Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash-preview-04-17· GoogleHugging Face LMArena Human Preference 140K

How would I calculate total variation distance if I only have draws from this…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-3-5-haiku-20241022’s answer.
  1. User

    How would I calculate total variation distance if I only have draws from this distributions

  2. Gemini Assistant

    Okay, if you only have draws (samples) from two distributions, say P and Q, you cannot calculate the exact Total Variation Distance (TVD) between the true underlying distributions P and Q unless you know their forms or have infinite samples. However, you can estimate the TVD using your samples.

    The method for estimation depends heavily on whether your data is discrete or continuous.

    Let X1,…,XnX_1, \dots, X_n be samples from distribution P and Y1,…,YmY_1, \dots, Y_m be samples from distribution Q.

    1. Case 1: Discrete Data

    If your distributions are over a discrete sample space (e.g., counts, categories, integers within a range), this is the most straightforward case.

    • Concept: Estimate the probability of each possible outcome (or each observed outcome) under both distributions using the empirical frequencies in your samples.

    • Steps:

      1. Identify the Sample Space (or observed space): Collect all unique values observed in both sample sets (XiX_i and YjY_j). Let this set of unique values be SobsS_{obs}. Ideally, if you know the full possible sample space Ω\Omega, use that.
      2. Estimate Probabilities for P: For each value x∈Sobsx \in S_{obs}, estimate the probability P^(x)\hat{P}(x) as the proportion of samples from P that are equal to xx: P^(x)=Number of Xi equal to xn\hat{P}(x) = \frac{\text{Number of } X_i \text{ equal to } x}{n}
      3. Estimate Probabilities for Q: Similarly, for each value x∈Sobsx \in S_{obs}, estimate the probability Q^(x)\hat{Q}(x) as the proportion of samples from Q that are equal to xx: Q^(x)=Number of Yj equal to xm\hat{Q}(x) = \frac{\text{Number of } Y_j \text{ equal to } x}{m}
      4. Calculate the Empirical TVD: Use the formula for TVD with the estimated probabilities: TVD^(P,Q)=12∑x∈Sobs∣P^(x)−Q^(x)∣\widehat{TVD}(P, Q) = \frac{1}{2} \sum_{x \in S_{obs}} |\hat{P}(x) - \hat{Q}(x)|
    • Limitations: This method works reasonably well if nn and mm are large and the size of the sample space SobsS_{obs} (or Ω\Omega) is relatively small. If the true distributions have significant probability mass on values not present in SobsS_{obs}, this estimate will be inaccurate.

    2. Case 2: Continuous Data

    If your distributions are over a continuous space (e.g., real numbers), you cannot calculate the probability of a single point. You need to estimate the probability density function (PDF) or cumulative distribution function (CDF).

    • Concept: Estimate the density functions or use binning to approximate the discrete case.

    • Method A: Binning (Histogram Approach)

      1. Define Bins: Divide the range of your observed data (from the minimum of all Xi,YjX_i, Y_j to the maximum) into a set of disjoint intervals or "bins" (B1,B2,…,BkB_1, B_2, \dots, B_k). The choice of the number and width of bins is crucial and affects the result. (e.g., use Scott's rule, Freedman-Diaconis rule, or simply choose a reasonable number).
      2. Estimate Bin Probabilities for P: For each bin BjB_j, estimate the probability P^(Bj)\hat{P}(B_j) as the proportion of samples from P that fall into that bin: P^(Bj)=Number of Xi in Bjn\hat{P}(B_j) = \frac{\text{Number of } X_i \text{ in } B_j}{n}
      3. Estimate Bin Probabilities for Q: Similarly, for each bin BjB_j, estimate the probability Q^(Bj)\hat{Q}(B_j) as the proportion of samples from Q that fall into that bin: Q^(Bj)=Number of Yj in Bjm\hat{Q}(B_j) = \frac{\text{Number of } Y_j \text{ in } B_j}{m}
      4. Calculate the Binned Empirical TVD: Use the discrete TVD formula over the bins: TVD^(P,Q)=12∑j=1k∣P^(Bj)−Q^(Bj)∣\widehat{TVD}(P, Q) = \frac{1}{2} \sum_{j=1}^k |\hat{P}(B_j) - \hat{Q}(B_j)|
      • Limitations: The result is sensitive to the choice of bins. Different binning schemes can give significantly different TVD estimates. This is an approximation that treats the data as discrete over the bins.
    • Method B: Kernel Density Estimation (KDE)

