Skip to content
TheChatArchiveThe Chat Archive
o3-2025-04-16· OpenAIHugging Face LMArena Human Preference 140K

Can you make a replica of the Psyzbatch 9000?

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Geminigemini-2.5-flash-lite-preview-06-17-thinking’s answer.
  1. User

    Can you make a replica of the Psyzbatch 9000?

  2. Assistant

    I’m not familiar with a device called the “Psyzbatch 9000” (it doesn’t pop up in any common engineering or hobbyist references I know). Could you tell me a bit more about what it does and what sort of replica you’re looking for (function-wise, size, materials, features, etc.)? The more detail you share, the better I can figure out whether it’s feasible and what steps or resources you might need.

  3. User

    Can you design a machine that carefully takes in magic cards, adds the name to an excel sheet with the prices? Also would want it to organize it by set and places it into a slot of many slots so that I can pull the cards out organized?

  4. Assistant

    Below is a complete “from-scratch” concept for a Magic: The Gathering (MtG) card-sorting robot that

    1. Feeds cards one at a time without damaging sleeves/foils
    2. Recognises the card (name + set) with a camera & computer-vision pipeline
    3. Calls an online price API
    4. Logs the details directly into an Excel workbook
    5. Physically drops the card into the correct “set” slot for easy retrieval.

    You can treat this as a blueprint: scale it up, tone it down, or cherry-pick only the subsystems you like.


    1. High-Level Architecture

    ┌──────── Hopper ────────┐
    │  stack of sleeved      │
    │  cards, gentle feed    │
    └─────────┬──────────────┘
              ▼
     ┌────────────────────────────┐
     │ Pick/Feed rollers          │  (Arduino / motor drivers)
     └─────────┬──────────────────┘
               ▼
     ┌────────────────────────────┐
     │ Imaging Station            │  (Raspberry Pi + HQ Camera)
     │  • LED light box           │
     │  • Down-facing 12 MP cam   │
     └─────────┬──────────────────┘
               ▼
     ┌────────────────────────────┐
     │ Vision & Lookup            │  (Python on Pi/mini-PC)
     │ 1. Image crop              │
     │ 2. OCR / classifier        │
     │ 3. Scryfall API → price    │
     │ 4. openpyxl → Excel file   │
     └─────────┬──────────────────┘
               ▼
     ┌────────────────────────────┐
     │ Sorter Gate / Carousel     │  (Stepper +  Lazy-Susan w/ 50–100 bins)
     └─────────┬──────────────────┘
               ▼
         Destination slot
    

    2. Hardware Bill of Materials (rough)

    SubsystemPartQtyEst. Cost (USD)Notes
    Control & VisionRaspberry Pi 4 (4 GB)1$79Runs Python, OCR, price look-up
    Pi HQ Camera + 6 mm lens1$6012 MP, good sharpness
    Arduino Nano1$12Motor control (feed + gates)
    FeedingNeoprene feed rollers2$15Gentle grip (printer salvage OK)
    NEMA17 stepper + driver1$18Controls feed roller
    Optical break-beam sensor2$6Detect card presence
    Lighting4000 K LED strip + driver1$10Even, flicker-free illumination
    SortingLazy-Susan bearing (200 mm)1$7DIY rotating carousel
    NEMA17 stepper + driver1$18Rotates carousel
    3 D-printed card bins600–0–70PLA, 2½ ¢/g
    Misc.PSU 12 V 5 A1$15Drives steppers + LEDs
    Wires, screws, acrylic sheets—~$40Enclosure & deck plate
    TOTAL≈ 350–350–400cheaper if you salvage parts

    3. Card Recognition Pipeline

    1. Capture a top-down image (≈2400 × 1600 px).
    2. Crop 8 % outer border → remove sleeve edge.
    3. Use lightweight CNN (MobileNetV3 or EfficientNet-Lite) fine-tuned on MTG card fronts (15-30 k images).
      • Output: “set_code, collector_number” (e.g., GRN 161).
    4. With set + collector no. you can call Scryfall’s REST endpoint:
    GET https://api.scryfall.com/cards/<set>/<collector_number>
    

    response → JSON → data["name"], data["prices"]["usd"].

    1. OCR fallback (Tesseract) for unknown prints: extract the title line; fuzzy-match against Scryfall /cards/search?q=.

    Why classifier instead of OCR only?
    • Logos + art frame identify language-independent reprints, foil vs nonfoil, showcase variants, etc.
    • Faster (≈70 ms on Pi 4 with TensorFlow Lite).


    4. Logging to Excel (Python snippet)

    import requests, openpyxl, datetime, os
    
    def log_card(set_code, num, name, price):
        wb_path = "mtg_inventory.xlsx"
        if not os.path.exists(wb_path):
            wb = openpyxl.Workbook()
            ws = wb.active
            ws.append(["Timestamp","Set","Collector #","Card Name","USD Price"])
            wb.save(wb_path)
    
        wb = openpyxl.load_workbook(wb_path)
        ws = wb.active
        ws.append([datetime.datetime.now(), set_code, num, name, price])
        wb.save(wb_path)
    

    Call log_card() right after the API lookup.


