show how an instruction A-B=C will be executed on it, where A=-5 and B=6 (include the…
- User
show how an instruction A-B=C will be executed on it, where A=-5 and B=6 (include the math and the circuit.)
- Assistant
Below is a compact, self-contained walk-through of how a “subtract” instruction
C ← A – Bis carried out in a typical 8-bit, two’s-complement CPU / ALU, using the concrete operands
A = –510 B = 610 (so C should become –1110)The explanation is split into two parts:
- The MATH (bit-by-bit two’s-complement subtraction).
- The CIRCUIT (how a simple ALU actually performs the same thing).
───────────────────────────────────────────────────────────────────────────────
- MATH: doing –5 – 6 in two’s complement ───────────────────────────────────────────────────────────────────────────────
Step-0 Choose a word size
We’ll use an 8-bit word (plenty for these small numbers).Step-1 Encode the operands
A = –510 +510 → 0000 01012 invert → 1111 10102 add 1 → 1111 10112 ← two’s-complement for –5 B = +610 → 0000 01102Step-2 Turn subtraction into addition
A – B = A + (two’s-complement of B)two’s-complement of B: 0000 0110 (B) invert → 1111 1001 add 1 → 1111 1010 ( = –610 )Step-3 Add A and (–B)
1111 1011 (A = –5) + 1111 1010 (–B = –6) ──────────── 1 1111 0101 (9-bit sum; the leading ‘1’ is the carry-out) Throw away the carry-out (fixed word size): 1111 0101 = –11₁₀ So C = 1111 0101₂ = –11₁₀ ✅Bit-by-bit add with carries (for completeness)
Carry-in (Cin) 1 1 1 1 1 0 1 0 (initial Cin = 1 for subtraction) A 1 1 1 1 1 0 1 1 – B 1 1 1 1 1 0 1 0 ──────────────────────── Result 1 1 1 1 0 1 0 1 (throw away LH carry)─────────────────────────────────────────────────────────────────────────────── 2. CIRCUIT: how an ALU does “A – B” ───────────────────────────────────────────────────────────────────────────────
The vast majority of CPUs use ONE adder for both addition and subtraction, switching modes with a single SUB signal.
Below is the canonical scheme (8-bit slice shown).┌────────────┐ A ───────► │ Control line: │ 8-bit │ SUB = 0 → add │ ripple │ SUB = 1 → subtract B ──┬─────► adder │ │ │ (8 × FA) │ │ └────────────┘ │ ▲ │ │ │ │ Cin = SUB ▼ │ XOR ⊕<── SUB ───┘ (inverts B when SUB = 1) (bitwise)Full data path for “C ← A – B”:
-
Registers
• RA holds A (11111011₂)
• RB holds B (00000110₂) -
Control word for this micro-operation
SUB = 1 (select subtraction)
LOADC = 1 (enable write into RC) -
Inside the ALU slice (do this for each of the 8 bits, i = 0…7)
Bᵢ′ = Bᵢ XOR SUB (XOR gate inverts Bᵢ because SUB = 1)
Cin₀ = SUB (initial carry-in = 1 → adds the +1 needed for two’s-complement)
S, Cout = FULL_ADDER(Aᵢ , Bᵢ′ , Cᵢₙ) -
The 8 sums S₇…S₀ emerge as 11110101₂ and are latched into register RC on the next clock edge.
-
Status flags (optional)
• Z (zero) = 0 (result ≠ 0)
• N (neg) = 1 (MSB = 1)
• V (overflow)= 0 (no signed overflow)
• C (carry) = 1 (carry-out discarded in 2’s-comp subtraction)
─────────────────────────────────────────────────────────────────────────────── Key take-aways ─────────────────────────────────────────────────────────────────────────────── • Subtraction in two’s-complement = addition + bit-invert + carry-in 1.
• One physical adder does both jobs; an XOR array and a selectable carry-in make the switch trivial.
• The final answer in our example is C = 11110101₂ = –11₁₀.Hope that makes the connection between the math on paper and the gates in silicon crystal clear! 🚀
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.