      1. Estimate Densities: Use Kernel Density Estimation to estimate the probability density functions p^(x)\hat{p}(x) from samples XiX_i and q^(x)\hat{q}(x) from samples YjY_j. This requires choosing a kernel function (e.g., Gaussian) and a bandwidth parameter (this choice is crucial).
      2. Numerically Integrate: The TVD for continuous distributions is 12∫∣p(x)−q(x)∣dx\frac{1}{2} \int |p(x) - q(x)| dx. Estimate this integral numerically using the estimated densities: TVD^(P,Q)=12∫∣p^(x)−q^(x)∣dx\widehat{TVD}(P, Q) = \frac{1}{2} \int |\hat{p}(x) - \hat{q}(x)| dx This integral can be approximated by evaluating ∣p^(x)−q^(x)∣|\hat{p}(x) - \hat{q}(x)| on a grid of points and using numerical integration techniques (like the trapezoidal rule or Simpson's rule).
      • Limitations: Highly sensitive to the bandwidth choice in KDE. Requires implementing KDE and numerical integration. Can be computationally more involved.

    Important Considerations:

    • Sample Size: The accuracy of the estimate increases with larger sample sizes (nn and mm).
    • Dimensionality: These methods are easiest to implement for 1D data. For high-dimensional data, density estimation and binning become much harder due to the curse of dimensionality.
    • Bias and Variance: These estimators are empirical and have both bias and variance. Different estimation methods have different statistical properties.
    • Related Distances: The Total Variation Distance is related to, but distinct from, the Kolmogorov-Smirnov (KS) distance, which is based on the maximum difference between the empirical cumulative distribution functions (ECDFs). The KS distance can be calculated easily from samples, but it measures a different aspect of the difference between distributions. While TVD≥12KSTVD \ge \frac{1}{2} KS, one doesn't directly give you the other.

    In summary, you estimate TVD from samples by using empirical frequencies (discrete data or binned continuous data) or estimating and integrating densities (continuous data via KDE). The discrete/binning method is often the simplest to implement.

  3. User

    Assume these are two continuous distributions

  4. Gemini Assistant

    Okay, if you have samples from two continuous distributions, say P and Q, and you don't know the functional form of their probability density functions (PDFs) or cumulative distribution functions (CDFs), you cannot calculate the exact Total Variation Distance (TVD).

    The definition of TVD for continuous distributions with PDFs p(x)p(x) and q(x)q(x) is: TVD(P,Q)=12∫−∞∞∣p(x)−q(x)∣dxTVD(P, Q) = \frac{1}{2} \int_{-\infty}^{\infty} |p(x) - q(x)| dx

    Since you don't know p(x)p(x) and q(x)q(x), you must estimate the TVD from your samples. There are a few common approaches:

    1. Method 1: Binning (Histogram Approach) This is the most common and often simplest method. It essentially converts the continuous problem into a discrete one by grouping data into bins.

      • Steps:

