Skip to content
The Chat Archive
qwen3-235b-a22b· Alibaba (Qwen) LMArena Human Preference 140K

Goal 3: "I need to remove the Wi-Fi/WWAN whitelist." If you are trying to install an…

  1. User

    Goal 3: "I need to remove the Wi-Fi/WWAN whitelist." If you are trying to install an unsupported network card.

    The Reality: Lenovo significantly relaxed their whitelisting policies several generations ago. While they still exist for WWAN (cellular) cards sometimes, Wi-Fi whitelists are largely gone on the P14s Gen 4. Are you actually getting a "Unauthorized Network Adapter" error, or are you assuming you will? i am trying to do this

  2. Assistant

    Got it! You're trying to install an unauthorized WWAN card (like a mobile broadband card) and hitting the "Unauthorized Network Adapter" error. Let’s break this down for your ThinkPad P14s Gen 4 AMD (21K5).


    🔍 Key Facts About Your Laptop

    1. Wi-Fi Whitelist Status:

      • Wi-Fi cards (M.2 2230/2242) are generally not whitelisted on the P14s Gen 4. You can use any PCIe Wi-Fi card (e.g., Intel AX211, AX201, AX501, etc.) without BIOS mods.
      • WWAN cards (Mobile broadband) are still whitelisted in the BIOS. This is what you're encountering.
    2. Security Restrictions:

      • Removing the WWAN whitelist requires modifying the BIOS, but as discussed earlier, this is extremely risky on modern ThinkPads due to:
        • AMD Platform Secure Boot (PSB) – Can brick the laptop permanently.
        • BIOS signature verification – Prevents unsigned BIOS flashes.
    3. Your Best Bet:

      • Use Smokeless-UMAF (no BIOS flash required) or patch the BIOS with a hardware programmer (high-risk path).

    ✅ Safe Approach: Use Smokeless-UMAF First

    This method avoids flashing entirely and works directly on your hardware.

    Step-by-Step:

    1. Download Smokeless-UMAF:

      • Get the latest build from Smokeless-UMAF GitHub.
      • Extract the .img file (e.g., Smokeless-UMAF-vX.XX.img).
    2. Create a Bootable USB Stick:

      • Use Rufus to write the .img to a USB stick.
      • Select "DD Image" mode during Rufus setup.
    3. Boot into Smokeless-UMAF:

      • Disable Secure Boot in Windows Settings > Update & Security > Recovery > Advanced Startup > UEFI Settings.
      • Reboot and boot from the USB stick.
    4. Access Hidden BIOS Settings:

      • In Smokeless-UMAF, navigate to:
        Advanced > Device Config > WWAN Whitelist
        (Exact path may vary slightly depending on BIOS version.)
      • Look for an option like "WWAN Whitelist Enforcement" or "Allow Non-Whitelisted WWAN".
      • Enable it, save settings, and reboot.
    5. Install Your WWAN Card:

      • Insert the unsupported WWAN card (e.g., Sierra EM7455, Fibocom L850-GL).
      • Windows should now recognize it without errors.

    🟢 Pros: No risk of bricking, reversible, no hardware tools needed.
    🔴 Cons: May not work if your BIOS version lacks the WWAN toggle in UMAF.


    ⚠️ Last-Resort Approach: BIOS Whitelist Removal via Hardware Flashing

    If Smokeless-UMAF fails (e.g., no WWAN toggle), you’ll need to:

    1. Extract the BIOS chip (SOIC-8 or WSON package).
    2. Modify the BIOS image to disable whitelist checks.
    3. Flash it back with a hardware programmer (CH341A, Dediprog, etc.).

    Risks:

    • AMD PSB: If enabled, even a perfect BIOS flash will result in a brick (CPU refuses to boot).
    • No recovery: Most ThinkPads lack a secondary BIOS chip.

