Skip to content
TheChatArchiveThe Chat Archive
grok-3-mini-beta· xAIHugging Face LMArena Human Preference 140K

IF I HAVE A BUILDING THAT IS NOT USE GROUP R OR B HOW MANY EV READY SPOTS DO I NEED PER…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-3.3-70b-instruct’s answer.
  1. User

    IF I HAVE A BUILDING THAT IS NOT USE GROUP R OR B HOW MANY EV READY SPOTS DO I NEED PER MASS STRETCH CODE

  2. Assistant

    It looks like you're asking about the requirements for Electric Vehicle (EV) ready parking spots under the Massachusetts Stretch Code for a building that is not classified as Use Group R (Residential) or Use Group B (Business). I'll break this down step by step based on the relevant provisions in the Massachusetts Stretch Energy Code (which incorporates elements from the 2021 International Energy Conservation Code with state-specific amendments).

    Key Points from the Massachusetts Stretch Code

    The Massachusetts Stretch Code promotes energy efficiency and includes requirements for EV infrastructure in new construction or major renovations. These requirements apply to parking facilities associated with buildings, and they vary based on the total number of parking spaces. Since your building is not in Use Group R or B, it likely falls under other use groups (e.g., A for Assembly, E for Educational, F for Factory, M for Mercantile, etc.), and the EV ready spot requirements generally apply to non-residential buildings with parking.

    Here's a summary of the EV ready spot requirements based on the code (specifically, Section C405.12 of the Stretch Code or equivalent provisions):

    • EV Ready Spots Definition: An EV ready spot is a parking space that is pre-wired and equipped with the necessary infrastructure (e.g., conduit, wiring, and a dedicated electrical panel) to support the future installation of an EV charging station. This does not mean the spot must have a charger installed immediately, but it must be "ready" for one.

    • General Requirement: For buildings with parking facilities, the number of EV ready spots is determined by the total number of parking spaces. The code mandates that a percentage of spaces be EV capable (which includes EV ready spots). Specifically:

      • If your building has 15 or more parking spaces, at least 10% of the total parking spaces must be EV capable (EV ready).
      • If your building has fewer than 15 parking spaces, the requirements may vary, but typically:
        • For 5–14 spaces, at least 1 EV ready spot is required in many cases (though this isn't explicitly universal and could depend on local interpretations).
        • For 0–4 spaces, no EV ready spots are generally required.

    Calculating EV Ready Spots for Your Building

    To determine the exact number for your building, you need to know the total number of parking spaces. Here's how it works based on the Stretch Code guidelines:

    • Formula: For buildings with 15 or more parking spaces, calculate 10% of the total.

      • Example: If your building has 50 parking spaces, you need 10% of 50 = 5 EV ready spots.
      • Always round up fractions to the next whole number (e.g., if 10% of 20 spaces is 2, you need 2 spots).
    • Specific Scenarios:

      Total Parking SpacesRequired EV Ready Spots
      0–40
      5–14At least 1 (check local enforcement for exact rules)
      15–2410% of total (e.g., 15 spaces = 2 EV ready spots)
      25 or more10% of total (e.g., 100 spaces = 10 EV ready spots)

    These requirements apply to new construction, additions, or alterations that increase the number of parking spaces. If your building is undergoing a change of use or renovation, it might trigger these standards, so consult with your local building official.

    Important Considerations

    • Exceptions: The Stretch Code might have exceptions for certain building types or situations (e.g., historic buildings or those with space constraints). If your building is in a rural area or has unique circumstances, additional variances could apply.
    • Adoption of the Code: Not all municipalities in Massachusetts adopt the Stretch Code—it's optional. If your area uses the base energy code instead, the EV requirements might be less stringent. Confirm with your local building department or the Massachusetts Department of Energy Resources (DOER).
    • Other Factors: The code may also require EV ready spots to meet specific electrical and safety standards (e.g., dedicated 40-amp circuits). Additionally, some projects might need to comply with accessibility guidelines if the spots are for public use.
    • Resources: For the most accurate and up-to-date information:
      • Review the official Massachusetts Stretch Code document (available on the DOER website: mass.gov/stretch-energy-code).
      • Contact your local building inspector or municipality for a site-specific assessment.
      • If you're in the planning stages, an architect or engineer familiar with Massachusetts codes can help ensure compliance.

    If you provide more details, such as the total number of parking spaces or the specific use group of your building, I can give a more tailored calculation! Remember, building codes can be complex and subject to updates, so always verify with official sources.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.