        1. Combine Data: Pool all your samples together to get an idea of the overall range of values.
        2. Define Bins: Divide the range of your data (from the minimum observed value to the maximum observed value, perhaps with some margin) into a set of disjoint intervals (bins). The choice of the number and width of bins is critical and affects the result (this is a major limitation). Common choices include fixed-width bins or bins chosen based on rules like Freedman-Diaconis or Scott's rule, which try to optimize bin width based on data characteristics. Let these bins be B1,B2,…,BkB_1, B_2, \dots, B_k.
        3. Estimate Bin Probabilities for P: For each bin BjB_j, calculate the proportion of samples from distribution P that fall into that bin. Let nPn_P be the total number of samples from P, and nP,jn_{P,j} be the number of samples from P in bin BjB_j. P^(Bj)=nP,jnP\hat{P}(B_j) = \frac{n_{P,j}}{n_P}
        4. Estimate Bin Probabilities for Q: Similarly, for each bin BjB_j, calculate the proportion of samples from distribution Q that fall into that bin. Let nQn_Q be the total number of samples from Q, and nQ,jn_{Q,j} be the number of samples from Q in bin BjB_j. Q^(Bj)=nQ,jnQ\hat{Q}(B_j) = \frac{n_{Q,j}}{n_Q}
        5. Calculate the Binned Empirical TVD: Treat the bins as discrete outcomes and apply the discrete TVD formula: TVD^(P,Q)=12∑j=1k∣P^(Bj)−Q^(Bj)∣\widehat{TVD}(P, Q) = \frac{1}{2} \sum_{j=1}^k |\hat{P}(B_j) - \hat{Q}(B_j)|
      • Pros: Conceptually simple, easy to implement.

      • Cons: The result is highly sensitive to the choice of bins. Different binning schemes can yield very different TVD estimates. This method approximates the continuous distributions with step functions (histograms).

    2. Method 2: Kernel Density Estimation (KDE) This method attempts to estimate the underlying probability density functions (PDFs) directly from the samples.

      • Steps:

        1. Estimate PDFs: Use Kernel Density Estimation on the samples from P to get an estimated density function p^(x)\hat{p}(x), and on the samples from Q to get an estimated density function q^(x)\hat{q}(x). This involves choosing a kernel function (e.g., Gaussian, Epanechnikov) and a bandwidth parameter. The choice of bandwidth is critical and can significantly impact the result.
        2. Numerically Integrate: Once you have the estimated density functions p^(x)\hat{p}(x) and q^(x)\hat{q}(x), you need to numerically approximate the integral: TVD^(P,Q)=12∫−∞∞∣p^(x)−q^(x)∣dx\widehat{TVD}(P, Q) = \frac{1}{2} \int_{-\infty}^{\infty} |\hat{p}(x) - \hat{q}(x)| dx You can do this by:
          • Defining a grid of points across the relevant range of your data (where p^(x)\hat{p}(x) or q^(x)\hat{q}(x) are non-negligible).
          • Evaluating ∣p^(x)−q^(x)∣|\hat{p}(x) - \hat{q}(x)| at each grid point.
          • Using a numerical integration method (like the trapezoidal rule or Simpson's rule) to approximate the integral over the grid.
      • Pros: More directly addresses the continuous nature of the distributions by estimating the densities. Can provide a smoother estimate than binning.

      • Cons: More complex to implement than binning. Highly sensitive to the choice of bandwidth in the KDE step. Requires numerical integration, which introduces its own approximation errors.

    Important Considerations:

    • Sample Size: Both methods provide better estimates with larger sample sizes (nPn_P and nQn_Q). Small samples lead to noisy histograms or KDEs and less reliable TVD estimates.
    • Dimensionality: These methods are easiest for 1D continuous data. Estimating TVD from samples in high dimensions is much harder due to the curse of dimensionality.
    • Choice of Parameters: The biggest challenge in both methods is the choice of parameters (bins for Method 1, bandwidth for Method 2). There are data-driven methods for choosing these parameters, but they are heuristics.
    • Related Distances: Note that the Kolmogorov-Smirnov (KS) distance, which is the maximum vertical distance between the empirical CDFs, is much easier to calculate directly from continuous samples. While related to TVD, it measures a different aspect of distribution difference. TVD≥12KSTVD \geq \frac{1}{2} KS, but one doesn't directly determine the other.

    In summary, for continuous data from samples, you cannot get the exact TVD. You must estimate it. The binning method is simpler but depends heavily on bin choice. The KDE method is more theoretically grounded in density estimation but is more complex and sensitive to bandwidth.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.