    Tools Required:

    • CH341A SPI programmer (~$10 on Amazon/Alibaba).
    • 3M Scotch Tape (for SOIC-8 chips – see "clip method" guides).
    • BIOS editing tools: UEFITool, AMI BIOS Mod Tool (ABMT), Hex Editor.

    Steps (High-Level):

    1. Backup the BIOS:

      • Physically connect the CH341A to the BIOS chip.
      • Use flashrom or UEFITool to dump the BIOS.
    2. Locate Whitelist Code:

    3. Patch the BIOS:

      • Disable whitelist checks (e.g., change 01 to 00 in specific registers).
    4. Flash the Modified BIOS:

      • Use the CH341A to write the patched BIOS back to the chip.
    5. Reinstall and Test:

      • Boot the laptop, insert the WWAN card, and verify functionality.

    🟠 Only attempt this if you’re comfortable with hardware hacking and have a backup plan (e.g., desoldering station or spare BIOS chip).


    🔧 Alternative: Use a Whitelist-Free WWAN Card

    If your goal is to use mobile broadband, consider using a pre-unlocked WWAN card like:

    • Sierra Wireless EM7455 (widely supported, easy to unlock).
    • Fibocom L850-GL (5G-capable, no whitelist restrictions).

    These cards often bypass Lenovo’s checks without BIOS mods.


    Final Recommendation:

    1. Test your WWAN card first: Some "unauthorized" cards work out of the box.
    2. Try Smokeless-UMAF: It’s the safest way to toggle hidden settings.
    3. Only use hardware flashing as a last resort if you’ve confirmed the whitelist is enforced and you’re comfortable with the risks.

    Let me know what you want to try next!

  3. User

    Sierra Wireless EM7455 (widely supported, easy to unlock). i have this one but it wont appear

  4. Assistant

    If your Sierra Wireless EM7455 WWAN card isn’t appearing in the P14s Gen 4, let’s troubleshoot step-by-step. This card is generally well-supported, so the issue is likely related to BIOS settings, drivers, or hardware configuration.


    🔍 Step 1: Basic Checks

    1. Physical Installation:

      • Ensure the card is fully seated in the M.2 WWAN slot (usually labeled "WWAN" or "WLAN").
      • Check that the two antenna cables (labeled "Main" and "Aux") are connected to the card. Without these, the card won’t function.
      • Confirm the card is secured with a screw (if applicable).
    2. Airplane Mode:

      • Disable Airplane Mode in Windows:
        Settings > Network & Internet > Airplane Mode.
      • Some laptops also have a hardware RF kill switch (e.g., a physical button or Fn+key combo). Try toggling it.
    3. SIM Card:

      • Insert a valid SIM card (even an expired one) into the WWAN slot. Some cards require a SIM presence to initialize.

    🔍 Step 2: Driver Installation

    The EM7455 requires specific drivers to be recognized by Windows. If they’re missing or outdated:

    1. Check Device Manager:

      • Press Win + X > Device Manager.
      • Look for "Modems" or "Network Adapters". If the EM7455 appears under "Other Devices" with a yellow exclamation mark, drivers are missing.
    2. Install Sierra Wireless Drivers:

    3. Manual Driver Installation:

      • Extract the downloaded driver package.
      • In Device Manager, right-click the EM7455 device > Update Driver > Browse my computer > Select the driver folder.

    🔍 Step 3: BIOS Settings

    Even if the card is physically installed and drivers are installed, the BIOS might still block it due to whitelist enforcement.

    A. Use Smokeless-UMAF to Toggle WWAN Whitelist:

    1. Boot into Smokeless-UMAF (as described earlier).
    2. Navigate to:
      Advanced > Device Config > WWAN Whitelist
    3. Look for options like:
      • WWAN Whitelist Enforcement → Disable
      • Allow Non-Whitelisted WWAN → Enable
    4. Save and reboot.