    5. Mechanical Details

    Feeder
    • Two contra-rotating soft rollers, gap ≈ 0.02 ″ thicker than sleeved card.
    • Under each roller, add a silicone “idler” to keep cards flat.
    • Opto-sensor right after rollers → lets Pi know the card is present at imaging station (stop feed motor).

    Imaging Station
    • Frosted acrylic light table or LED ring + diffused sides.
    • Camera 25 cm above; side walls painted matte-white to kill glare.

    Sorter
    Option A – Rotating Carousel
    • 50–60 wedge-shaped bins glued onto a 3-D-printed platter.
    • Stepper motor (belt drive) turns to angle computed from bin index.
    • Edge of platter sits 1 mm below exit chute; card drops in.

    Option B – Linear Conveyor w/ Diverter Gates
    • 1-m belt + 15 servo-actuated flippers; simpler if you only sort by color, rarity, etc.


    6. Control Firmware (Arduino pseudo)

    // Pins
    const int FEED_STEP = 2;
    const int FEED_DIR  = 3;
    const int SENSOR_IN = 4;
    const int GATE_STEP = 5;
    const int GATE_DIR  = 6;
    
    void setup() {
      pinMode(SENSOR_IN, INPUT_PULLUP);
      Serial.begin(115200);   // USB link to Pi
    }
    
    void loop() {
      if (Serial.available()) {        // wait for "BIN,angle\n"
          String cmd = Serial.readStringUntil('\n');
          if(cmd.startsWith("FEED")){
              feedOneCard();
          } else if(cmd.startsWith("BIN")){
              int angle = cmd.substring(4).toInt();
              rotateCarousel(angle);
          }
      }
    }
    
    void feedOneCard(){
        // run stepper until sensor sees leading edge
    }
    
    void rotateCarousel(int angle) {
        // convert deg → steps; run stepper
    }
    

    Pi sends:

    FEED
    (wait OCR/api/excel)
    BIN 132
    

    7. Software Stack Overview

    LayerTool / LanguagePurpose
    OSRaspberry Pi OS Liteheadless
    VisionPython 3 + OpenCVcapture, preprocess
    MLTensorFlow Liteclassification
    OCR (Fallback)Tesseracttext extraction
    APIrequestsScryfall / TCGplayer
    Excelopenpyxlworkbook write
    UIFlask (optional)web dashboard: live feed, totals
    FirmwareArduino C++stepper & sensor timing

    8. Calibration & Workflow

    1. Print test chart → align camera; ensure full 63 × 88 mm frame is visible.
    2. Run collect_images.py → 100 × random cards to fine-tune exposure.
    3. Train classifier:
      tf.keras.applications.MobileNetV3Small(weights='imagenet', include_top=False)
      
      freeze bottom ¾, retrain last layers (5 epochs).
    4. Build bin_map.json like
      { "GRN": 37, "MH3": 12, "LTR": 5, ... } (bin index).
    5. Daily use:
      • Fill hopper (≈ 150 cards).
      • Hit “Go” on web UI or pushbutton.
      • Machine feeds, logs, sorts; UI shows running count and $ total.

    9. Extensions / Nice-to-Haves

    🪞 Double-sided check: add side camera → flag flips/foils.
    📶 Wi-Fi dashboard → remote start/stop, export CSV.
    🔄 Re-sort by alphabet: rotate carousel to “by name” mapping.
    🛑 Damage detection: CNN to flag creases/inks; dumps card to “reject” slot.
    📦 Final packaging: after each set bin reaches N cards, servo pushes pile into labeled deck box.


    10. Risks & Mitigations

    • Thin foils can curl → add humidity-controlled enclosure.
    • Sleeved cards increase thickness variance → tune roller gap and spring tension.
    • API downtime → cache previous prices; restart gracefully.
    • Legal: Scryfall and TCGplayer allow hobbyist queries but check their TOS if you plan to commercialize.


    11. Timeline (DIY builder, weekends)

    Week 1 – CAD feeder, 3-D-print rollers, basic Arduino feed loop
    Week 2 – Build light box + mount camera
    Week 3 – Write capture script; basic OpenCV crop + Tesseract
    Week 4 – Integrate Scryfall + Excel logging
    Week 5 – Build sorter carousel; firmware for stepper
    Week 6 – Train CNN, swap it in, validate 97 %+ accuracy
    Week 7 – Fit acrylic covers, add web UI, polish


    TL;DR

    Yes, you can absolutely build a “Psyzbatch 9000”-style MTG card robot. Marry a gentle card feeder, a Pi-based vision system, an online price API, and a rotating bin carousel. Budget ≈ $400 and six weekends if you already tinker with 3-D printing, Python, and steppers.

    If any step looks intimidating (training, electronics, 3-D modeling) just shout—happy to dive deeper or simplify. Happy brewing! 🎴🤖

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.