margin: xStart -= gridStep; xEnd += gridStep; This adds one grid step of margin on both sides to ensure characters that are partially visible or about to become visible are drawn.
    5. The logic for y is analogous.

    This approach calculates the minimum necessary span for the base x and y coordinates. The number of iterations should be: (span_x / gridStep) * (span_y / gridStep) where span_x is roughly width + (maxScroll * Math.abs(cos)) + 2 * gridStep and span_y is roughly height + (maxScroll * Math.abs(sin)) + 2 * gridStep.

    Compared to the original (-width/2 to width*1.5) which is a span of 2*width, this new span width + 300*|cos| (plus margins) should often be smaller:

    • If |cos| is small (angle near 90/270), span is ~width. Original 2*width. Big saving.
    • If |cos| is 1 (angle near 0/180), span is ~width + 300. Original 2*width.
      • If width = 800, new span ~1100. Original 1600. Still a saving.
      • If width = 200, new span ~500. Original 400. Here, the original might be slightly better if 300 > width. However, the + 2*gridStep margin might make them comparable.

    The crucial part is that this logic avoids the massive 3*width span that my previous incorrect attempt created. The overhead of these few calculations for xStart, xEnd, yStart, yEnd once per drawBackground call should be negligible compared to the savings in loop iterations.

    Test this version. It should be more performant than the original in most cases, and definitely faster than the buggy version I provided earlier.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.