    B. Check BIOS Version:

    • Newer BIOS versions may have relaxed whitelist enforcement.
      Check your current BIOS version in Windows:
      Win + R > msinfo32 > BIOS Version/Date
    • Compare it to the latest BIOS from Lenovo:
      Lenovo Support Page for P14s Gen 4 AMD

    🔍 Step 4: Test with Another WWAN Card

    If the EM7455 still doesn’t appear, test with a different WWAN card (e.g., Fibocom L850-GL) to rule out hardware failure.

    Fibocom L850-GL (Alternative Option):

    • Works out of the box on most ThinkPads without BIOS mods.
    • 4G/5G capable, no whitelist restrictions.
    • Purchase from eBay or Amazon (e.g., L850-GL on eBay).

    🔍 Step 5: Hardware Flashing (Last Resort)

    If you’ve confirmed the BIOS is enforcing the WWAN whitelist and Smokeless-UMAF doesn’t work, you’ll need to:

    1. Extract the BIOS chip (SOIC-8 or WSON package).
    2. Patch the BIOS to disable whitelist checks.
    3. Flash it back using a CH341A programmer.

    Risks:

    • AMD PSB: If enabled, the laptop will brick permanently.
    • No recovery: Most ThinkPads lack a secondary BIOS chip.

    Tools Required:

    • CH341A SPI programmer (~$10).
    • UEFITool, AMI BIOS Mod Tool (ABMT), or Hex Editor.
    • Backup BIOS image (critical!).

    Resources:


    ✅ Final Checklist

    StepActionStatus
    1Confirm card is seated with antenna cables✅
    2Disable Airplane Mode and check SIM card✅
    3Install Sierra Wireless drivers✅
    4Use Smokeless-UMAF to disable WWAN whitelist✅
    5Test with Fibocom L850-GL (alternative card)✅
    6Hardware flashing (only if desperate)⚠️

    Let me know what works! If you’re still stuck, share:

    • Screenshots of Device Manager.
    • Your BIOS version/date.
    • Whether Smokeless-UMAF showed a WWAN whitelist toggle.
  5. User

    it pops up under sensors (gps) but not anywhere else

  6. Assistant

    If your Sierra Wireless EM7455 only appears under Sensors (GPS) in Device Manager and not as a WWAN modem, here's a step-by-step breakdown of what's likely happening and how to fix it:


    🚨 Root Cause

    The EM7455 is a multi-function card that includes GPS, WWAN (mobile broadband), and USB serial interfaces. When it only shows up under "Sensors," Windows is detecting the GPS module but not the WWAN modem component. This typically happens due to:

    1. Missing/incorrect drivers for the WWAN modem interface.
    2. BIOS-enforced WWAN whitelist blocking full initialization.
    3. Hardware detection issues (e.g., incorrect PCIe link, missing power).

    ✅ Step-by-Step Fix

    1. Verify Physical Installation

    • Antenna Cables: Ensure both Main and Aux antenna cables are connected to the EM7455. Without these, the WWAN radio won’t initialize.
    • SIM Card: Insert a valid SIM card (even an expired one). Some cards require SIM presence to enable WWAN functionality.
    • PCIe Slot: Confirm the card is fully seated in the WWAN M.2 slot (usually labeled "WWAN" or "WLAN").

    2. Install Full Sierra Wireless Drivers

    Even if you installed drivers earlier, the EM7455 requires multiple drivers for different interfaces (WWAN, GPS, USB serial). Follow these steps:

    1. Download the Latest Driver Package:

      • From Sierra Wireless: EM7455 Drivers
      • Example: SWI9X15C_2.22_02.28.cdc (or newer version).
    2. Extract the Driver Folder:

      • Use 7-Zip or WinRAR to unpack the downloaded .exe file. Look for a folder containing .inf files (e.g., QMIWWAN, SierraWireless).
    3. Install All Driver Components:

      • Open Device Manager.
      • Right-click the GPS device under Sensors > Update Driver > Browse my computer.
      • Navigate to the extracted driver folder and install all applicable drivers (WWAN, GPS, USB Serial).
      • Repeat for any devices under "Other Devices" (e.g., "Sierra Wireless EM7455" or "USB Serial Port").
    4. Reboot and Check:

