In Windows 11 operating system when trying to setup and use secure printing via IPPS…
- User
In Windows 11 operating system when trying to setup and use secure printing via IPPS protocol. When I added a RSA based self-signed certificate of the printing device. So the printing would be allowed only from device with a valid certificate. For some reason Windows does not validate the certificate at all. It prints on the device even without certificate. Is there any way to enable the process of checking the certificate when using IPPS protocol on Windows 11?
Assistant
To enforce certificate validation for IPPS printing on Windows 11, follow these steps:
1. Install the Printer's Certificate as Trusted
- Export the Certificate:
- Access the printer's web interface (HTTPS), click the padlock icon in your browser's address bar > "Certificate" > "Export". Save the certificate (e.g.,
printer-cert.cer).
- Access the printer's web interface (HTTPS), click the padlock icon in your browser's address bar > "Certificate" > "Export". Save the certificate (e.g.,
- Install on Windows:
- Press
Win + R, typecertlm.msc, and press Enter. - Navigate to Trusted Root Certification Authorities > Certificates.
- Right-click the folder > All Tasks > Import.
- Browse to the exported
.cerfile and complete the wizard.
- Press
2. Configure Printer Port for IPPS with Validation
- Remove Existing Port:
- Go to Settings > Bluetooth & devices > Printers & scanners.
- Select your printer > Printer properties.
- Under the Ports tab, note the existing IPPS port (e.g.,
https://ip:631/ipp/print), then delete it.
- Re-add Port with Validation:
- Click Add Port > Standard TCP/IP Port > New Port.
- Enter the printer's IP address. Uncheck "Query the printer..." > Next.
- Select Internet Printing Protocol (https) > Next.
- Enter the full IPPS path:
https://[printer-ip]:631/ipp/print.- Ensure port
631is used (default for IPP/IPPS).
- Ensure port
- Windows should now validate the certificate during setup. If prompted, confirm trust.
3. Enforce Certificate Checks via Registry
- Force Strict Validation:
- Press
Win + R, typeregedit, and press Enter. - Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings - Create a new
DWORD (32-bit) Valuenamed SecureProtocols. - Set its value to
A00(hex) to enable TLS 1.0/1.1/1.2 and strict validation. - Reboot the system.
- Press
4. Verify Printer Configuration
- Printer Security Settings:
- Ensure the printer's admin panel requires IPPS and disables HTTP fallback (refer to printer docs).
- Test Connection:
- Use PowerShell to validate:
Test-NetConnection -ComputerName [printer-ip] -Port 631 - Check certificate trust with:
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = $null Invoke-WebRequest -Uri "https://[printer-ip]:631" -UseBasicParsing- If no errors, the certificate is trusted.
- Use PowerShell to validate:
5. Troubleshooting
- Event Logs: Check
Event Viewer > Windows Logs > Systemfor Schannel errors indicating certificate issues. - Firewall: Ensure port
631(TCP) is open on both Windows and printer firewalls. - Driver Update: Install the latest printer driver from the manufacturer.
- Hostname Mismatch: If the certificate uses a hostname (not IP), add a DNS entry or use the hostname in the IPPS path.
Why Windows Might Not Validate Initially
- Self-Signed Certificates: Windows ignores untrusted certificates by default unless explicitly installed in the Trusted Root store.
- Port Configuration: Manual port setup is required—automatic detection may skip validation.
- Legacy Protocols: Older TLS versions might be disabled in Windows, causing silent failures.
By following these steps, Windows 11 will enforce certificate validation for IPPS printing, blocking connections without a valid trusted certificate.
- Export the Certificate:
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.