      • After installation, restart and check if the card appears under:
        • Network Adapters (e.g., "Sierra Wireless EM7455")
        • Modems (e.g., "Sierra Wireless Mobile Broadband Enumerator")

    3. Enable WWAN in BIOS via Smokeless-UMAF

    If the card still doesn’t appear as a WWAN device, the BIOS whitelist is likely blocking it. Use Smokeless-UMAF to disable enforcement:

    1. Create a Bootable USB:

      • Use Rufus to write the Smokeless-UMAF-vX.XX.img file to a USB stick in DD Image mode.
    2. Boot into Smokeless-UMAF:

      • Disable Secure Boot in Windows:
        Settings > Update & Security > Recovery > Advanced Startup > Restart Now > Troubleshoot > Advanced Options > UEFI Firmware Settings.
      • Reboot and boot from the USB stick.
    3. Disable WWAN Whitelist Enforcement:

      • Navigate to:
        Advanced > Device Config > WWAN Whitelist
      • Look for options like:
        • WWAN Whitelist Enforcement → Disable
        • Allow Non-Whitelisted WWAN → Enable
      • Save and exit.
    4. Reboot and Test:

      • Reinsert the EM7455 card (or reboot if already installed) and check Device Manager again.

    4. Check for Hidden Devices in Device Manager

    Sometimes the WWAN device is hidden:

    1. In Device Manager, click View > Show hidden devices.
    2. Look for entries like:
      • Sierra Wireless EM7455
      • QMI WWAN (under Network Adapters or Modems)
    3. If found, right-click and Update Driver manually.

    5. Test with Fibocom L850-GL (Alternative Card)

    If the EM7455 still doesn’t work, test with a Fibocom L850-GL WWAN card (no whitelist required). Steps:

    1. Purchase an L850-GL (e.g., from eBay).
    2. Install it in the WWAN slot with antenna cables.
    3. Install Fibocom drivers:

    The L850-GL should appear as a WWAN device without BIOS mods.

    6. Use AT Commands to Diagnose the EM7455

    If the card is partially recognized, use AT commands to check its status:

    1. Install a terminal program like PuTTY or Tera Term.
    2. Connect to the EM7455’s COM port (found under Ports (COM & LPT) in Device Manager).
    3. Send basic AT commands:
      AT
      OK
      AT!ENTERCND="A710"
      AT!GSTATUS?
      
    4. If the card responds, it’s functional but may need firmware updates or additional drivers.

    🧪 Final Diagnostic Steps

    1. Check PCIe Link Speed:

      • Use PCIeInfo or HWiNFO64 to verify the EM7455 is detected as a PCIe device.
      • If it’s not listed, the card isn’t communicating over PCIe (hardware issue).
    2. Update BIOS:

      • Download the latest BIOS from Lenovo Support.
      • Install it only if the EM7455 is still not detected after driver updates.
    3. Check WWAN AutoConfig Service:

      • Press Win + R, type services.msc.
      • Ensure WWAN AutoConfig is set to Automatic and running.

    📋 Summary

    StepActionOutcome
    1Verify antenna cables, SIM card, and physical installationEnsures hardware is functional
    2Install full Sierra Wireless drivers (WWAN + GPS)Resolves driver mismatches
    3Use Smokeless-UMAF to disable WWAN whitelistBypasses BIOS restrictions
    4Show hidden devices in Device ManagerReveals partially detected devices
    5Test with Fibocom L850-GLConfirms if the issue is card-specific
    6Use AT commands for diagnosticsValidates card communication

    If you’re still stuck, share:

    • Screenshots of Device Manager (with "Show hidden devices").
    • Output from AT commands (if accessible).
    • Whether Smokeless-UMAF showed a WWAN whitelist toggle.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.